Risco lightsys 2 Instruction manual

LightSYS2 Quick User Guide 1
LightSYS2 Quick User Guide
This quick user guide describes the main user operating actions of the LightSYS. To view
the full version of the user manual, please refer to our website www.riscogroup.com.
Register with RISCO Cloud (if enabled)
Registering with RISCO Cloud enables you to monitor and control your system.
1. Go to www.riscocloud.com and click Registe
r
.
2. Enter your first name and last name.
3. Enter your email address as Login Name (required for 1st time activation).
4. Define password (must be: a minimum of eight characters; contain at least one
capital letter and one lower case letter; contain at least one number; and contain at
least one special symbol) and confirm.
5. Enter in the 15 digits Panel ID as it appears: on the panel or supplied by the installer
(also available in the keypad menu as described below).
6. Complete registration form and click Register.
7. To complete registration open the email message received on the email account you
defined as Login Name.
Login to RISCO Cloud
1. . Go to www.riscocloud.com
2. . Enter User Name and Password (same as supplied during the registration process).
3. . Enter Passcode/PIN (LightSYS user code).
4. . Click Enter.
iRISCO – RISCO’s Smartphone Application
Homeowners can now enjoy the iRISCO Smartphone app for smart and easy control of
their LightSYS2 system from any location.
Download the iRISCO app from the Apple App store or Android Play Store (Search for
“iRISCO”).
Locating Panel ID in Keypad
1. From the main display press .
2. Enter master code (default code 1234) followed by .
3. Scroll to the option “View” and press .
4. Scroll to “Service Info” and press .
5. Scroll to “Panel ID” and press ; the15 digit panel ID displays.

2 LightSYS2 Quick User Guide
Interface:
Panda Keypad (RW432KPP)
Full Set Code >
Part Set Code >
System Unset and
Silence an Alarm Code>
Partition Full Set Code > >Partition No. >
Partition Part Set Code > >Partition No. >
Partition Unset Code> > Partition No. >
Duress Unset Duress Code >
Panic Alarm Pressing simultaneously for 2 seconds
Fire Alarm Pressing simultaneously for 2 seconds
Medical Alarm Pressing simultaneously for 2 seconds
Quick Zones Omit Code > [Zone No.]
Activate Output [Code] [Activities] [Output Control]
[Prgrm Output Num]
Define Follow-Me >[Code] [Follow Me] [Define]
View Fault [Code] [View] [Fault]
View Event Log [Code] [Event Log]
Keypad Chime On/Off [Code] [Activities] [Keypad sound]
[Chime]
Edit User Code [Code] [Codes/Tags] [Define]

LightSYS2 Quick User Guide 3
Elegant Keypad (RPKEL/RPKELP)
Full Set Code >
Part Set Code >
System Unset and
Silence an Alarm Code>
Partition Full Set Code > >Partition No. >
Partition Part Set Code > >Partition No. >
Partition Unset Code> > Partition No. >
Duress Unset Duress Code >
Panic Alarm
Pressing simultaneously for 2 seconds
Fire Alarm Pressing simultaneously for 2 seconds
Medical Alarm Pressing simultaneously for 2 seconds

4 LightSYS2 Quick User Guide
LCD Keypad (432KP)
Full Set Code >
Part Set Code >
System Unset and
Silence an Alarm Code>
Partition Full Set Code > >Partition No. >
Partition Part Set Code > >Partition No. >
Partition Unset Code> > Partition No. >
Duress Unset Duress Code >
Panic Alarm Pressing simultaneously for 2 seconds
Fire Alarm Pressing simultaneously for 2 seconds
Medical Alarm Pressing simultaneously for 2 seconds
Quick Zones Omit Code > [Zone No.]
Activate Output [Code] [Activities] [Prgrm Output Num]
Define Follow-Me >[Code] [Follow Me] [Define]
View Fault [Code] [View] [Fault]
View Event Log [Code] [Event Log]
Keypad Chime On/Off [Code] [Activities] [Keypad sound] [Chime]
Edit User Code [Code] [Codes/Tags] [Define]
Zone Testing (Walk Test
)
[Code] [Maintenance] [Walk Test]

LightSYS2 Quick User Guide 5
2-way Slim keypad
Operation Quick High-Security Mode1
Set – System > [Code] 2
Full Set – Partition
Select partition
[1/2/3/4] >
Select partition [1/2/3/4]
> > [Code] 2
Full
Unset > [Code] or Proximity tag (after waking)
Partial Set – System3> [Code]
Partial Set – Partition
Select partition Select partition
[1/2/3/4] > [1/2/3/4] > > [Code]
Partition Unset Select partition 1/2/3/4 and press followed by [Code]
Panic alarm Press + simultaneously for 2 seconds
Fire alarm Press + simultaneously for 2 seconds
Emergency/Med alarm Press + simultaneiously for 2 seconds
Status Request
Press for 2 seconds to view
LED display of system status (see
Indicators below)
Press for 2 seconds
followed by code2to
view LED display of
system status (see
Indicators below)
Output Control Press 1/2/3/4 for 2 seconds Press 1/2/3/4 for 2 seconds
followed by code2
Wake up keypad Press

6 LightSYS2 Quick User Guide
2-way Remote Control Keyfob
Operation Quick High Security Mode1
Full Set > [Code]
Partial Set* > [Code]
Full Unset > [Code]
System
Status for 2 seconds for 2 seconds >
Code
Output Control A/B/C for 2
seconds
for 2
seconds > [Code]
Panic Alarm simultaneously for 2 seconds
Clear Operation
Notes:
*For Part setting with no entry delay, press and hold for two seconds
1. Consult your engineer for the operations defined with a code.
2. The proximity tag can be used instead of code.
3. For Part Setting with no entry delay press for 2 seconds.
4. Light sensor is used to save battery by turning on/off the keypad backlight.
5. Needs to be defined by your engineer.

LightSYS2 Quick User Guide 7
Smartphone
Full Set – System
Full Set – Partition
Partial Set –
System
Partial Set –
Partition
System Unset
> [Code]
Partition Unset
Detector Omit
(On/Off toggle) > >
Web Application
SET/UNSET
Full Set All Partitions or PARTITION x> Full Set
Full Set –
Group
(if suppored)
[Group Letter] > Full Set
Or PARTITION x > [Group Letter]
Part Set All Partitions or PARTITION x> Partial Set
Unset All Partitions or PARTITION x> [Code] >
UNSET

8 LightSYS2 Quick User Guide
SETTINGS
System user and codes Edit, Delete and ADD NEW USERs
Web interface users and
codes Edit user fields and access credentials
Change Password Enter Old/New/Confirm > SET NEW PASSWORD
Quick Zone Omit Select ZONE xx > Omit > Update
Change Appearance Select ZONE xx > Omit > Update
Alerts/Add New
Contact
Enter Name, Email/Mobile phone #.
Select Alert Language, Partition association,
and toggle Set/Unset Email and SMS
Time Zone Select system TIME ZONE
HISTORY
Review activity log and export
AUTOMATION
Programmable Outputs Toggle ON/OFF > Update
Indicators:
LCD and Touchscreen Keypads
(Power):
On: Power OK, No faults
Off: No power
Rapid Flash: System fault
(Ready):
On: Ready to set
Off: Not ready to set
Slow Flash: Ready to set with
open Exit/Entry zone
(Set) / RED LED
On: System set
(Full or Part)
Off: System unset
Slow Flash: System
is in Exit Delay
Rapid Flash:
Alarm
(Tamper) :
On: Tamper alarm
Off: No tamper
alarm
( PartSet/Omit):
On: System part setting/omit
zones in the system
Off: No omitted zones
(Fire):
On: Fire alarm
Off: No fire alarm
Flash: Fire fault
(Proximity) [Touchscreen
only]
Flashing: Indicates keypad has
a proximity reader

LightSYS2 Quick User Guide 9
Panda Keypad Indicators
Fault
On: System Fault
Off: System operating
normally
Ready
On: Ready to set
Off: Not ready to set
Slow flash: System is
ready to be set while
exit/entry zone is open
Set
On: System is armed in Full Set
or Part Set mode
Off: System unset
Slow flash: System in Exit Delay
Rapid flash: Alarm
Partial (Stay) Set / Omit
On: System is Part Set mode
or Zone Omit mode
Off: No omitted zones
Tamper
On: Tamper alarm
Off: No tamper alarm
Cloud connectivity
On: System connected to cloud
Off: No cloud connection
configured Slow flash: Cloud
connectivity fault
2-way Slim Keypad
LED Indicator
Color State Status
Blue Blink During communication with the
panel
Red On
Slow flash
Rapid flash
System fully or partially set
During exit delay
During alarm
Green Blink Fault indication in the system while
the system is unset*
Green/Red Toggle Waiting for code to be entered

10 LightSYS2 Quick User Guide
2-way Keyfob
Operation (Send command)* (Receive Status)
Full Setting Green Red
Part Set Green Orange
Unset Green Green
Alarm Green Flash LED
* If the LED changes to orange, it indicates a low battery condition.
Edit User Code
1. From the main display press .
2. Enter master code (default code 1234) followed by .
3. Scroll to the option Codes/Tags > .
4. Scroll to Define and press .
5. Select a user and press .
6. Select Edit Code and press .
7. Enter the new code followed by .
8. To edit user label scroll to Edit Label and enter label.
9. Repeat the above steps for additional codes.
Assign Proximity Tag
1. Follow steps 1-5 of the Edit User Code above.
2. Select (Re)Write tag and press .
3. Within 10 seconds, approach the proximity tag to the keypad.
Setting and Changing System Time and Date
1. Press and enter grand master code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. The display will show Time & Date. Press .
4. Enter the correct time in 24-hour format and date. For entering the date use the
keys to move the cursor and the / key to toggle among the
choices.
5. Press to save your settings.

LightSYS2 Quick User Guide 11
SMS Control Commands via GSM
To control the system via SMS commands, the system must be equipped with a GSM
module.
SMS Commands
Set: code + S (Example: 1234S) View last alarm : code + AL
Part Set: code + P (Example 1234P) Group Set: code + G + select group A—D
Unset: code + US (Example 1234US) Get SIM credit level: code + CR
Partition Set: code + S + partition number Activate Output:
code + POON + PO number
Partition Part Set: code + P + partition number
Partition Unset: code + US + partition number Deactivate Output:
code + POOFF + PO number
Get system status: code + ST
Omit Zone: code + OM + zone number Change FM number:
code + FMPHONE + FM serial number +
NEW + new phone number
Un-Omit Zone: code + UNOM + zone number
Notes:
1. Command words are not case sensitive (they can contain both capital, small or mixed
lettering).
2. A separator between command words is not required, although it is accepted.
3. Default grand master code is 1234.
4. To receive an acknowledgement reply, add RP to the end of an SMS command.

12 LightSYS2 Quick User Guide
Telephone Control Commands
Remark: Available only if your LightSYS is equipped with a voice module.
Receiving a call:
1. Pick up the phone.
2. Say “Hello” press [#]. You will
hear an event announcement
message.
3. Choose an option from the
Acknowledgment menu.
Acknowledgment menu
Acknowledge message: [1]
Acknowledge and stop all dialing: [2] [User
code] [#]
Access Operations menu: [3] [User code] [#]
Listen and Talk: [6] [3] [User code]
Repeat the event message: [#]
Repeat the Acknowledgment menu: [*]
Calling the System:
1. Dial the number of the
premises.
 If an answering machine is
present at the premises: Let
the line ring once, hang up
and call again.
 If an answering machine is
not in use at the premises:
Wait until the system picks
up. You will hear a
continuous tone.
2.After the tones, enter the 2-digit
remote access code.
3.Enter your user code followed by
[#].
4.Choose your option from the
Operations menu.
Operations Menu:
Arming all Partitions: [1] [1]
Arming by Partition: [1] [9] [Partition no.]
Unsetting all Partitions: [2] [2]
Unsetting by Partition: [2] [9] [Partition no.]
Changing Zone Omit: [3] [Zone no.] [#] [9]
Operating Programmable Outputs: [4] [PO no.]
Changing FM Numbers: [5] [FM no.] [#] [2]
[New phone no.]: [#] [1]
Listen in:[6] [1]
Talk:[6] [2]
Listen and Talk :[6] [3]
Record Messages : [7]
Exiting the System: [0]
Repeat the Menu: [#]
Return to previous menu: [*]
© RISCO Group 2020. All rights reserved.
02/2020 5IN2053 C