RiverRidge 16-031 User manual

RiverRidge®Woodbury Storage Cabinet
with Cubbies and Veggie Bins
ITEM #:16-031
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER TOP BOARD AND PER
SHELF FOR A TOTAL OF 120 POUNDS. DO NOT LOAD SHELVES WITH MORE THAN
20 POUNDS. OVERLOADING WITH MORE THAN 20 POUNDS PER SHELF OR 120
POUNDS TOTAL MAY CAUSE SHELF TO TIP FROM WALL AND CAUSE DAMAGE TO
THE SHELF OR SERIOUS INJURY OR DEATH.

1
2
2
34
4
5
11
11
11
11
10
6
7
8
9
Top Board1PC
QTYNO DESCRIPTION
1
Left Shelf2PCS2
Right Shelf1PC3
Front Panel2PCS4
Left Side Panel1PC5
Right Side Panel1PC6
Middle Support Panel1PC7
Bottom Board1PC8
Left Back Board1PC9
Right Back Board1PC10
Metal Leg4PCS11

Wood Dowel (6x30mm)
Cam Bolt
Cam Lock
Screw (4x35mm)
Machine Screw (6x30mm)
Screw (2.5x10mm)
Washer
6PCS
6PCS
26PCS
26PCS
25PCS
8PCS
8PCS
A
B
C
D
E
F
G
Adjusable Anchor Bracket2PCS
H
Screw (4x10mm)
Plastic Anchor
2PCS
2PCS
2PCS
I
J
KScrew (4x30mm)
TOOLS NEEDED FOR ASSEMBLY : FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
A
A
A
A
A
A
A
A
AA
56
1. Screw 4 cam bolts (A) into cam bolt holes on left side panel (5).
2. Screw 6 cam bolts (A) into cam bolt holes on right side panel (6).
A
HI
HI
A
A
A
A
A
AA
AA
A
A
AAAA
1
7
7
1. Screw 6 cam bolts (A) into cam bolt holes on top board (1).
2. Attach 2 adjustable anchor brackets (H) to top board (1) by inserting 2 screws (I) through
holes on brackets (H), then tighten to top board (1).
3. Screw 4 cam bolts (A) into cam bolt holes on middle support panel (7), then screw 6
cam bolts (A) into cam bolt holes on other side of middle support panel (7).

STEP 3
STEP 4
BB
B
B
BB
BB
B
B B B
6
4
4
3
6
4
7
4
3
1. Attach right shelf (3) and 2 front panels (4) to right side panel (6) by inserting cam bolts (A)
into cam lock holes on right shelf (3) and 2 front panels (4).
2. Insert 6 cam locks (B) into cam lock holes on right shelf (3) and 2 front panels (4), then
rotate clockwise to secure cam bolts (A) in place.
1. Attach middle support panel (7) to right shelf (3) and 2 front panels (4) by inserting cam bolts
(A) into cam lock holes on right shelf (3) and 2 front panels (4).
2. Insert 6 cam locks (B) into cam lock holes on right shelf (3) and 2 front panels (4), then
rotate clockwise to secure cam bolts (A) in place.

STEP 5
STEP 6
66
4
44
4
3
3
2
2
22
77
5
B
B
B
BB
B
B
B
CC
D
DD
D
D
D
C
C
C
C
5
7
8
4
46
1. Attach 2 left shelves (2) to middle support panel (7) by inserting cam bolts (A) into cam lock
holes on 2 left shelves (2).
2. Insert 4 cam locks (B) into cam lock holes on 2 left shelves (2) then rotate clockwise to
secure cam bolts (A) in place.
3. Attach left side panel (5) to 2 left shelves (2) by inserting cam bolts (A) into cam lock holes
on 2 left shelves (2).
4. Insert 4 cam locks (B) into cam lock holes on 2 left shelves (2) then rotate clockwise to
secure cam bolts (A) in place.
1. Insert 6 wood dowels (C) into wood dowel holes on bottom board (8).
2. Attach bottom board (8) to left side panel (5), right side panel (6) and middle support panel
(7) by inserting wood dowels (C) into wood dowel holes on left side panel (5), right side
panel middle support panel (7).
3. Insert 6 screws (D) through holes on bottom board, then tighten to left side panel (5), right
side panel (6) and middle support panel (7).

STEP 7
STEP 8
F
F
FF
F
FF
F
F
F
E
E
E
E
E
E
E
E
E
E
11
11
11
8
511
11
B
B
BB
BB
1
524
76
1. Attach 4 metal legs (11) to bottom board (8) by inserting 8 machine screws (E) through holes
on 8 washers (F), then through holes on metal legs (11), then tighten to bottom board (8).
1. Attach top board (1) to left side panel (5), right side panel (6) and middle support panel (7)
by inserting cam bolts (A) into cam lock holes on left side panel (5), right side panel (6) and
middle support panel (7).
2. Insert 6 cam locks (B) into left side panel (5), right side panel (6) and middle support panel
(7), then rotate clockwise to secure cam bolts (A) in place.

STEP 9
STEP 10
G
G
GG
GG
G
G
G
G
G
G
G
G
G
G
G
G
G
GG
G
G
G
G
10
9
1. Attach left back board (9) and right back board (10) to back of cabinet by inserting 25 screws
(G) through holes on left back board (9) and right back board (10) then tighten to back of
cabinet.
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through holes
on brackets (H). Move cabinet away from wall and screw 2 plastic anchors (J) into wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (K) through holes on metal brackets (H), then tighten to plastic
anchors (J).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (K) through holes on metal brackets (H),
then tighten through drywall and into wood stud.
*Tip: Anchor brackets (H) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten brackets inside cabinet for stability.

IMPORTANT:
Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge® Cabinet!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.

RiverRidge®Kids Two-Piece Folding Storage Bin
ADULT ASSEMBLY REQUIRED
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
For purchases outside of the United States, please contact retailer where purchased.
RiverRidge®is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Distributed by:
Sourcing Solutions, Inc.
Hudson, WI 54016
Made in China