RiverRidge Book Nook 02-161 White User manual

ASSEMBLY INSTRUCTIONS
ITEM #: 02-161 White
RiverRidge®Book Nook
Kids Cubby Storage Tower with Bookshelves
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

This product is suitable for children 3 years and older.
THIS STORAGE TOWER WILL HOLD UP TO 20 POUNDS PER CUBBY AND HAS
A TOP SHELF CAPACITY OF 30 POUNDS OR A TOTAL OF 90 POUNDS. DO NOT
LOAD EACH CUBBY WITH MORE THAN 20 POUNDS. IF OVERLOADED WITH MORE
THAN 20 POUNDS PER CUBBY OR 30 POUNDS ON THE TOP SHELF, THIS MAY
CAUSE DAMAGE TO THE TOWER AND MAY CAUSE SERIOUS INJURY OR DEATH.

Top Board1PC
QTYNO DESCRIPTION
1
Left & Right Support Panel2PCS2
Left & Right Support Panel2PCS3
Bottom Board1PC4
Shelf2PCS5
Cross Bar6PCS6
Side Panel6PCS7
1
22
3
3
4
5
5
6
6
6
6
6
6
77
7
7
7
7
PARTS LIST

Wood Dowel
Cam Bolt
Cam Lock
Screw (4x10mm)
Adjustable Anchor Bracket
Screw (4x30mm)
Plastic Anchor
1PC
12PCS
16PCS
16PCS
1PC
1PC
1PC
A
B
C
D
E
F
G
PARTS LIST
NO PARTS QTY DESCRIPTION
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
STEP 3
A
A
A
A
A
A
A
A
A
A
ED
1
2
B
B
C
C
C
C
C
C
B
B
B
B
2
3
4
5
5
3
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach adjustable anchor bracket (E) to top board (1) by inserting 1 screw (D) through hole on adjustable
anchor bracket (E,) then tighten to top board (1).
1. Screw 3 cam bolts (A) into cam bolt holes on left support panel (2).
2. Screw 3 cam bolts (A) into cam bolt holes on right support panel (3).
3. Repeat above steps for another left support panel (2) and right support panel (3).
×2 ×2
1. Insert 6 wood dowels (C) into wood dowel holes on left support panel (2) and right support panel (3).
2. Attach bottom board (4) and two shelves (5) to left support panel (2) and right support panel (3) by
inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on
bottom board (4) and shelves (5).
3. Insert 6 cam locks (B) into cam lock holes on bottom board (4) and shelves (5), then rotate clockwise to
secure cam bolts (A) in place.

STEP 4
STEP 5
B
B
B
B
C
C
C
C
C
CB
B
4
4
2
2
2
3
6
6
6
6
6
6
5
5
7
7
7
7
1. Slide 4 side panels (7) into grooves on bottom board (4), shelves (5), left side panel (2) and right side
panel (3).
1. Insert 6 wood dowels (C) into wood dowel holes on another left support panel (2) and right support
panel (3).
2. Insert 6 cross bars (6) into slots on left support panel (2) and right support panel (3).
3. Attach other left support panel (2) and right support panel (3) to bottom board (4) and shelf (5) by
inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on
bottom board (4) and shelves (5). Make sure cross bars (6) slide into slots on other left support
panel (2) and right support panel (3).
4. Insert 6 cam locks (B) into cam lock holes on bottom board (4) and shelves (5), then rotate clockwise to
secure cam bolts (A) in place.

BB
BB
1
1. Slide 2 side panels (7) into grooves on left support panels (2) and right support panels (3).
1. Attach top board (1) to left support panels (2) and right support panels (3) by inserting cam bolts (A)
into cam lock holes on left support panels (2) and right support panels (3).
2. Insert 4 cam locks (B) into cam lock holes on left support panels (2) and right support panels (3), then
rotate clockwise to secure cam bolts (A) in place.
STEP 6
STEP 7
7
7

STEP 8
G
G
D
F
F
F
GG
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
Option #1: Securing to Drywall
1. Position storage tower and bracket (D) against wall in desired location. Using a pencil, make a small
mark on wall through hole on bracket (D). Move tower away from wall and screw 1 plastic anchor (F)
into wall on pencil mark.
2. Place tower against wall, insert 1 screw (G) through hole on bracket (D), then tighten to plastic
anchor (F).
Option #2: Securing to Drywall and Wood Stud
1. Position storage tower and bracket (D) against wall in desired location. Insert 1 screw (G) through hole
on bracket (D), then tighten through drywall and into wood stud.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.
*Tip: Anchor bracket (D) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten bracket inside cabinet for stability.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy Your New RiverRidge®Storage Tower!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.

RiverRidge®Kids Two-Piece Folding Storage Bin
ADULT ASSEMBLY REQUIRED
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
For purchases outside of the United States, please contact retailer where purchased.
RiverRidge®is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Distributed by:
Sourcing Solutions, Inc.
Hudson, WI 54016
Made in China