RiverRidge 16-031 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge®Woodbury
Storage Cabinet with Cubbies and Veggie Bins
ITEM #: 16-031
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item.Always use
angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER TOP BOARD AND PER SHELF
FOR A TOTAL OF 120 POUNDS. DO NOT LOAD SHELVES WITH MORE THAN 20
POUNDS. OVERLOADING WITH MORE THAN 20 POUNDS PER SHELF OR 120 POUNDS
TOTAL M AY CAUSE SHELF TO TIP FROM WALL AND CAUSE DAMAGED TO THE SHELF
OR SERIOUS INJURY OR DEATH.

PARTS LIST
NO
QTY
DESCRIPTION
1
1PC
Top Board
2
2PCS
Left Shelf
3
1PC
Right Shelf
4
2PCS
Front Panel
5
1PC
Left Side Panel
6
1PC
Right Side Panel
7
1PC
Middle Support Panel
8
1PC
Bottom Board
9
1PC
Right Back Board
10
1PC
Left Back Board
11
4PCS
Metal Leg

PARTS LIST
NO PART QTY DESCRIPTION
A
26PCS Cam Bolt
B
26PCS Cam Lock
C
6PCS Wood Dowel (6x30mm)
D
6PCS Screw (4X35mm)
E
8PCS Machine Screw (6x30mm)
F
8PCS Shim
G
24PCS Screw (2.5x10mm)
H
2PCS Bracket
I
1PC Screw (2.5x14mm)
J
1PC Plastic Anchor
K
1PC Plastic Lock Strap
L
1PC Screw (4x30mm)
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
TOOL NEEDED FOR SECURING TO WALL: POWER DRILL (NOT INCLUDED)
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com

STEP 1
1. Screw 4 cam bolts (A) into pre-threaded holes on left side panel (5).
2. Screw 6 cam bolts (A) into pre-threaded holes on right side panel (6).
STEP 2
1. Screw 6 cam bolts (A) into pre-threaded holes on top board (1).
2. Screw 4 cam bolts (A) into pre-threaded holes on middle support panel (7), then screw 6 cam bolts (A)
into pre-threaded holes on another side of middle support panel (7).
STEP 3
1. Attach right shelf (3) and 2 front panels (4) to right side panel (6) by inserting cam bolts (A) into cam
lock holes on right shelf (3) and 2 front panels (4).
2. Insert 6 cam locks (B) into cam lock holes on right shelf (3) and 2 front panels (4), then rotate clockwise
to secure cam bolts in place.

STEP 4
1. Attach middle support panel (7) to right shelf (3) and 2 front panels (4) by inserting cam bolts (A) into
cam lock holes on right shelf (3) and 2 front panels (4)
2. Insert 6 cam locks (B) into cam lock holes on right shelf (3) and 2 front panels (4), then rotate clockwise
to secure cam bolts in place.
STEP 5
1. Attach 2 left shelves (2) to middle support panel (7) by inserting cam bolts (A) into cam lock holes on 2
left shelves (2).
2. Insert 4 cam locks (B) into cam lock holes on 2 left shelves (2), then rotate clockwise to secure cam
bolts in place.
3. Attach left side panel (5) to 2 left shelves (2) by inserting cam bolts (A) into cam lock holes on 2 left
shelves (2).
4. Insert 4 cam locks (B) into cam lock holes on 2 left shelves (2), then rotate clockwise to secure cam
bolts in place.

STEP 6
1. Insert 6 wood dowels (C) into wood dowel holes on bottom board (8).
2. Attach bottom board (8) to left side panel (5), right side panel (6) and middle support panel (7) by
inserting wood dowels (C) into wood dowel holes on left side panel (5), right side panel (6) and middle
support panel (7).
3. Insert 6 screws (D) through holes on bottom board, then tighten to left side panel (5), right side panel
(6) and middle support panel (7).
STEP 7
1. Attach 4 metal legs (11) to bottom board (8) by inserting 8 machine screws (E) through the holes on
shims (F), then through the holes on metal legs (11) and tighten to bottom board (8).

STEP 8
1. Attach top board (1) to left side panel (5), right side panel (6) and middle support panel (7) by inserting
cam bolts (A) into cam lock holes on left side panel (5), right side panel (6) and middle support panel
(7).
2. Insert 6 cam locks (B) into left side panel (5), right side panel (6) and middle support panel (7), then
rotate clockwise to secure cam bolts in place.
STEP 9
1. Attach left back board (10) and right back board (9) to the back of cabinet by inserting 24 screws (G)
through holes on left back board (10) and right back board (9), then tighten to back of cabinet.

STEP 10
1. Place drawing with hole position in desired location on wall and drill hole on wall.
2. Insert 1 plastic anchor (J) into hole on wall.
3. Attach 1 bracket (H) to plastic anchor (J) by inserting 1 screw (L) through hole on bracket (H), then
tighten to plastic anchor (J).
4. Attach another bracket (H) to back of cabinet by inserting 1 screw (I) through hole on bracket (H), then
tighten to back of cabinet.
STEP 11
1. Place cabinet against wall and close to bracket (H).
2. Insert plastic lock strap (K) through hole on bracket (H) on cabinet, then through hole on bracket (H)
on wall and fasten plastic lock strap (K) to fix 2 brackets (K) firmly together.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts.Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge® Cabinet!
Thank you for purchasing this RiverRidge® Home item.We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson,WI 54016

ASSEMBLY INSTRUCTIONS
RiverRidge®KidsTwo Piece Folding Storage Bin
ADULT ASSEMBLY REQUIRED

1. Take the bottom board out from the folded soft bin.
2. Open the folded storage bin, then put the bottom board into the soft bin. (making
sure the cloth tab is facing up)
Thank you for purchasing this RiverRidge® Home item.We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson,WI 54016