RiverRidge Somerset 06-136 User manual

ASSEMBLY INSTRUCTIONS
ITEM #: 06-136 White
RiverRidge®Somerset Tall Corner Cabinet
ADULT ASSEMBLY REQUIRED
WARNING SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 100
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 100 POUNDS
TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 100
POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS
INJURY OR DEATH.

PARTS LIST
2
1
3
4
4
4
5
6 7
89
10 11
12
13 14
NO QTY DESCRIPTION
1 1PC Top Board
2 1PC Upper Left Side Panel
3 1PC Upper Right Side Panel
4 3PCS Fixed Shelf
5 1PC Middle Connection Board
6 1PC Upper Left Side Board
7 1PC Upper Right Side Board
8 1PC
9 1PC
10 1PC
Lower Right Side Panel
Lower Left Side Board
Lower Left Side Panel
11 1PC Lower Right Side Board
12 1PC Adjustable Shelf
13 1PC
14 1PC Right Door
Left Door

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
PARTS LIST
NO QTYPARTS DESCRIPTION
A30PCS
B30PCS
C24PCS
Cam Bolt
D
E
F
G
H
I
J
K
L
M
N
4PCS
18PCS
4PCS Machine Screw (4x18mm)
Handle
Shelf Holder
Plastic Anchor
Magnet with 2 Screws
Magnet Plate
Screw (4x30mm)
Screw (4x45mm)
Long Wood Dowel
2PCS
6PCS
4PCS
1 SET
2PCS
18PCS
4PCS
4PCS
Screw (3x12mm)
Wood Dowel
Cam Lock
Hinge

STEP 1
STEP 2
A
A
A
A
A
A
C
C
L
L
23
4
4
7
1. Screw 5 cam bolts (A) into pre-threaded holes on upper left side panel (2).
2. Screw 5 cam bolts (A) into pre-threaded holes on upper right side panel (3).
1. Insert 2 wood dowels (C) into wood dowel holes in 2 fixed shelves (4).
2. Attach 2 fixed shelves (4) to upper right side board (7) by inserting wood dowels (C) into
wood dowel holes on upper right side board (7).
3. Insert 2 screws (L) through holes on upper right side board (7), then tighten to fixed shelves (4).

STEP 3
STEP 4
C
C
L
L
L
4
46
7
B
B
B
B
B
C
C
3
6
7
4
4
1. Insert 4 wood dowels (C) into wood dowel holes on upper left side board (6).
2. Attach upper left side board (6) to fixed shelves (4) and upper right side board (7) by inserting
wood dowels (C) into wood dowel holes on upper right side board (7) and fixed shelves (4).
3. Insert 5 screws (L) through holes on upper left side board (6), then tighten to upper right side
board (7) and fixed shelves (4).
1. Insert 2 wood dowels (C) into wood dowel holes on upper right side board (7).
2. Attach upper right side panel (3) to upper right side board (7) and fixed shelves (4) by
inserting wood dowels (C) into wood dowel holes on upper right side panel (3) and inserting
cam bolts (A) into cam lock holes on upper right side board (7) and fixed shelves (4).
3. Insert 3 cam locks (B) into cam lock holes on upper right side board (7) and 2 cam locks (B)
into cam lock holes on fixed shelves (4), then rotate clockwise to secure cam bolts in place.

STEP 5
STEP 6
1
5A
J
A
A
A
A
A
J
2
B
B
B
B
C
C
6
7
1. Insert 2 wood dowels (C) into wood dowel holes on upper left side board (6).
2. Attach upper left side panel (2) to upper left side board (6) and fixed shelves (4) by inserting
wood dowels (C) into wood dowel holes on upper left side panel (2) and inserting cam
bolts (A) into cam lock holes on upper left side board (6) and fixed shelves (4).
3. Insert 3 cam locks (B) into cam lock holes on upper left side board (6) and 2 cam locks (B)
into cam lock holes on fixed shelves (4), then rotate clockwise to secure cam bolts in place.
1. Screw 6 cam bolts (A) into pre-threaded holes on top board (1).
2. Screw 6 cam bolts (A) into pre-threaded holes on middle connection board (5).
3. Attach magnet with 2 screws (J) to middle connection board (5) by inserting 2 screws through
holes on magnet (J), then tighten to middle connection board (5).
4
4

STEP 7
STEP 8
7
B
BB
B
B
BCC
CC
6
1
7
C
C
N
N
N
N
6
1
3
2
5
L
L
L
1. Insert 2 wood dowels (C) into wood dowel holes on upper left side board (6) and 2 wood
dowels (C) into wood dowel holes on upper right side board (7).
2. Attach top board (1) to upper left side board (6), upper right side board (7), upper left side
panel (2) and upper right side panel (3) by inserting wood dowels (C) into wood dowel holes
on top board (1) and inserting cam bolts (A) into cam lock holes on upper left side board (6),
upper right side board (7), upper left side panel (2) and upper right side panel (3).
3. Insert 2 cam locks (B) through cam lock holes on upper left side board (6), 2 cam locks (B)
through cam lock holes on upper right side board (7), 1 cam lock (B) through cam lock hole
on upper left side panel (2) and 1 cam lock (B) through cam lock hole on upper right side
panel (3), then rotate clockwise to secure cam bolts in place.
1. Insert 1 wood dowel (C) into wood dowel hole on upper left side panel (2) and 1 wood
dowel (C) into wood dowel hole on upper right side panel (3).
2. Attach middle connection board (5) to pre-assembled unit by inserting wood dowels (C) into
wood dowel holes on middle connection board (5).
3. Insert 6 screws (L) through holes on middle connection board (5), then tighten to upper left side
board (6), upper right side board (7), upper left side panel (2) and upper right side panel (3).
4. Insert 4 long wood dowels (N) into wood dowel holes on middle connection board (5).

STEP 9
STEP 10
A
A
A
AA
A
A
A
8
9
C
L
4
11
1. Screw 4 cam bolts (A) into pre-threaded holes on lower left side panel (8).
2. Screw 4 cam bolts (A) into pre-threaded holes on lower right side panel (9).
1. Insert 1 wood dowel (C) into wood dowel hole on fixed shelf (4).
2. Attach fixed shelf (4) to lower right side board (11) by inserting wood dowel (C) into wood
dowel hole on lower right side board (11).
3. Insert 1 screw (L) through hole on lower right side board (11), then tighten to fixed shelf (4).

BB
B
B
C
C
11
STEP 11
STEP 12
4
C
C
C
L
L
L
L
11
4
10
10
9
1. Insert 2 wood dowels (C) into wood dowel holes on lower right side board (11) and 1 wood
dowel (C) into wood dowel hole on fixed shelf (4).
2. Attach lower left side board (10) to lower right side board (11) and fixed shelf (4) by inserting
wood dowels (C) into wood dowel holes on lower left side board (10).
3. Insert 4 screws (L) through holes on lower left side board (10), then tighten to lower right side
board (11) and fixed shelf (4).
1. Insert 2 wood dowels (C) into wood dowel holes on lower right side panel (9).
2. Attach lower right side panel (9) to lower right side board (11) and fixed shelf (4) by inserting
wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on
lower right side board (11) and fixed shelf (4).
3. Insert 3 cam locks (B) through cam lock holes on lower right side board (11) and 1 cam lock (B)
through cam lock hole on fixed shelf (4), then rotate clockwise to secure cam bolts in place.

STEP 13
STEP 14
4
10
8
11
B
B
B
C
C
10
11
B
BB
B
BB
7 6
1
1. Insert 2 wood dowels (C) into wood dowel holes on lower left side panel (8).
2. Attach lower left side panel (8) to lower left side board (10) and fixed shelf (4) by inserting
wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on
lower left side board (10) and fixed shelf (4).
3. Insert 3 cam locks (B) through cam lock holes on lower left side board (10) and 1 cam lock (B)
through cam lock hole on fixed shelf (4), then rotate clockwise to secure cam bolts in place.
1. Attach upper assembled unit to lower assembled unit by inserting cam bolts (A) into cam lock
holes and inserting long wood dowels (N) into wood dowel holes on lower left side board (10),
lower right side board (11), lower left side panel (8) and lower right side panel (9).
2. Insert 2 cam locks (B) into cam lock holes on lower left side board (10), 2 cam locks (B) into
cam lock holes on lower right side board (11), 1 cam lock (B) into cam lock hole on lower left
side panel (8) and 1 cam lock (B) into cam lock hole on lower right side panel (9), then
rotate clockwise to secure cam bolts in place.

STEP 15
STEP 16
10
13
E
E
13 14
D
E
K
G
F
D
E
D
D
D
E
D
DD
E
E
EE
E
E
F
F
G
GK
K
1. Attach 2 hinges (D) to left door (13) by inserting 4 screws (E) through holes on hinges (D),
then tighten to left door (13).
2 Attach magnet plate (K) to left door (13) by inserting 1 screw (E) through hole on magnet
plate (K), then tighten to left door (13).
3. Attach handle (G) to left door (13) by inserting 2 machine screws (F) through holes on left
door (13), then tighten to handle (G).
4. Repeat above steps to assemble 2 hinges (D), magnet plate (K) and handle (G) to right
door (14).
1. Attach left door (13) to cabinet by inserting 4 screws (E) through holes on hinges (D), then
tighten to lower left side panel (8)

STEP 17
STEP 18
1. Attach right door (14) to cabinet by inserting 4 screws (E) through holes on hinges (D), then
tighten to lower right side panel (9).
1. Insert 6 shelf holders (H) into holes on lower left side panel (8), lower right side panel (9),
lower left side board (10) and lower right side board (11). Make sure all shelf holders are at
same level.
2. Place adjustable shelf (12) onto shelf holders (H).
12
HH
H
11
14
E
E
D
D
E
D

STEP 19
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2
OPTION #1
WOOD
STUD
I
I
M
MM
I
I
I
I
MM
MM
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 4 small marks on wall through
holes on upper left side board (6), upper right side board (7), lower left side board (10) and lower right
side board (11). Move cabinet away from wall and screw 4 plastic anchors (I) into wall on pencil marks.
2. Place cabinet against wall, insert 4 screws (M) through holes on upper left side board (6), right side
board (7), lower left side board (10) and lower right side board (11), then tighten to plastic anchors (I).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 4 screws (M) through holes on upper left side
board (6), upper right side board (7), lower left side board (10) and lower right side board (11), then
tighten through drywall and into wood stud.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure youritem is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
Enjoy your new RiverRidge®Cabinet!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016