RiverRidge 02-068/06-092 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge®3 Tier Ladder Shelf
ITEM #: 02-068/06-092 WHITE
ITEM #: 02-069/06-093GRAY
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60
POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER
SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE
SERIOUS INJURY OR DEATH.

6
PARTS LIST
NO
PARTS
QTY
DESCRIPTION
A
28 PCS
WOOD DOWEL
B
4 PCS
CAM BOLT
C
4 PCS
CAM LOCK
D
12 PCS
MACHINE SCREW (6 X 20MM)
E
27 PCS
WOOD SCREW (3.5 X 25MM)
F
1 PC
WALL SCREW (4 X 30MM)
G
1PC
WOOD SCREW (3 X 12MM)
H
1PC
PLASTIC ANCHOR
J
2PCS
BRACKET
K
1PC
PLASTIC LOCK STRAP
1
1PC
TOP SHELF LEFT RAIL BOARD
2
1PC
TOP SHELF RIGHT RAIL BOARD
3
1PC
MIDDLE SHELF LEFT RAIL
BOARD
4
1PC
MIDDLE SHELF RIGHT RAIL
BOARD
5
1PC
BOTTOM SHELF LEFT RAIL
BOARD

NO
PARTS
QTY
DESCRIPTION
6
1PC
BOTTOM SHELF RIGHT
RAIL BOARD
7
1PC
TOP SHELF
8
2 PCS
MIDDLE AND BOTTOM
SHELF
9
2 PCS
REAR RAIL BOARD
10
1PC
OP REAR RAIL BOARD
11
2 PCS
TOP BAR OF LEFT AND
RIGHT SIDE FRAME
12
1PC
LEFT SIDE FRONT LEG
13
1PC
LEFT SIDE REAR LEG
14
1PC
RIGHT SIDE FRONT LEG
15
1PC
RIGHT SIDE REAR LEG
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
TOOL NEEDED FOR SECURING TO WALL: POWER DRILL (NOT INCLUDED)
To order replacement parts at no cost to you, email [email protected],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com

STEP 1
1. Insert 1 wood dowel (A) into wood dowel hole on end of top rear rail board (10).
2. Attach top shelf left rail board (1) to top rear rail board (10) by inserting wood
dowel (A) into hole on top shelf left rail board (1). Make sure hole on top rear rail board (10) is
facing towards back side of shelf.
3. Insert 1 wood screw (E) through hole on top shelf left rail board (1) and tighten to top rear
rail board (10).
4. Repeat above steps to assemble top shelf right rail board (2) to top rear rail board (10).
STEP 2
1. Insert 1 wood dowel (A) into wood dowel hole on end of rear rail board (9)
2. Attach middle shelf left rail board (3) to rear rail board (9) by inserting wood dowel (A)
into hole on middle shelf left rail board (3).
3. Insert 1 wood screw (E) through hole on middle shelf left rail board (3) and tighten to rear rail
board (9).
4. Repeat above steps to assemble middle shelf right rail board (4) to rear rail board (9).

STEP 3
1. Insert 1 wood dowel (A) into wood dowel hole on end of rear rail board (9).
2. Attach bottom shelf left rail board (5) to rear rail board (9) by inserting wood dowel (A)
into hole on bottom shelf left rail board (5).
3. Insert 1 wood screw (E) through hole on bottom shelf left rail board (5) and tighten to rear rail board
(9).
4. Repeat above steps to assemble bottom shelf right rail board (6) to rear rail board (9).
STEP 4
1. Insert 6 wood dowels (A) into wood dowel holes on top shelf (7).
2. Attach top shelf (7) to top shelf rail board assembly of parts (1), (2) and (10) by inserting wood dowels
(A) into wood dowel holes on top shelf left rail board (1), top shelf right rail board (2) and top rear rail
board (10).
3. Insert 7 wood screws (E) through holes on top shelf (7) and tighten to top shelf left rail board (1), top
shelf right rail board (2) and top rear rail board (10).

STEP 5
1. Insert 6 wood dowels (A) into wood dowel holes on middle shelf (8).
2. Attach middle shelf (8) to middle shelf rail board assembly by inserting wood dowels (A) into the
wood dowel holes on middle shelf left rail board (3), middle shelf right rail board (4) and rear rail
board (9).
3. Insert 7 wood screws (E) through holes on middle shelf (8) and tighten to middle shelf left rail
board (3), middle shelf right rail board (4) and rear rail board (9).
STEP 6
1. Insert 6 wood dowels (A) into wood dowel holes on bottom shelf (8).
2. Attach bottom shelf (8) to bottom shelf rail board assembly by inserting wood dowels (A) into
wood dowel holes on bottom shelf left rail board (5), bottom shelf right rail board (6) and rear
rail board (9).
3. Insert 7 wood screws (E) through holes on bottom shelf (8) and tighten to bottom shelf left rail
board (5), bottom shelf right rail board (6) and rear rail board (9).

STEP 7
1. Insert 2 wood dowels (A) into wood dowel holes on top bar (11).
2. Screw 2 cam bolts (B) into pre-threaded holes on top bar (11).
3. Attach top bar (11) to left side front leg (12) and left side rear leg (13) by inserting wood dowels (A)
into wood dowel holes and inserting 2 cam bolts (B) into cam lock holes on left side front leg (12) and
left side rear leg (13).
4. Insert 2 cam locks (C) into cam lock holes on left side front leg (12) and left side rear
leg (13), then rotate clockwise to secure cam bolts in place.
5. Repeat above steps to assemble other top bar (11) to right side front leg (14) and right side rear
leg (15).
STEP 8
1. Attach the pre-assembled top shelf (7) and rail boards to pre-assembled right-side frame by inserting 2
machine screws (D) through holes on right rail board (2) and tighten to pre-assembled right-side frame.
2. Repeat above step to assemble middle and bottom shelf (8) to pre-assembled right-side frame.

STEP 9
1. Attach pre-assembled top shelf（7）and rail boards to pre-assembled left-side frame by inserting
2 machine screws (D) through holes on left rail board (1) and tighten to pre-assembled left-side
frame.
2. Repeat above step to assemble middle and bottom shelf (8) to pre-assembled left-side frame.
STEP 10
1. Attach one bracket (J) to back of ladder shelf by inserting 1 wood screw (G) through hole on bracket
(J) and tighten to back side of top rear rail board (10).
2. Drill hole on wall according to height of bracket (J) and insert plastic anchor (H).
3. Attach one bracket (J) to plastic anchor (H) on wall by inserting 1 wall screw (F) through hole on
bracket (J) and tighten into plastic anchor (H).

STEP 11
1. Place ladder shelf against wall and close to bracket (J).
2. Insert plastic lock strap (K) through hole on bracket (J) assembled on ladder shelf, then through
hole on bracket (J) on wall and fasten plastic lock strap (K) to secure two brackets (J) firmly
together.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge® Cabinet!
Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [email protected],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016