Rohde & Schwarz GSM400-MS User manual

1115.6088.12-12- 1
Test and Measurement
Division
Operating Manual
Software Options:
GSM400/850/900/1800/1900-MS
for CMU-B21
R&S CMU-K20/-K21/-K22/-K23/-K24
1115.5900.02/6007.02/6107.02/6207.02/6307.02
Including the following extensions:
GPRS/EGPRS Software Extension
for all GSM Software Packages
R&S CMU-K42/-K43
1115.4691.02/1115.6907.02
AMR GSM for CMU 200
R&S CMU-K45
1150.3100.02
Printed in the Federal
Republic of Germany
深圳德标仪器 135-1095-0799

Dear Customer,
throughout this manual, CMU-K20 to CMU-K24 and CMU-K42/-43/-K45 is generally used as an abbreviation for software
options R&S CMU-K20 to R&S CMU-K24 and R&S CMU-K42/-K43/-K45. The Universal Radio Communication Tester
R&S CMU 200 is abbreviated as CMU200.
深圳德标仪器 135-1095-0799

CMU-K20/-K21/-K22/-K23/-K24 Contents
1115.6088.12 RE E-3
Tabbed Divider Overview
Safety Instructions
Certificate of Quality
List of R&S Representatives
Contents of Manuals for Universal Radio Communication Tester CMU
Tabbed Divider
1 Chapter 1: Installation
2 Chapter 2: Getting Started
3 Chapter 3: Manual Operation
4 Chapter 4: Functions and their Application
5 Chapter 5: Remote Control – Basics
6 Chapter 6: Remote Control – Commands
7 Chapter 7: Remote Control – Program Examples
10 Index
深圳德标仪器 135-1095-0799

深圳德标仪器 135-1095-0799

CMU-K20/-K21/-K22/-K23/-K24 List of Figures
1115.6088.12 3 E-12
List of Figures
Fig. 4-1 Measurement menu Analyzer/Generator (example: P/t Norm. GMSK).................................4.3
Fig. 4-2 Measurement menu Power – P/t Norm. GMSK.....................................................................4.9
Fig. 4-3 Trigger slot offset and slot count (for Trig. Slot Offset = 3)................................................. 4.18
Fig. 4-4 Display of results (Power – P/t Norm. GMSK).................................................................... 4.20
Fig. 4-5 Display of results (Power – P/t Norm. 8PSK) ..................................................................... 4.22
Fig. 4-6 Display of results (Power – P/t Multislot) ............................................................................ 4.23
Fig. 4-7 Display of results (Power – P/Frame)................................................................................. 4.25
Fig. 4-8 Display of results (Power – P/Slot menu) ........................................................................... 4.26
Fig. 4-9 Display of results (Power – P/Slot Table) ........................................................................... 4.27
Fig. 4-10 Power Configuration – Control............................................................................................ 4.28
Fig. 4-11 GSM power/time template for normal and access bursts with GMSK modulation............. 4.33
Fig. 4-12 GSM power/time template for normal bursts with 8PSK modulation.................................. 4.34
Fig. 4-13 GSM power/time template for multislot configurations ....................................................... 4.34
Fig. 4-14 Power Configuration – Limit Lines...................................................................................... 4.35
Fig. 4-15 Measurement menu Modulation – Ext. Phase Err. GMSK ................................................. 4.39
Fig. 4-16 Display of results (Modulation – Ext. Phase Err. GMSK).................................................... 4.41
Fig. 4-17 Modulation errors in the I/Q vector diagram ....................................................................... 4.44
Fig. 4-18 Modulation errors in the I/Q constellation diagram............................................................. 4.44
Fig. 4-19 Measurement menu Modulation – Overview 8PSK............................................................ 4.45
Fig. 4-20 Display of results (Modulation – Overview) ........................................................................ 4.47
Fig. 4-21 Display of results (Modulation – EVM / Phase Error / Magn. Error)................................... 4.48
Fig. 4-22 Modulation Configuration – Control .................................................................................... 4.51
Fig. 4-23 Modulation Configuration – Limits....................................................................................... 4.52
Fig. 4-24 Measurement menu Spectrum due to Modulation.............................................................. 4.56
Fig. 4-25 Display of results (spectrum due to modulation)................................................................. 4.58
Fig. 4-26 Display of results (spectrum due to switching) ................................................................... 4.60
Fig. 4-27 Spectrum Configuration – Control....................................................................................... 4.61
Fig. 4-28 Spectral mask as specified for GSM mobile stations.......................................................... 4.63
Fig. 4-29 Spectrum Configuration – Limit Lines................................................................................. 4.64
Fig. 4-30 Spectrum Configuration – Limits......................................................................................... 4.66
Fig. 4-31 Spectrum Configuration – Meas X...................................................................................... 4.67
Fig. 4-32 Connection Control – Analyzer (softkey) ............................................................................ 4.69
Fig. 4-33 Bit structure of a GSM normal burst.................................................................................... 4.72
Fig. 4-34 Connection Control – Analyzer (table)................................................................................ 4.73
Fig. 4-35 Connection Control – Generator (softkey).......................................................................... 4.76
Fig. 4-36 Connection Control – Generator (table).............................................................................. 4.79
Fig. 4-37 Connection Control – AF/RF connectors............................................................................ 4.80
Fig. 4-38 Connection Control – Synchronization ............................................................................... 4.82
Fig. 4-39 Connection Control – Trigger.............................................................................................. 4.85
Fig. 4-40 Connection Control – I/Q-IF................................................................................................ 4.87
Fig. 4-41 Signalling states of the CMU (circuit switched mode)......................................................... 4.90
Fig. 4-42 Connection Control – Connection (Signal Off).................................................................... 4.91
Fig. 4-43 Connection Control – Connection (Signal On).................................................................... 4.93
Fig. 4-44 Overview of settings and measurements............................................................................ 4.95
Fig. 4-45 Measurement menu Power – P/t Normal GMSK................................................................ 4.98
Fig. 4-46 Display of measurement results (P/t Normal GMSK menu) ............................................. 4.105
Fig. 4-47 Display of results (Power – P/t Norm. 8PSK) ................................................................... 4.107
深圳德标仪器 135-1095-0799

List of Figures CMU-K20/-K21/-K22/-K23/-K24
1115.6088.12 4 E-12
Fig. 4-48 Display of results (Power – P/t Multislot) .......................................................................... 4.107
Fig. 4-49 Display of measurement results (P/PCL menu)................................................................ 4.108
Fig. 4-50 Display of measurement results (P/t Access Burst menu) ............................................... 4.109
Fig. 4-51 Power Configuration – Limits............................................................................................ 4.113
Fig. 4-52 Measurement menu Modulation ....................................................................................... 4.114
Fig. 4-53 Display of results (modulation menu)................................................................................ 4.115
Fig. 4-54 Measurement menu Spectrum (application Modulation GMSK) ...................................... 4.116
Fig. 4-55 Signal paths for BER measurements................................................................................ 4.120
Fig. 4-56 52-multiframe for PDCH.................................................................................................... 4.122
Fig. 4-57 Comparison between BLER and DBLER: CS4 (left diagram) and CS1........................... 4.123
Fig. 4-58 Single-limit confidence BER.............................................................................................. 4.127
Fig. 4-59 Dual-limit confidence BER ................................................................................................ 4.128
Fig. 4-60 Receiver Quality (BER)..................................................................................................... 4.129
Fig. 4-61 Display of test settings and measurement results (BER) ................................................. 4.132
Fig. 4-62 Display of test settings and measurement results (BLER) ............................................... 4.134
Fig. 4-63 Receiver Quality – Control................................................................................................ 4.138
Fig. 4-64 Receiver Quality Configuration – Limits............................................................................ 4.143
Fig. 4-65 Connection Control – Connection (Synchronized) ........................................................... 4.146
Fig. 4-66 Connection Control – Connection (Alerting)..................................................................... 4.147
Fig. 4-67 Connection Control – Connection (Call Established) ....................................................... 4.148
Fig. 4-68 Connection Control – Handover (destination selection)................................................... 4.152
Fig. 4-69 Connection Control – Handover (Call Pending)................................................................ 4.153
Fig. 4-70 Connection Control – MS Signal (panel, single slot) ........................................................ 4.155
Fig. 4-71 Connection Control – MS Signal (panel, multislot)........................................................... 4.157
Fig. 4-72 Connection Control – MS Signal (table)............................................................................ 4.160
Fig. 4-73 Connection Control – BS Signal (panel, single slot)......................................................... 4.162
Fig. 4-74 Connection Control – BS Signal (panel, multislot)............................................................ 4.165
Fig. 4-75 Connection Control – BS Signal (table)............................................................................ 4.167
Fig. 4-76 Connection Control – Network parameters (panel) .......................................................... 4.170
Fig. 4-77 Connection Control – Network parameters (table) ........................................................... 4.173
Fig. 4-78 Connection Control – AF/RF connectors.......................................................................... 4.179
Fig. 4-79 Group Configuration – Trigger.......................................................................................... 4.181
Fig. 4-80 Group Configuration – Input level..................................................................................... 4.184
Fig. 4-81 Meas. slot and slot count (for Meas. Slot = 3) .................................................................. 4.185
Fig. 4-82 Connection Control – Misc................................................................................................ 4.186
Fig. 4-83 GPRS signalling states ..................................................................................................... 4.189
Fig. 4-84 Connection Control – Connection (Signal Off).................................................................. 4.191
Fig. 4-85 Connection Control – Connection (Idle)............................................................................ 4.193
Fig. 4-86 Connection Control – Connection (Attached)................................................................... 4.194
Fig. 4-87 Connection Control – Connection (TBF Established)....................................................... 4.195
Fig. 4-88 Connection Control – MS Signal (table)............................................................................ 4.196
Fig. 4-89 Connection Control – BS Signal (table)............................................................................ 4.197
Fig. 4-90 Connection Control – Network.......................................................................................... 4.199
Fig. 4-91 Connection Control – Network parameters (AMR)........................................................... 4.204
Fig. 6-1 Signalling states of the CMU and transitions including handover..................................... 6.178
Fig. 6-2 GPRS signalling states of the CMU and transitions ......................................................... 6.213
深圳德标仪器 135-1095-0799

CMU-K20/-K21/-K22/-K23/-K24 List of Tables
1115.6088.12 5 E-12
List of Tables
Table 3-1 Measurement groups in Signalling and Non Signalling mode............................................3.4
Table 4-1 GSM tolerances for spectrum due to modulation............................................................. 4.62
Table 4-2 GSM tolerances for spectrum due to modulation (absolute)............................................ 4.63
Table 4-3 GSM tolerances for spectrum due to switching plus modulation effects:......................... 4.65
Table 4-4 GSM channels in uplink direction ..................................................................................... 4.70
Table 4-5 GSM channels in downlink direction................................................................................. 4.77
Table 4-6 I/Q-IF scenarios and path settings.................................................................................... 4.88
Table 4-7 GSM Power classes........................................................................................................ 4.112
Table 4-8 GSM Power control levels (PCL).................................................................................... 4.112
Table 4-9 BLER and DBLER measurement settings...................................................................... 4.121
Table 4-10 Frame structure for Main Service: Circuit Switched ....................................................... 4.123
Table 4-11 Frame structure for Main Service: Packet Data, Service Selection:
Red. Sig.– EGPRS sym.................................................................................................. 4.124
Table 4-12 Frame structure for Main Service: Packet Data, Service Selection:
Red. Sig.– EGPRS asym................................................................................................ 4.124
Table 4-13 Frame structure for Main Service: Packet Data, any other Service Selection ............... 4.124
Table 4-8 Definition of RX Level ..................................................................................................... 4.136
Table 4-9 Definition of RX Quality................................................................................................... 4.136
Table 4-10 MS multislot classes ....................................................................................................... 4.149
Table 4-11 AMR Rate Set according to the conformance test specification .................................... 4.203
Table 5-1 Measurement objects in Signalling and Non Signalling mode ............................................5.3
Table 5-2 Repetition mode in remote control.......................................................................................5.5
Table 5-3 Limits and limit check...........................................................................................................5.6
Table 5-4 Meaning of the bits used in the STATus:OPERation:CMU:SUM1|2:CMU<nr>
sub-registers assigned to GSMxxx-MS Non Signalling.......................................................5.7
Table 5-5 Meaning of the bits used in the STATus:OPERation:CMU:SUM1|2:CMU<nr>
sub-registers assigned to GSMxxx-MS Signalling...............................................................5.7
Table 6-1 Remote control commands: Non Signalling ................................................................... 6.228
Table 6-2 Remote control commands: Signalling mode................................................................. 6.256
Table 6-3 Remote control commands: Non Signalling mode ......................................................... 6.296
Table 6-4 Remote control commands: Signalling mode................................................................. 6.309
深圳德标仪器 135-1095-0799

深圳德标仪器 135-1095-0799

Qualitätszertifikat
Sehr geehrter Kunde,
Sie haben sich für den Kauf eines Rohde &
Schwarz-Produktes entschieden. Hiermit
erhalten Sie ein nach modernsten Ferti-
gungsmethoden hergestelltes Produkt. Es
wurde nachden Regeln unseresQualitäts-
managementsystems entwickelt, gefer-
tigt und geprüft. Das Rohde & Schwarz-
Qualitätsmanagementsystemistu.a.nach
ISO 9001 und ISO14001 zertifiziert.
Certificate of quality
Dear Customer,
You have decided to buy a Rohde &
Schwarz product. You are thus assured of
receiving a product that is manufactured
using the most modern methods available.
This product was developed, manufac-
tured and tested in compliance with our
quality management system standards.
The Rohde & Schwarz quality manage-
ment system is certified according to stan-
dards such as ISO9001 and ISO14001.
Certificat de qualité
Cher client,
Vous avez choisi d'acheter un produit
Rohde & Schwarz. Vous disposez donc
d'un produit fabriqué d'après les métho-
des les plus avancées. Le développement,
la fabrication et les tests respectent nos
normes de gestion qualité. Le système de
gestion qualité de Rohde & Schwarz a été
homologué, entre autres, conformément
aux normes ISO 9001 et ISO14001.
Certified Quality System
ISO 9001
Certified Environmental System
ISO 14001
DQS REG. NO 1954 QM
DQS REG. NO 1954 UM
深圳德标仪器 135-1095-0799

深圳德标仪器 135-1095-0799