Rointe Kyros User manual

MANUAL DE INSTRUCCIONES
MONTAJE, INSTALACIÓN, PUESTA EN
MARCHA Y FUNCIONAMIENTO
MANUEL D’INSTRUCTIONS
MONTAGE, INSTALLATION, MISE EN
MARCHE ET FONCTIONNEMENT
MANUAL DE INSTRUÇÕES
MONTAGEM, INSTALAÇÃO, LIGAÇÃO
E FUNCIONAMENTO
BEDIENUNGSANLEITUNG
MONTAGE, ANBRINGUNG, INBETRIEBNAHME
UND FUNKTIONSWEISE
INSTRUCTIONS MANUAL
MOUNTING, INSTALLATION,
STARTING AND OPERATION
RADIATOR - RADIADOR - RADIATEUR - RADIADOR - HEIZKÖRPER
KYROS

KYROS
4
1. DESCRIPTION OF THE “KYROS ” RADIATOR
1.1. Front panel parts
TFT DISPLAY
CONTROL PANEL

5
1.1.1. TFT display symbols
SEGMENT INDICATION
1PROGRAMMING
2DAYS OF THE WEEK
3TIME OF DAY
4TEMPERATURE SELECTED
5LOCKING THE CONTROL PANEL
6MANUAL/AUTOMATIC FUNCTION
7COMFORT/ECONOMY/ANTI-FROST MODE
8RADIATOR ON
9OPEN WINDOW FUNCTION
1.2. Switching On & Off (stand-by)
By pressing the key , we can switch the radiator on or off. The following image will appear
on the screen when switched on:
The screen will automatically go into sleep mode if no button is pushed for 10 seconds. By
pushing the button again the radiator will go into standby mode with the word “Standby”
appearing followed by the Rointe logo.
1
2
3
4
5
67
8
9

KYROS
6
1.3. Setting the day and time
By pressing the button for 3 seconds, we can access the time and date adjust feature to
adjust the time and date of our radiator.
Pressing the button , flashes up the hours, minutes and days of the week according to the
number of times it is pressed. With the buttons and we can alter the current settings.
To leave the time and date adjust feature, wait 30 seconds or press after the date select.
1.4. Blocking the control panel
By pressing the keys and , at the same time for 3 seconds, we block the control panel,
the control panel symbol is activated, and the keys will not respond when pressed. The
following symbol will appear on the screen if any button is pushed:
To unblock, press again the keys and , at the same time for 3 seconds.
1.5. Temperature selection
By pressing or we change the temperature. When the room temperature is lower than
the one set, the radiator comes on, the symbol appearing.
1.6. Manual/Automatic functions
By pressing we change between the Manual and Automatic functions.
When the Manual function is selected, the symbol appears on the display. When the
Automatic function is selected, the symbol appears on the display.
1.6.1. Manual function
This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.5.
ICON MODE TEMPERATURE RANGE
COMFORT 20ºC –30ºC
ECO 15ºC –19,5ºC
ANTI-FROST 8ºC
1.6.2. Automatic function
This mode activates the programming set on the radiator.
1.7. Menu/Programming function
By repeatedly pressing we can see the programming that is saved in the radiator for each
day. Pressing only once shows day one, twice shows day two and so on.
Pressing for 3 seconds allows you to program the radiator directly:
1. Select the CONFORT temperature setting (20ºC to 30ºC), using and .The symbol
and the temperature will flash.

7
2. Press and we can select using and the ECO temperature (15ºC to 19.5ºC).
The symbol and the temperature will flash.
3. After pressing the button once again, the numbers of the week will start flashing and
show as SEL1, SEL2, SEL3…. We can go forwards and backwards using the button and
. Press to select the day that we wish to program.
4. Pressing , takes us to the hour we wish to program. To change the hours use the or
, buttons. The hours selected will show as (0h, 1h, 2h,…). By pressing the button,
we can select hour by hour the mode required: CONFORT, ECO or OFF.
5. To finish the programming press or leave it for 30 seconds without pressing any buttons.
1.8. “Open Window” function
This function is activated when the probe detects a reduction of 4º in respect of the set
temperature during 30 minutes. On activation the following image will appear on the radiator
display for 5 seconds:
When the “Open window” function is activated, the following screen will appear showing that
the anti-frost mode is activated:
This function will be active for 2 hours. If the button is pushed during this period the
radiator will switch off. Pushing the button again will switch on the radiator without the
“Open window” function being switched on.
1.9. Screen brightness function
You can change the brightness of the screen by pushing the button for 3 seconds when
the product is in manual mode. Entering this mode you will see the following screen:

KYROS
8
In ON mode you can increase or decrease the brightness of the screen by using the and
buttons.
You can change the “Standby” mode brightness by pushing the button to move the frame
to the “STAND-BY” position. You can then adjust the brightness by pushing the same and
keys.
To finish the programming wait for 10 seconds without pressing any buttons.
2. INSTALLATION & MOUNTING
The radiator must never be installed immediately below a power point.
In bathrooms, the radiator must never be installed where the switches and other devices may
be within the reach of someone in the shower or bathtub.
2.1. Mounting
The KYROS radiator works by means of natural air convection (Figure 1). In order to achieve
optimal functioning and an even distribution of heat, the lower part of the radiator, once
mounted on the wall, must be at least 10 to 12 cm from the floor, and 30 cm at the most.
Fig. 1 Fig. 2
Minimum
10 cm. Minimum
10 cm.
Minimum
10 cm.
Minimum
10 cm.