Roland VersaUV LEC2-300 User manual

TERMS OF USE
Users of this Product Guide shall be deemed to agree with the following Terms of Use.
1. USERS
This Product Guide is only for authorized persons with user ID and password issued by Roland DG
Corporation.
2. PURPOSE
Authorized persons can use this Product Guide only for the purposes of selling and providing to
the customers maintenance service of LEC2-300.
3. REUSE
Authorized persons shall not disclose, transfer, rent or distribute this Product Guide to, or allow
this Product Guide to be used in any manner by, any third party other than authorized persons.
4. REPRODUCTION
Authorized persons shall not copy, change or alter this Product Guide without permission of
Roland DG Corporation.
5. EFFECT OF VIOLATION
Regardless of circumstances, we will vigorously respond to any violation hereof, through legal
action.
Copyright ©2019 ROLAND DG CORPORATION

Product Guide
Version 1.0 November 29, 2019
LEC2-300
Confidential

2/42
CONFIDENTIAL
Version Date Contents
0.9 October 3, 2019 Preliminary version
1.0 November 29, 2019 First Edition

3/42
CONFIDENTIAL
Contents
1. Product Information
2. Printing Theory
3. Ink Line
4. Ink
5. Cutting Function
6. Other Features
7. Special Pump Operations
8. Maintenance
9. Software
10. Installation
11. Periodic Replacement Parts

4/42
CONFIDENTIAL
⚫LEC2-300
Series name: VersaUV
❖30 inch UV Print & Cut device
Overview
❖Ink cartridge
-EUV4
-Capacity: 220 ml/500 ml (220 ml only for Wh)
❖Ink type
-CMYKGlWh (6 colors)
-CMYK (4 colors)
❖Supported software
-VersaWorks
-Roland Status Monitor
❖Option
-TU4
1.Product Information

5/42
CONFIDENTIAL
⚫Overview
Compactly designed 30-inch UV print
and cut device based on VS-i series
1.Product Information
UV4 Ink New UV lamp
TU4
Discharged fluid weight sensor
Drain bottle (capacity: 2L)
Perforated
cutting
New print head
VersaWorks
Roland Status
Monitor
Nozzle mask Multiple crop
marks

6/42
CONFIDENTIAL
⚫Specifications
1.Product Information
2070mm
800 mm
850 mm
LEC2-300
Loadable Media Width
182
to 762 mm, Roll diameter no greater than 210 mm
Printable Area
Max.
739 mm
Media Weight
Max.
25 kg
Dimensions with stand
1,934[W] x 795[D] x 1,330[H] mm
Weight with stand
1
19 Kg
Power consumption
100
-120V: During Operation 270 W, Sleep mode 40 W
220
-240V: During Operation 270 W, Sleep mode 40 W
Packaging dimensions (including skid)
2,070
[W] x 850[D] x 800[H] mm
Packaging Weigh
(including skid)
165 kg

7/42
CONFIDENTIAL
1.Product Information
⚫Product specification comparison between
LEC2-300 and LEC-330
LEC-330 LEC2-300
Print head
UV lamp
All lamp lighting only
(No partial lighting)
Lighting by
segment
Ink type
EUV2/EUV3/EUV4/EUVS
EUV4
H
ead height
2 levels (Low/High)
3 levels (SpLow/Low/High)
Ink configuration
CMYKGlWh
CMYKWhWh
CMYKGlGl
CMYK
CMYKGlWh
D
ischarged fluid
Controlled by software
Controlled by p
hysical sensor
Multiple crop marks
ー
Supported
Nozzle mask
ー
Supported
Media take
-up unit
Standard
feature
TU4 (Optional item)
Software
Roland VersaWorks
Roland VersaWorks Dual
VersaWorks
VersaWorks
Roland Status Monitor
Service application
Peck
Peck2
New

8/42
CONFIDENTIAL
2.Printing Theory
⚫Print head
New print head
❖Features
-Appearance or basic feature such as nozzle pitch is the same as the print head
of VS-i series
-Inner parts have been changed for UV
-How to distinguish LEC2-300 print head: “UV” is printed on head rank label.
❖Head rank
-8 digits x 3 digits (same as VS-i series print head)
❖Damper
-1000013784 DAMPER,INK IHP XR-640
Not compatible with the VS-i series print head
(If VS-i series print head is attached mistakenly and head rank is input, an error occurs.)

9/42
CONFIDENTIAL
⚫UV lamp
New UV lamp
❖High output
❖Two UV lamps (left/right)
Segment 1 Segment 2 Segment 3
Clean the glass surface using anhydrous ethanol or
isopropyl alcohol.
If dirt cannot be removed, use the following scraper to
scrape off the dirt.
1000021760 SCRAPER,UV LAMP GLASS LEF2-200
Each UV lamp has 3 segments, and each
segment can be turned ON/OFF independently.
Lamp part
2.Printing Theory