Rompa 18820 User manual

Copyright ROMPA® Ltd
PERCEPTION PANELS 18820-2, KH 2.07
PERCEPTION PANELS
VISUAL 18820
TACTILE 18821
AUDIBLE 18822
QUALITY SAVER PACK 18986
CONTENTS
One Perception Panel is included in each of 18820, 18821 and 18822.
The Perception Panels Quality Saver Pack includes all three.
See image below:
ASSEMBLY
1. Open the side part of the frame (the frame is screwed on one side to the display board)
by unscrewing the two screws.
2. Screw the frame to the wall. The screw holes in the display board are all pre-drilled. Use
fixings that are appropriate to the construction of your wall e.g. screws and screw cups.

Copyright ROMPA® Ltd
PERCEPTION PANELS 18820-2, KH 2.07
Check that your wall and the fixings are capable of holding the weight of a Perception
Panel: approximately 7kg each.
3. Slide the three activity elements into the frame in your desired order.
4. Screw the side part back to the frame.
Check that the panel is suitably attached to the wall before allowing it to be played with.
CARE & MAINTENANCE
Wipe clean using a clean, very slightly damp cloth.
Periodically check the condition of the Panel and that it is still securely attached to the wall.
SAFETY
Always supervise the use of this product.
For three years and over.
SPECIFICATION
Size: 91 x 30cm
Birch ply and aluminium frame
Product conforms to EN71