Rosslare AY-V64B Assembly instructions

AY-V64B
Multi-Reader
Installation and Programming Manual

Copyright © 2014 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to ROSSLARE
ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’
(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to
use the information.
No part of this manual may be re-produced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the express written
permission of ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or
other intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN
THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS
AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND
TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION
MAY RESULT IN LEGAL PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any third
party any license to these patents, trademarks, copyrights or other intellectual
property rights, except as expressly provided in any written agreement of
ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time,
without being obliged to announce such revisions or changes beforehand or
after the fact.

Table of Contents
AY-V64B Installation and Programming Manual iii
Table of Contents
1. Introduction ................................................................7
1.1 Box Content ........................................................................... 7
1.2 Ancillary Equipment ................................................................ 7
2. Technical Specifications ..............................................8
3. Installation ..................................................................9
3.1 The Installation Kit .................................................................. 9
3.2 Installing the AY-V64B ............................................................ 9
4. Wiring Instructions ...................................................11
5. Operation Instructions..............................................12
5.1 Transmit Mode ..................................................................... 12
5.2 Programming the AY-V64B.................................................... 12
5.3 Entering Programming Mode................................................. 13
5.4 Exiting Programming Mode ................................................... 14
5.5 Selecting Keypad Transmission Format ................................... 14
5.5.1 Keypad Transmission Format Option Number ...............................15
5.6 Selecting Proximity Card Transmission Format......................... 20
5.6.1 Proximity Card Transmission Format Option Number ....................20
5.7 Changing the Programming Code.......................................... 21
5.8 Changing the Facility Code.................................................... 22
5.9 Return to Factory Default Settings.......................................... 22
5.10 Replacing a lost Programming Code....................................... 23
A. Limited Warranty ......................................................24

List of Figures
iv AY-V64B Installation and Programming Manual
List of Figures
Figure 1: Removing the Top Cover ....................................................................9

List of Tables
AY-V64B Installation and Programming Manual v
List of Tables
Table 1: Wiring Colors .....................................................................................11
Table 2: Programming Menus..........................................................................13
Table 3: Keypad Transmission Format..............................................................15

Notice and Disclaimer
vi AY-V64B Installation and Programming Manual
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or software
described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.
The system must not be used for purposes other than those for which it
was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.
ROSSLARE exclusive warranty and liability is limited to the warranty and
liability statement provided in an appendix at the end of this document.
This manual describes the maximum configuration of the system with the
maximum number of functions, including future options. Therefore, not all
functions described in this manual may be available in the specific system
and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the purpose
of illustration and reference only.
All data contained herein subject to change without prior notice.
In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss of
profits or revenue, cost of capital or loss of use of any property or capital or
injury).
All graphics in this manual are for reference only, some deviation between
the image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).

Introduction
AY-V64B Installation and Programming Manual 7
1. Introduction
The AY-V64B is a programmable Wiegand and Clock & Data
proximity card and keypad reader, which supports multiple proximity
card and keypad formats to provide a high level of compatibility and
connectivity with host controllers.
The unit is programmable for proximity card data in 26-Bit Wiegand,
Clock & Data, or Wiegand Card + PIN format.
The keypad can also be programmed to output eight different data
formats.
The AY-V64B utilizes flash firmware for easy upgrades.
1.1 Box Content
Before beginning, verify that all of the following is in the box. If
anything is missing, please report the discrepancy to your nearest
Rosslare office.
The AY-V64B package contains the following items:
One AY-V64B access control unit
Installation kit
Installation and operating manual
1.2 Ancillary Equipment
The additional non-supplied equipment is required:
Compatible host controller
Power supply – 5 to 16 VDC (from a regulated power supply)
Other Rosslare accessories can be found at Rosslare's website:
http://www.rosslaresecurity.com

Technical Specifications
8 AY-V64B Installation and Programming Manual
2. Technical Specifications
Electrical Characteristics
Power Supply Type Linear type (recommended)
Operating Voltage Range 5–16 VDC
Absolute Maximum
(non-operating)
18 VDC
Input Current Standby: 150 mA
Read: 180 mA
Tamper Output Open collector, active low, max. sink current
30 mA
Maximum Cable Distance to
Controller
150 m (500 ft)
Card Read Distance* 22 cm (9 in.)
Environmental Characteristics
Operating Temp. Range -20°C to 63°C (-4°F to 145°F)
Operating Humidity Range 0 to 95% (non-condensing)
Suitable for outdoor use (meets IP54)
Dimensions
Height x Width x Depth 125 x 125 x 21 mm (4.9 x 4.9 x 0.8 in.)
Weight 285 g (10.1 oz)
* Measured using a Rosslare proximity card or equivalent. Range also depends
on electrical environment and proximity to metal.

Installation
AY-V64B Installation and Programming Manual 9
3. Installation
Installation of an RFID reader adjacent to metallic surfaces
might alter the reader’s specifications. To diminish this
interference, use a plastic spacer when mounting the reader.
3.1 The Installation Kit
The Installation kit comprises of the following items that are to be
used during the installation procedure:
One installation template
Two pan head screws and wall plugs
One L-shaped security screw tool
Two security screws
3.2 Installing the AY-V64B
When installing the reader, you must remove the snap-off cover to
access the screw holes (Figure 1).
Figure 1: Removing the Top Cover

Installation
10 AY-V64B Installation and Programming Manual
The reader must be mounted with the appropriate screws, as
described in the template provided.
To install the reader:
1. Determine an approximate location for the installation of the
reader.
2. Peel off the back of the self-adhesive installation label template
and locate it at the required location.
3. Using the template as a guide, drill two holes (the size of which
are indicated in the template) to install the reader onto the
surface.
4. Drill a 10-mm (7/16”) hole for the cable. In the event that you are
installing the reader on metal, place a grommet or electrical tape
around the edge of the hole.
5. Route the interface cable from the reader to the controller. A
linear type power supply is recommended.
The reader can also be mounted using strong epoxy glue. After
application, the reader should be firmly held in place until the
glue dries.

Wiring Instructions
AY-V64B Installation and Programming Manual 11
4. Wiring Instructions
The AY-V64B is supplied with a 46-cm (18”) pigtail, comprising a 6-
conductor cable.
To connect the reader to the controller:
1. Prepare the reader cable by cutting the cable jacket back 3.2 cm
(1¼”) and stripping the wire 1.3 cm (½”).
2. Prepare the controller cable by cutting the cable jacket back 3.2
cm (1¼”) and stripping the wire 1.3 cm (½”).
3. Splice the reader’s pigtail wires to the corresponding controller
wires and cover each joint with insulating tape.
If the tamper output is being utilized, connect the purple wire to
the correct input on the controller.
Table 1: Wiring Colors
Reader Color Function
5~16 VDC Red DC Input
Shield / Ground Black Ground
Data 1 White Data 1
Data 0 Green Data 0
LEDCTL Brown LED Control
Tamper Purple Tamper
4. Trim and cover all unused conductors.
•The individual wires from the Reader are color-coded according the
Wiegand standard.
•When using a separate power supply for the Reader, this supply
and that of the Controller must have a common ground.
•The Reader’s cable shield wire should preferably be attached to an
earth ground, or a signal ground connection at the panel, or power
supply end of the cable. This configuration is best for shielding the
Reader cable from external interference.

Operation Instructions
12 AY-V64B Installation and Programming Manual
5. Operation Instructions
5.1 Transmit Mode
When the AY-V64B is in Transmit mode, it is ready to receive data
from a presented proximity card or an entered PIN code.
When the reader is in Transmit mode, the
Transmit LED is red and the Program LED is off
When a proximity card or keyboard entry is being transmitted, the
Transmit LED flashes green.
Keyboard data can be sent via one of eight different keypad
transmission formats (see Section 5.5).
Proximity cards presented to the reader are always sent in 26-Bit
Wiegand, Clock & Data, or Card + PIN Wiegand format (see Section
5.6).
5.2 Programming the AY-V64B
Programming the AY-V64B is done solely via the unit's keypad driven
programming menu system. To reach the programming menu system,
the reader must first be placed into Programming mode (see Section
5.3).
During the AY-V64B's manufacturing process, certain codes and
settings are pre-programmed. These settings are the called the default
factory settings.
Table 2 shows the names of all the AY-V64B menus.
Default factory settings are marked by an * sign.
Transmit
Program
Red

Operation Instructions
AY-V64B Installation and Programming Manual 13
Table 2: Programming Menus
Menu Description Menu
Number
Selecting Keypad Transmission Format
Single Key, Wiegand 6-Bit (Rosslare Format)
Single Key, Wiegand 6-Bit with Nibble + Parity Bits
Single Key, 8-Bit Wiegand, Nibbles Complemented
4 Keys Binary + Facility code, Wiegand 26-Bit
1 to 5 Keys + Facility code, Wiegand 26-Bit
6 Keys BCD and Parity Bits, Wiegand 26-Bit
Single Key, 3x4 Matrix Keypad
1 to 8 Keys BCD, Clock & Data Single Key
1
*
Selecting Proximity Card Transmission Format
Wiegand 26-Bit
Clock & Data
Wiegand Card + PIN
2
*
Changing the Programming Code 3
Changing the Facility Code 4
Return to Factory Default Settings 0
5.3 Entering Programming Mode
To enter Programming mode:
1. Press the #key 4 times.
The Transmit LED turns off and the
Program LED turns red.
2. Enter your 4-digit Programming code.
If the Programming code is valid, the
Program LED turns green and the AY-
V64B enters Programming mode.
Transmit
Program
Red
Transmit
Program
Green

Operation Instructions
14 AY-V64B Installation and Programming Manual
•The factory default Programming code is 1234.
•If a Programming code is not entered within 30 seconds, the AY-
V64B returns to Transmit mode.
5.4 Exiting Programming Mode
To exit the Programming mode at any time:
1. Press the #key.
You hear a beep.
The Program LED turns off and the
Transmit LED turns red.
This indicates that the AY-V64B has returned to Transmit mode.
Wrong entries may reset the reader back to Transmit mode.
While in Programming mode, if no key is pressed for 30 seconds,
the AY-V64B exits Programming mode and returns to Transmit
mode.
5.5 Selecting Keypad Transmission Format
The AY-V64B has eight different keypad transmission selectable
formats.
To select a keypad transmission format:
1. Enter Programming mode.
Press "1" to enter Menu 1.
2. The Transmit LED turns red.
Enter the appropriate option number
for the keypad transmission format that
you wish to select (see Section 5.5.1).
Three beeps are emitted on success.
Transmit
Program
Red
Transmit
Program
Green
Transmit
Program
Red
Green

Operation Instructions
AY-V64B Installation and Programming Manual 15
The system returns to Transmit mode.
The Program LED turns off and the
Transmit LED turns red.
If an incorrect option number is entered, a long beep is sounded.
The reader returns
to Transmit mode and the keypad transmission
format remains unchanged.
•Only one keypad transmission format can be active at any one time
•When using the keypad transmission format “1 to 8 keys BCD,
Clock & Data" (Option 8), an additional input is required to specify
the number of keys in the PIN code.
5.5.1 19BKeypad Transmission Format Option Number
See Table 3 to determine the option number for the keypad
transmission format you wish to select.
Table 3: Keypad Transmission Format
Keypad Transmission Format Option
Number
Single Key, Wiegand 6-Bit (Rosslare Format)
Single Key, Wiegand 6-Bit with Nibble + Parity Bits
Single Key, Wiegand 8-Bit, Nibbles Complemented
4 Keys Binary + Facility code, Wiegand 26-Bit
1 to 5 Keys + Facility code, Wiegand 26-Bit
6 Keys BCD and Parity Bits, Wiegand 26-Bit
Single Key, 3x4 Matrix Keypad
1 to 8 Keys BCD, Clock & Data Single Key
1*
2
3
4
5
6
7
8
* Option 1 is the default factory setting.
More information on each of the different keypad transmission
formats is available below and on the following pages.
5.5.1.1 21BSingle Key, 6-Bit Wiegand (Rosslare Format)
Each key press immediately sends 4 bits with 2 parity bits added; even
parity for the first 3 bits and odd parity for the last 3 bits.
Transmit
Program
Red

Operation Instructions
16 AY-V64B Installation and Programming Manual
0 = 1 1010 0 6 = 1 0110 0
1 = 0 0001 0 7 = 1 0111 1
2 = 0 0010 0 8 = 1 1000 1
3 = 0 0011 1 9 = 1 1001 0
4 = 1 0100 1 * = 1 1011 1 = "B" in Hexadecimal
5 = 1 0101 0 # = 0 1100 1 = "C" in Hexadecimal
5.5.1.2 Single Key, 6-Bit Wiegand, Nibble & Parities
Each key press immediately sends 4 bits with 2 parity bits added; even
parity for the first 3 bits and odd parity for the last 3 bits.
0 = 0 0000 1 6 = 1 0110 0
1 = 0 0001 0 7 = 1 0111 1
2 = 0 0010 0 8 = 1 1000 1
3 = 0 0011 1 9 = 1 1001 0
4 = 1 0100 1 * = 1 1010 0 = "A" in Hexadecimal
5 = 1 0101 0 # = 1 1011 1 = "B" in Hexadecimal
5.5.1.3 Single Key, 8-Bit Wiegand, Nibbles Complemented
This option inverts the most significant bits in the message leaving the
least 4 significant bits as Binary Coded Decimal (BCD) representation
of the key. The host system receives an 8-bit message.
0 = 11110000 6 = 10010110
1 = 11100001 7 = 10000111
2 = 11010010 8 = 01111000
3 = 11000011 9 = 01101001
4 = 10110100 *= 01011010 = "A" in Hexadecimal
5 = 10100101 # = 01001011 = "B" in Hexadecimal
5.5.1.4 4 Keys Binary + Facility Code, 26-Bit Wiegand
This option buffers 4 keys and outputs keypad data with a three-digit
facility code like a standard 26-Bit card output.
The facility code is set in Programming Menu number four and can be
in the range 000 to 255. The factory default setting for the Facility
code is 000 (see Section 5.8).
The keypad PIN code must be 4 digits long and can range between
0000 and 9999. On the fourth key press of the 4-digit PIN code, the

Operation Instructions
AY-V64B Installation and Programming Manual 17
data is sent across the Wiegand Data lines as binary data in the same
format as a 26-Bit card.
If the "*" key or the "#" key are pressed during PIN code entry, the
keypad clears the PIN code entry buffer, generates a beep and is
ready to receive a new 4-digit keypad PIN code.
If the entry of the 4-digit keypad PIN code is disrupted and no number
key is pressed within 5 seconds, the keypad clears the PIN code entry
buffer, generates a beep and is ready to receive a new 4-digit keypad
PIN code.
(EP) FFFF FFFF AAAA AAAA AAAA AAAA (OP)
Where: EP = Even parity for first 12 bits.
OP = Odd parity for last 12 bits
F = 8-Bit Facility Code
A = 24-Bit code generated from keyboard
5.5.1.5 1 to 5 Keys + Facility Code, 26-Bit Wiegand
This option buffers up to 5 keys and outputs keypad data with a
facility code like a 26-Bit card output.
The facility code is set in Programming Menu number four and can be
in the range 000 to 255. The factory default setting for the facility
code is 000 (see Section 5.8).
The keypad PIN code can be one to five digits long and can range
between 0 and 65,535. When entering a keypad PIN code that is less
than 5 digits long, the "#" key must be pressed to signify the end of
PIN code entry. For keypad PIN codes that are 5 digits long, on the
fifth key press of the 5-digit PIN code, the data is sent across the
Wiegand Data lines as binary data in the same format as a 26- Bit
Card.
If the "*" key is pressed during PIN code entry or a PIN code greater
than 65,535 is entered, the keypad clears the PIN code entry buffer,
generates a beep and is ready to receive a new 4-digit keypad PIN
code.
If the entry of the 1 to 5 digit keypad PIN code is disrupted and no
number key or " " key is pressed within 5 seconds, the keypad will

Operation Instructions
18 AY-V64B Installation and Programming Manual
clear the PIN code entry buffer, generate a medium length beep and
is ready to receive a new 1 to 5-digit keypad PIN code.
(EP) FFFF FFFF AAAA AAAA AAAA AAAA (OP)
Where: EP = Even parity for first 12 bits
OP = Odd parity for last 12 bits
F = 8-Bit Facility Code
A = 24-Bit code generated from keyboard
5.5.1.6 6 Keys BCD and parity bits, 26-Bit Wiegand
Sends buffer of 6 keys, adds parity and sends a 26-Bit BCD message.
Each key is a four bit equivalent of the decimal number.
The keypad PIN code must be 6 key presses long. On the sixth key
press of the 6-digit PIN code, the data is sent across the Wiegand
Data lines as a BCD message.
If the entry of the 6-digit keypad PIN code is disrupted and no number
key is pressed within 5 seconds, the keypad clears the PIN code entry
buffer, generates a medium length beep and is ready to receive a new
6-digit keypad PIN code.
(EP) AAAA BBBB CCCC DDDD EEEE FFFF (OP)
Where:
A = First key entered D = Fourth key entered
B = Second key entered E = Fifth key entered
C = Third key entered F = Sixth key entered
5.5.1.7 Single Key, 3x4 Matrix Keypad (MD-P64)
This unique mode is intended to let the host controller scan the AY-
V64B keypad while still keeping the proximity card readers 26-Bit
Wiegand or Clock & Data formats active.
An optional interface board must be used between the AY-V64B and
the host system. Each key press is immediately sent on DATA0 as an
ASCII character at a baud rate of 9600 bits per second.

Operation Instructions
AY-V64B Installation and Programming Manual 19
When a key is pressed, DATA1 is pulled "low" until the key is
released at which point DATA1 is set to "high". This allows the
controller to detect the duration of the key press.
The MD-P64 interface unit outputs the data received to 7 outputs
emulating a keyboard. The interface unit does not affect any data
that it receives from the proximity reader whether it is 26-Bit Wiegand
or Clock & Data.
Key pressed = ASCII Value
0 = '0' (0x30 hex) 6 = '6' (0x36 hex)
1 = '1' (0x31 hex) 7 = '7' (0x37 hex)
2 = '2' (0x32 hex) 8 = '8' (0x38 hex)
3 = '3' (0x33 hex) 9 = '9' (0x39 hex)
4 = '4' (0x34 hex) *= '* ' (0x2A hex)
5 = '5' (0x35 hex) # = '#' (0x23 hex)
5.5.1.8 1 to 8 Keys BCD, Clock & Data
Buffers up to 8 keys and outputs keypad data without a facility code
like standard Clock and Data card output.
The keypad PIN code can be one to eight digits long. The PIN code
length is selected while programming the reader for Option 8. The
reader transmits the data when it receives the last key press of the PIN
code. The data is sent across the two data output lines as binary data
in Clock & Data format.
If the "* " key or the "#” key is pressed during PIN code entry, the
keypad clears the PIN code entry buffer, generates a beep, and is
ready to receive a new keypad PIN code.
If the entry of the digit keypad PIN code is disrupted and no number
key or "#" key is pressed within 5 seconds, the keypad clears the PIN
code entry buffer, generates a medium length beep and is ready to
receive a new keypad PIN code.

Operation Instructions
20 AY-V64B Installation and Programming Manual
5.6 Selecting Proximity Card Transmission
Format
The AY-V64B has two different selectable proximity card transmission
formats. Follow the steps below to select the appropriate proximity
card reader transmission format that you wish to use.
To select the proximity card transmission format:
1. Enter Programming mode.
2. Press "2" to enter Menu 2.
The Transmit LED turns red.
3. Enter the appropriate option number
for the proximity card transmission
format that you wish to select (see
Section 5.6.1).
Three beeps are emitted on success.
The system returns to Transmit mode.
The Program LED turns off and the
Transmit LED turns red.
If an incorrect option number is entered, the reader returns to
Transmit mode and the keypad transmission format remains
unchanged.
5.6.1 20BProximity Card Transmission Format Option
Number
26-Bit Wiegand
Wiegand 26 bit transmission format select option "1"
Clock & Data
Clock & Data transmission format select option "2"
Wiegand Card + PIN
Transmit
Program
Green
Transmit
Program
Red
Green
Transmit
Program
Red