Royalcraft CANNES CAN08T-BLACK User manual

CANNES 8 Seater Cube Table
Item Code: CAN08T-BLACK, CAN08T-BROWN, CAN08T-GREY
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 1 / 6
www.royalcraft.co.uk
Assembly Instructions
Product size: L110*W110*H72 cm
The frame of this product is manufactured from mild steel coated with a weather resistant paint.
Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your
furniture for many years to come, we recommend that you check the product from time to time for
signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form,
you should clean the affected area and apply a suitable “thinners based” touch-up paint. Such
paints are readily available from all good hardware and DIY stores.
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

CANNES 8 Seater Cube Table
Item Code: CAN08T-BLACK, CAN08T-BROWN, CAN08T-GREY
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 2 / 6
www.royalcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure tofollow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the table is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts and tightened and inspect regularly. In
the event of problems or missing parts, please contact the seller.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, drycloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary; do not use
washing powders or any other substances containing abrasives
since these substances scratch glass.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this table as a ladder as this could lead tothe
table becoming unbalanced and overturning.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the glass as a chopping surface. Do not strike glass
with hard or pointed items.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
20 Minutes
Tools required
Tips:
It is best not to fully tighten the nuts and
bolts until they are all correctly located.
Only carefully tighten them when you are
satisfied with the alignment of all
components.
Be careful not to overtighten.

CANNES 8 Seater Cube Table
Item Code: CAN08T-BLACK, CAN08T-BROWN, CAN08T-GREY
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 6
www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top Frame
2 PCS B
Table Leg
4 PCS
C
Glass Top
2 PCS D
Connecting Panel
1 PC
E
L-Shape Connecting Bar
8 PCS N15
M6*15mm Bolt
40
PCS
N45
M6*45mm Bolt
4 PCS F2
Nut
4 PCS

CANNES 8 Seater Cube Table
Item Code: CAN08T-BLACK, CAN08T-BROWN, CAN08T-GREY
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 6
www.royalcraft.co.uk
F3
Washer
48
PCS
S1
Spanner
1 PC
AK
Allen Key
1 PC
Step by step assembly instructions
Step One
With the help of another person, attach the Connecting Panel (D) to the Table Legs (B)
using Washers (F3) and Bolts (N15).
At this stage, please do not tighten all Bolts, just let it can be rotated freely.
N15
F3
D
AK B
B

CANNES 8 Seater Cube Table
Item Code: CAN08T-BLACK, CAN08T-BROWN, CAN08T-GREY
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 5 / 6
www.royalcraft.co.uk
Step Two
With the help of another person, combine the Table Top Frames (A) using Washers (F3) ,
Bolts (N45) and Nuts (F2).
At this stage, please do not fully tighten all Bolts and Nuts.
Step Three
With the help of another person, attach the Tale Top Frames (A) to the Table Legs (B) using
L-Shape Connecting Bar (E), Washers (F3) and Bolts (N15).
Once you are satisfied with the alignment of all components, carefully tighten all Bolts and Nuts
using Allen Key (AK) and Spanner (S1).
AF3
AK
N45
F2
S1
E
B
A
F3
AK
N15

CANNES 8 Seater Cube Table
Item Code: CAN08T-BLACK, CAN08T-BROWN, CAN08T-GREY
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 6 / 6
www.royalcraft.co.uk
Step Four
With the help of another person, carefully lift Glass Top (C) and place it onto the Table Top
Frame (A).
Make sure the glass top rest evenly and securely within the table frame.
Level the table by adjustable feet screw.
Your table is now ready for use.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Adjustable Foot Screw
C