Royalcraft Kingston 6 Seat Set with Lazy Susan-Table User manual

Kingston 6 Seat Set with
Lazy Susan-Table
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 1 / 6
www.ro
y
alcraft.co.uk
Assembly Instructions
Product size:
D150.5*H73.5 cm
All diagrams are for assembly reference only.
This product is for Domestic use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Kingston 6 Seat Set with
Lazy Susan-Table
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  2 / 6
 
www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Removing all packaging and banding and place the components
carefully on suitable surfaces to prevent damaging or scratching
them.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all year outdoor use.
However to prolong its life we recommend that during severely
bad weather and during the winter months, it is stored in a cool,
dry place.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
sponge and warm soapy water and wipe with a clean, dry cloth.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners
or any other substances containing abrasives since these substances
can damage the product.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on this product.
Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
30 Minutes
Tools required

Tips:
Do NOT fully tighten bolts/nuts
before all components are
connected. Only fully tighten once
you are satisfied with the
alignment of all components.
Do not over-tighten the bolts.


Kingston 6 Seat Set with
Lazy Susan-Table
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  3 / 6
 
www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top
1 PC B
Table Leg
4 PCS
C
Connecting Panel
4 PCS D
Bolt 4 PCS
F3
Flat Washer
12 PCS F4
Spring Washer
12 PCS
G 
Nut
12 PCS F2
Bolt/Nut Cap
12 PCS
S1
Spanner
1 PC



Step by step assembly instructions
All Bolt Head/Nut Caps should not be attached before finally tightening all Bolts/Nuts with Spanner.

Kingston 6 Seat Set with
Lazy Susan-Table
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 6
www.ro
y
alcraft.co.uk
Step One
With the help of another person,
open the packaging and place the
Table Top (A) upside down on a flat,
non-abrasive surface to
avoid scratching the table surface or rim.
Step Two
Screw the Bolts (D) into the
holes, tighten them using
Screw Driver (not provided).
A
D

Kingston 6 Seat Set with
Lazy Susan-Table
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 5 / 6
www.ro
y
alcraft.co.uk
Step Three
Loosely attach the Table Legs (B) to
the Table Top (A) using
Nut Caps (F2), Nuts (G),
Spring Washers (F4) and
Flat Washers (F3).
Step Four
Loosely attach the
Connecting Panels (C)
to the Legs (B) using
Nut Caps (F2), Nuts (G),
Spring Washers (F4) and
Flat Washers (F3).
F2
G
F4
F3
A
B
A
C
B
F2
G
F4
F3

Kingston 6 Seat Set with
Lazy Susan-Table
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 6 / 6
www.ro
y
alcraft.co.uk
Step Five
Once you are satisfied with the alignment of the components carefully tighten all Bolts/Nuts
using Spanner (S1).
Do not over-tighten.
Cover each Bolt/Nut with Cap (F2).
With the help of another person, carefully turn the table in the upright position.
Level the table by adjustable feet screws.
Your table is now ready for use.
Note: Always use a suitable base weight when using a parasol with this table.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Adjustable Foot Screw