Royalcraft Sorrento Position Chair User manual

Sorrento Position Chair
Assembly Instructions
Product size:
W61.5*D66*H114cm
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 1 / 4
www.a-mir.co.uk

Sorrento Position Chair
Assembly Instructions
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE
REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for Domestic Use only.
Ensure the product is always placed on the firm and level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all parts listed.
Check all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary; do not use
washing powders or any other substances containing abrasives
since these substances scratch glass.
Don’ts
Never tilt the chair during use.
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the arms of this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this product as a ladder as this could lead to the product
becoming unbalanced and overturning.
Do not place very hot or very cold items on this product surface.
Never drag furniture when moving it, always lift it.
Do not use the glass top as a chopping surface. Do not strike glass
with hard or pointed items.
Number of people required for assembly
One person
Time to assemble
No need of assemby
Tools required
No tools required
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 2 / 4
www.a-mir.co.uk

Sorrento Position Chair
Assembly Instructions
Instructions for use of Chairs
Always be careful when you use this kind of articulated product.
Don’t pinch the fingers when folding and unfolding.
Children are not allowed to use this chair without adult’s presence and
guidance!
Unfolding
Lift the chair, unfold the seating panel and backrest as below diagram.
Warning: Please make sure four legs of chair should be fully extended and firmly
placed on the flat ground.
Adjust the two armrests simultaneously to have a suitable backrest angle
for your comfortability.
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 3 / 4
www.a-mir.co.uk

Sorrento Position Chair
Assembly Instructions
Folding
Please fold the chair as below diagram.
Never tilt this product during use.
Ensure this product is always placed firmly
on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 4 / 4
www.a-mir.co.uk