Royalcraft Faro User manual

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 2 / 6
www.royalcraft.co.uk
Before you start
Warnings
Dos
Don’ts
Time to assemble
30 Minutes
Tools required
(Screw Driver, not provided)
Tips:
Do NOT fully tighten bolts or crews
before all components are
connected. Only fully tighten once
you are satisfied with the
alignment of all components.
Do not over-tighten the bolts or
screws.
Faro 5pcs Black Deluxe Cube Set - Table
Assembly Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve this product, please use a protective cover when
your furniture is not in use. This will help prevent harmful UV rays
from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then wipe
with a clean, dry cloth.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since these
substances can damage the product.
Do not place very hot or very cold items on the surface unless
adequately thick table-mats are used to prevent such items from
coming into contact with the product.
Do not use the product as a chopping surface.
Do not strike the product with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damage or worn.
Do not sit or lean on this product.
Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 6
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part
No. Diagram Qty.
A
Table Top
1 PC B
Inner Leg Pole
4 PCS
C
Connecting Bar
1 PC D
Leg Panel
4 PCS
E 3 PCS F
Foot CapFoot Cap
1 PC
G
Connecting Ring
1 PC H
Foot Adjustable Bolt
1 PC
S28
M6*28mm Screw
1 PC S40
M4*40mm Screw
16 PCS
S20
M6*20mm Screw
4 PCS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
www.royalcraft.co.uk
Faro 5pcs Black Deluxe Cube Set - Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 6
www.royalcraft.co.uk
Step by step assembly instructions
Step One
Open the packaging, take out the contents and carefully place the parts on the soft ground
without scratches.
With the help of another person, place the Table Top (A) upside down on a flat, non-abrasive
surface to avoid scratching the table surface or rim.
Attach the Inner Leg Poles (B) to the Table Top (A) using Screws (S20).
Step Two
Attach the Leg Panels (D) to the Connecting Bar (C).
BS20
A
C
D
Faro 5pcs Black Deluxe Cube Set - Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 5 / 6
www.royalcraft.co.uk
Step Three
Attach the Connecting Ring (G) to the above partly-assembled components using Screw
(S28).
G
S28
Step Four
Attach the Leg Panel (D) to the Inner Leg Poles (B) using Screws (S40).
B
DS40
Faro 5pcs Black Deluxe Cube Set - Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 6 / 6
www.royalcraft.co.uk
Step Five
Attach the Foot Caps (E) and Foot Cap (F) to the Leg Panels (D).
Screw the Foot Adjustable Bolt (H) to the Foot Cap (F).
Step Six
With the help of another person, carefully lift the table in the upright position. Level the table
with Foot Adjustable Bolt (H).
During this levelling process you may have to try it for several times.
Your table is now ready for use.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
H
H
D
E
F
Faro 5pcs Black Deluxe Cube Set - Table
Assembly Instructions