Royalcraft MAYFAIR User manual

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 2 / 8
www.royalcraft.co.uk
Before you start
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Remove all packaging and banding and place the components
carefully on suitable surfaces to prevent damaging or scratching
them.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve this product, please use a protective cover when
your furniture is not in use. We would also recommend using a
gazebo or parasol over your furniture during the summer period
and prolonged sunny spells. This will help prevent harmful UV
rays from damaging and discolouring the material.
Any scratches on the paintwork should be touched up
immediately with metal paint to prevent corrosion.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then
wipe with a clean, dry cloth.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Don’ts
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since these
substances can damage the product, including the glass panel.
Never tilt the product during use.
Do not strike the product with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
30 minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fullytighten once you are
satisfied with the alignment of all
components.
Do not overtighten bolts.
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
The product contains small parts which could pose a risk to
young children. Keep small parts out of reach of children.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Cushions should be cleaned following the care instruction on the
label.
If the set is stored outside then we recommend that cushions are
brought inside for storage and protection.

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 3 / 8
www.ro
y
alcraft.co.uk
Member Parts
Part No. Diagram Name Qty.
1 LH SOFA 1 PC
2 RH SOFA 1 PC
3 BENCH 1 PC
LH Sofa
Velcro Band
RH Sofa
Middle Chair
Corner Chair
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions
Velcro Band Assembly
In order to better use the products, the sofa parts are suggested to be
connected by Velcro Band with other parts (in other cartons).

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 4 / 8
www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
LH Sofa Seat
1 PC B
RH Sofa Seat
1 PC
1 PC
C
Sofa Leg
30*30*1.6T*H278mm
8 PCS D
Bench Seat
E
Bench Leg
30*30*1.6T*H320mm
4 PCS S1
Spanner
1 PC
F
Sofa Seat Cushion
4 PCS G
Sofa Backrest Cushion
4 PCS
H
Sofa Side Cushion
2 PCS I
Bench Seat Cushion
1 PC
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 5 / 8
www.ro
y
alcraft.co.uk
F2
Bolt Head Cap
36 PCS W20
M6*20mm Bolt
36
PCS
F3
Flat Washer
36 PCS
Step by step assembly instructions
Part 1: LH Sofa
Step One
Open the packaging,
with the help of another
person, place the LH Sofa Seat (A)
upside down on a flat, non-abrasive surface
to avoid scratching the surface or rim.
Loosely attach the Legs (C) onto
the LH Sofa Seat (A)
using Flat Washers (F3), Bolts (W20) and
Bolt Head Caps (F2).
Only tighten the bolts when all bolts and washers
are in place and turn freely. Once you are satisfied with
the alignment of the components carefully tighten all bolts using Spanner (S1).
Do not over-tighten. Cover each bolt with Bolt Head Cap (F2).
C
AF2
W20
F3
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 6 / 8
www.ro
y
alcraft.co.uk
Step Two
With the help of another person,
stand the Sofa.
Level it by adjustable feet screws.
Place the Sofa Seat Cushion (F),
Sofa Backrest Cushions (G) and
Sofa Side Cushion (H) onto the
Sofa Seat (A).
Your LH Sofa is now ready for use.
Part 2: RH Sofa
Step One
Open the packaging,
with the help of another
person, place the RH Sofa Seat (B)
upside down on a flat, non-abrasive surface
to avoid scratching the surface or rim.
Loosely attach the Legs (C) onto
the RH Sofa Seat (B)
using Flat Washers (F3), Bolts (W20) and
Bolt Head Caps (F2).
Only tighten the bolts when all bolts and washers
are in place and turn freely. Once you are satisfied with
the alignment of the components carefully tighten all bolts using Spanner (S1).
Do not over-tighten. Cover each bolt with Bolt Head Cap (F2).
Adjustable Foot Screw
G G H
F
F
C
B
F2
W20
F3
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 7 / 8
www.ro
y
alcraft.co.uk
Step Two
With the help of another person,
stand the Sofa.
Level it by adjustable feet screws.
Place the Sofa Seat Cushion (F),
Sofa Backrest Cushions (G) and
Sofa Side Cushion (H) onto the
Sofa Seat (B).
Your RH Sofa is now ready for use.
Part 3: Bench
Step One
Open the packaging,
with the help of another
person, place the Bench Seat (D)
upside down on a flat, non-abrasive surface
to avoid scratching the surface or rim.
Loosely attach the Legs (E) onto
the Bench Seat (D)
using Flat Washers (F3), Bolts (W20) and
Bolt Head Caps (F2).
Only tighten the bolts when all bolts and washers
are in place and turn freely. Once you are satisfied with
the alignment of the components carefully tighten all bolts using Spanner (S1).
Do not over-tighten. Cover each bolt with Bolt Head Cap (F2).
Adjustable Foot Screw
G G
H
F
F
E
D
F2
W20
F3
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 8 / 8
www.ro
y
alcraft.co.uk
Step Two
With the help of another person,
stand the Bench.
Level it by adjustable feet screws.
Place the Bench Seat Cushion (I)
onto the Bench Seat (D).
Your Bench is now ready for use.
Never tilt the products during use.
Ensure the product is always placed firmly on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
MAYFAIR - LH & RH SOFA, 1PC BENCH
Assembly Instructions
Adjustable Foot Screw
I