fantastic furniture Tailor User manual

Version 1.0
Tailor
Utility 5 Shelf
fantasticfurniture.com.au

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity :15kg/shelf

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 4
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer; Tape
DO NOT USE
Page 5
fantasticfurniture.com.au
Top/Bottom Panel
(P1)
Top/Bottom Panel
(P1)
Right Side
Panel
(P3)
Left Side
Panel
(P2)
Back Panel
(P6)
Shelf Panel
(P5)
Adjustable
Shelf Panel
(P4)
Adjustable
Shelf Panel
(P4)
Adjustable
Shelf Panel
(P4)
Parts list
2 x Top/Bottom Panels (P1);
Left Side Panel (P2);
Right Side Panel (P3);
3 x Adjustable Shelf Panels (P4);
Shelf Panel (P5);
Back Panel (P6);
1 x Screw
(H7)
1 x Safety
Strap
(H6)
2 x Washer
(H8)
12 x Shelf Supports
(H2)
8 x Cam Bolts
(H3)
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
24 x Nails
(H5)
4 x Cam Nut Screws
(H9)

You will need
Step 1
You will need
Step 2
Page 6
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P2)
(P3)
H3
H3
H3
H3
H3
H3
H3
H3
Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3).
Attach 4 x Cam Nut Screws (H9) into Side Panels (P2, P3).
H9
H9
H9
H9
14
1
14
2
1
2
glide on bottom
8 x Cam Bolts
(H3)
4 xCam Nut
Screws (H9)
Phillips head
screwdriver
(P3)
H4
H4
H4
(P1)
(P1)
Make sure raw edge
is facing up.
H1
H1
H1
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
Phillips head
screwdriver
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Top/Bottom Panels (P1) to Right Side Panel (P3), then tighten the cam nuts.

You will need
Step 3
Phillips Head
Screwdriver
You will need
Step 4
Page 7
fantasticfurniture.com.au
Phillips Head
Screwdriver
H4
H1
H4
H4
H4
H1
H1
H1
(P3)
(P1)
(P1) (P2)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Left Side Panel (P2) into place and tighten the cam nuts.
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
(P5)
(P3)
(P5)
(P2)
Make sure raw edge
is facing up.
This is how a cam lock works........
The head of the cam
nut screw goes into
the open mouth of
the cam lock. You
then turn the cam
lock so it tightens
Adjust the opening of cam locks is facing the cam nut screws,
then push Shelf Panel (P5) into place and tighten the cam locks.

You will need
Step 5
You will need
Step 6
Page 8
fantasticfurniture.com.au
A = B
AB
Ensure the diagonal of section A
is equal to the section B.
Make sure the edge of back panel is well
aligned with side, top and bottom panels
before nailing the back panel.
Attach Back Panel (P6) to the cabinet with 24 x Nails (H5) using hammer.
H5
24 x Nails
(H5) Hammer
Tape
(P4)
(P4)
(P4)
(P3)
(P2)
Align the Shelf Support
to the hole of Adjustable
Shelf Panel.
H2
(P4)
Insert 12 x Shelf Supports (H2) into the holes of Side Panels (P2, P3) as shown.
Insert 3 x Adjustable Shelf Panels (P4) into the cabinet.
12 x Shelf
Supports (H2)
(P6)
(P2)
(P3)

You will need
Step 8
You will need
Step 7
Page 9
fantasticfurniture.com.au
(P1)
H6
H8
H7
(P6)
Phillips head
screwdriver
1 x Safety
Strap (H6)
1 x Screw
(H7)
1 x Washer
(H8)
Use Screw (H7) and Washer (H8) to connect Safety Strap (H6)
on Top Panel (P1) through the gap of Back Panel (P6).
H8
wall
Screw
Phillips head
screwdriver
1 x Washer
(H8)
Move the cabinet to the final position. Attach the safety strap to the wall.
Make sure it is firmly attached and make sure it is a snug fit.
We strongly advise that you use
the wall safety strap provided to
prevent the unit toppling
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.

Page 10
fantasticfurniture.com.au
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.