RST meteolight Q774 User manual

multi-color weather station
meteolight Q774
RST88774
Q774
weather station
barometer.ru
manual EN
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 1

метеостанция RST88774 weather station RST88774
Thank you for purchasing this device, please read the operating instructions
carefully to familarize yourself with the features and modes of operation before
using the product.
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 2

метеостанция RST88774 weather station RST88774
Unpacking and checking
Unpacking and checking
1. Remove the weather station from the packaging, remove all protective films and keep the packaging materials
out of the reach of children.
2. Dispose of the materials separately according to type.
3. Check that all the items that should be included in the delivery are present and whether the weather station dis-
plays any damage.
Items included in the delivery
Items included in the delivery
• Weather station x 1
• Outdoor sensor x 1
• Power adapter for base unit x 1
• Instruction manual x 1
Product functions
Product functions
• Six keys: MODE, ▲, ▼, HISTORY , CHANNEL, SNOOZE
• 7 weather forecast indicator icons: sunny, semi-clear, cloudy, light rain, heavy rain (snow, blizzard).
• RCC receiving system：GMT+3(default）;
• 6-digit time display: hours, minutes, seconds;
• 2000-2099 calendar indication, 11⁄2 digits display month, 2 digits display date;
• Indoor temperature display, resolution 0.1 ° C, detection range -9.9 ° C -50 ° C, detection time 30 seconds;
• Indoor humidity display, resolution 1%, detection range 20%-99%, detection time 30 seconds;
• R outdoor temperature, resolution 0.1 °C, detection range -50 ° C - +70 ° C;
• R Outdoor humidity, resolution 1%, detection range 20%-99%, detection time 30 seconds.
• Barometric pressure display, resolution 0.1HPA, detection range detection range detection range
637.5mmHg~787.5mmHg/850-1050hpa, out of range without restrictions.
• R receives 3 channels of signal
• Double alarm.
• Conformt display
• Inside and outside temperature and humidity trend value indication
• Internal and external low battery indication
• Last 12 hours of air pressure history
• SNZ function,8 minutes delay;
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 3

метеостанция RST88774 weather station RST88774
• reezing point indication (Out temperature range: +1 ° C ~ -3 ° C);
• Blush, blue, green three primary color LED backlights make up 7 colors
• Backlight color has three modes: a, b, c; a mode: manual selection of backlight color, b mode: backlight color
changes with weather pattern, c mode: backlight color changes with outdoor temperature (R temperature).
The default a mode (red light).
• Air pressure unit mmHg and hpa switch display;
• Summertime DST function;、
• Time zone setting (GMT+3), -12/+12 hour setting
• voltage：3.6V-4.8V;
• Low voltage detection3.5-3.7V；
• Quiescent Current：< --uA;
Outdoor sensor:
• requency: 433 MHz
• Transmission range: 50 meters in open area ** .
** Actual distance may be varied depending upon the enviroment, it will be shortened if with interference ,such
as concrete wall etc.
• Batteries: 2 xAAA, LR03, 1.5V
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 4

метеостанция RST88774 weather station RST88774
F sensor
F sensor
1 Current channel
2 Outdoor temperature
3 Outdoor humidity
4 RCC receive
5 Low battery
6 LED indicating lamp
A Transfer temperature/transfer channel selestion button
B lnput/close signal search button RCC output heat sensor
C Output heat sensor
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 5

метеостанция RST88774 weather station RST88774
Installation
Installation
• Open the battery compartment located on the rear side of the devices. Place the batteries in the battery com-
partment. Observe the shown polarity. The batteries are backup batteries.
• Insert 2xAAA, LR03,1.5V batteries into outdoor sensor and observe the red LED light flashing.
• The station is now connecting to the outdoor sensor. This process takes about 3 minutes. Then the display shows
the outdoor temperature and humidity, in case of failure of reception , pls press“SEARCH“for more than 3 seconds
to receive again.
• the automatic receiving of the DC radio signal begins after 3 minutes of outdoor reception.
• This RCC reception process is going on,the flashing symbol “ ”appears in the time display area at the same time.
• Once radio signal receiving is successful, the display shows the symbol “ ” continuously no flashing.
• 5.0V AC adaptor is included.
LCD
LCD and and body body overview overview
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 6

метеостанция RST88774 weather station RST88774
1. weather forecast
2. lighting mode
3. outdoor channel
4. historical record
5. maximum outdoor temperature
6. outdoor temperature trend
7. air pressure data
8. air pressure unit
9. daylight saving time
10. time
11. Monday to riday alarm clock
12. RCC recieve
13. single alarm clock
14. week
15. month
16. date
17. outdoor humidity trend
18. indoor humidity trend
19. indoor humidity
20. outdoor humidity
21. outdoor temperature
22. indoor temperature
23. maximum indoor temperature
24. comfort degree
25. indoor
26. pressure trand chart
27. freezing point
28. holder
29. battery cover
30. battery compartment
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 7

метеостанция RST88774 weather station RST88774
Buttons
Buttons
A. snooze / light; B. mode; C. ▲; D. ▼; E. history; . search; G. DC jack
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 8

метеостанция RST88774 weather station RST88774
Press button Press and hold (3 seconds)
(A) SNOOZE/LIGHT Display backlight Setting the backlight mode A, B or C
(when without power adaptor plugged in)
(B) MODE Time/S-ALARM/W-ALARM switching Setting the time format, time zone shift,
hours, year, date, day of the week,
language , air pressure unit, C/ .
(C) UP ▲Check the MAX/MIN temperature Clear the MAX/MIN temperature
and humidity data and humidity data
(D) DOWN ▼Air pressure unit MMHG/HPA switching Enter the alert setting
(E) HISTO Y View the air pressure history Enter weather graph Settings
(F) SEA CH R channel switching Re-registration the CHANNEL data
Manual set-up
Manual set-up
ATTENTION
SNOOZE/LIGHT button, it is touching button, make sure not to touch it when
do set-up manually for function not relating this button!
• In the standard mode, press the “MODE” button to switch the current time and AL time.
• In the standard mode, press and hold the “MODE” button to enter the time setting mode;
• In the standard mode, press the “CHANNEL” button to switch the R channel :CH1-CH2-CH3-CH1;
• In standard mode, long press the “CHANNEL” button to enter R reception;
• In the standard mode, press “▼” key to press the air pressure unit MMHG/HPA
• In standard mode, long press “▼” to enter ALERT setting mode
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 9

метеостанция RST88774 weather station RST88774
• In standard mode, press “▲” to view the maximum/minimum temperature and humidity.
• In the standard mode, long press “▲” to clear the maximum/minimum value of temperature and humidity;
• Press “HISTORY” button to enter the air pressure history query
• Press “HISTORY” to enter weather graph and altitude setting mode
• Press the “SNOOZE/LIGHT MODE” button when the battery is powered, the LED will light for 14 seconds.
• Long press the “SNOOZE/LIGHT MODE” button 2S to enter the a/b/c selection mode. At this time, press the
“DOWN” button to switch the a, b, c mode, and then press the “MODE” button to confirm the mode.
• When ALARM, press “SNOOZE/LIGHT MODE” button to enter SNOOZE mode, delay 8 minutes and then ring
again;.
Information:
• The clock automatically changes from set-up mode to time display mode if no keys are pressed for 20 seconds.
• Explanation for the time zone display:
You can manually adjust the clock to the time zone of a country (up to 1500km distance to rankfurt/Main)
where the clock receives the DC signal but where the actual time differs from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone display to 01. The clock is
now DC controlled but the time is one hour ahead.
Time setting mode
Time setting mode
• In the standard mode, press and hold the “MODE” button for >2 seconds to enter the time setting mode;
• The set item will flash at 1Hz;
• Setting order：RCC ON/O - DST ON/O - setting GMT - setting Hour - Minute - Year- Month - Day - Language -
pressure value - exit;
• During the setting process, press “MODE” to confirm the setting result and enter the next level setting;
• Setting process, press “▲” button, the setting value is increased by 1, long press >2 seconds, 8 steps/second to in-
crease;
• During the setting process, press “▼” button, the set value will be decremented by 1, long press > 2 seconds,
and 8 steps/second will be decremented;
• When the button is not operated for 20 seconds, the setting mode will be automatically exited, and the set value
will be saved;
• When RCC ON/O is set, the RCC symbol is displayed long, and ON or O is displayed at the time position and
blinks.
• Barometric pressure value setting: press “▲” button or “▼” button to adjust, each step 0.1mmHg or 0.1hpa;
• DST ON/O setting: default DST O , can be manually changed to ON.
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 10

метеостанция RST88774 weather station RST88774
Alarm settings
Alarm settings
• In the standard mode, press the “MODE” button to switch the time display mode to the ALARM time display
mode;
• Switching order：TIME S-ALARM W-ALARM TIME;
• In the ALARM time mode, press the button to switch the corresponding ALARM symbol.
• ALARM is a one-time alarm clock that can be set from Monday to Sunday. The bell symbol and single character
will be turned off immediately after the alarm is completed.
• S-ALARM default time is 8:00, W-ALARM default time is 7:00
• In the ALARM time display mode, press and hold the “MODE” button to enter the corresponding ALARM setting
mode, and the set item will flash at 1Hz.
• Setting order:Hour Minute exit;
• Press “▲”button to Add 1 to the set value, press and hold >2 seconds, then set the value 8 steps / second to in-
crease;
• Press“▼”button,decrease the set value by 1 and press and hold >2 seconds to decrease the set value by 8
steps/second.
• After setting, just press the “MODE” button to confirm;
• When the button is not operated for 20 seconds, the setting mode is automatically exited and the set value will
be saved.
• If two ALARMs arrive at the same time, W-ALARM takes precedence;
• S-ALARM and W-ALARM can enter SNOOZE for eight minutes in the alarm
• When the alarm is ringing, press “SNOOZE·LIGHT” to delay the alarm for 8 minutes and long press the
“SNOOZE·LIGHT” button to stop the alarm. Other buttons have no function.
Temperature alarm setup
Temperature alarm setup
• In the standard mode press and hold the “▼” button for 2 seconds to enter the ALERT setting;
• In the standard mode press and hold the “▼” button for 2 seconds to enter the ALERT setting;
• Setting sequence: ON/O →upper limit→lower limit→exit;
• When setting the upper or lower limit, press the “CHANNEL” button to switch to set different channels;
• upper limit default temperature is +70 ° C, the lower limit is -50 ° C;
• When set, the set item will flash;
• Press “MODE” to confirm the setting result and transfer to the next setting item;
• Press the “▲” button alone to set the value forward; press and hold for more than 2 seconds to advance at 8
steps per second;
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 11

метеостанция RST88774 weather station RST88774
• Press the “DOWN” button to set the value back one step; press and hold for more than 2 seconds, it will retreat at
8 steps per second;
• When there is no valid operation time for more than 20 seconds, it will automatically exit the setting state;
• When entering the setting, ON/O does not select the item when it is O , press “MODE” to exit the setting di-
rectly;
Temperature alert on/off
Temperature alert on/off
• Alert on: Temperature alert symbol shown in display
• Alert off: Temperature alert symbol goes out.
Information
• The set-up process cannot be completed if the maximum temperature selected is lower than the minimum se-
lected temperature.
• The minimum temperature selected must at least be 1°C below the maximum selected temperature.
F eceiving
F eceiving
• Press button for 2 seconds in the standard mode to clear the current display value and re-register the R data.
• Press button for 2 seconds in the standard mode to clear the current display value and re-register the R data.
• The registered CH temperature does not receive the valid signal of the same ID Code within 60 minutes, it will be
open for 3 minutes (do not clear the ID), the reception will fail, the CH temperature will display --._°C-- %, then
every hour long Receive 3 minutes (clear ID);
• Synchronization cycle：CH1:57S,CH2:67S,CH3:79S;
• Priority: When the R long reception meets the alarm, the alarm is given priority, and the R is re-registered after
the alarm is over;
• R In the case of no receipt or drop, the R reception must be automatically received every 30 minutes until it is re-
ceived;
• If channel 1 is received, only the channel 1 digit and temperature are displayed. If no channel is received, the
123 digits are displayed at the same time, and --._°C-- % (not flashing) is displayed;
• Temperature range：-50 --70 °C-；Humidity range：20%-99%;
• R antenna does not need to change when is synchronized;
• R antenna symbol is dynamically incremented for long reception;
• When the transmitter does not successfully receive the RCC, the R is only updated to update the temperature
and humidity;
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 12

метеостанция RST88774 weather station RST88774
• When the receiver is set to RCC O , the R is only updated to update the temperature and humidity;
If the time signal contains DST information, the time is automatically adjusted according to the DST ON/O set-
ting after receiving;
Temperature range (negative sign) shows: when between 0~-9.9 °C, the negative sign is displayed in the first 8 word G
segment;
Information
• The clock automatically changes from set-up mode to time mode if no keys are pressed for 20 seconds.
• The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
Snooze function
Battery Mode:
• Press the key “SNOOZE/LIGHT “ to light the backlight for 14seconds.
Adaptor Mode:
• Only trun the backlight on and off (no backlight - bright - no backlight)
• Adaptor power can be automatically changed by manaully entering 7 colors
12/24 hours mode
12/24 hours mode
The time display can be in 12 （AM/PM）or 24 hours mode, please follow the manual set-up to select
°C/°F temperature display
°C/°F temperature display
The temperature display can be in °C or ° , press “▼“ to select in normal mode
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 13

метеостанция RST88774 weather station RST88774
Max./ Min. for the indoor/outdoor temperature and humidity
Max./ Min. for the indoor/outdoor temperature and humidity
• Press “ ▲“ to display indoor and outdoor max temperature and humidity,
• Press “ ▲“ again to display indoor and outdoor min temperature and humidity
• Hold “ ▲“ for more than 3 seconds to clear up the max./min.
Weather forecast
Weather forecast
reezing point indication (R temperature is +1~-3°C), the freezing point symbol flashes during the temperature range
of +1~-3°C, and the freezing point symbol is less than -3.1 degrees
Remarks:
as the weather is forecasted by air pressure only,
• The display will have discrepancy with the actual weather sometime.
• Currently displayed icon means the forecast for the next 12–24 hours. It may not reflect the current state of the
weather.
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 14

метеостанция RST88774 weather station RST88774
Switching the light on
Switching the light on
7-color backlight selection function
Press and hold SNOOZE/LIGHT MODEto enter A.B.C three backlight mode setting modes, then press ▼to select A.B.C
mode, and press SNOOZE·LIGHT button to select color.
A) Backlight default A mode, (7 colors switched manually) backlight color default ED
B) Five-color weather graphic (mode B )
C) 7-color backlight (mode C
When the base unit is powered through the power adapter and the power mains, the display is constantly illuminated.
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 15

метеостанция RST88774 weather station RST88774
D) Seven-color backlight automatically changes
In any mode ( ire Cat Power), press and hold the “MODE”+ ▼ button to enter 7 colors to change automatically. Each
color displays 7S, automatic cycle. Only manually press the MODE button to confirm the color to exit the automatic
change mode (program Do not set to automatically exit). Backlight color change order:
RedGreenBluelight greenpurplelight bluewhitered...repeat in this way
1) When the “MODE”+ ▼button is pressed in the b mode at the same time, the backlight color of the b mode will not
change with the change of the weather pattern until the “SNOOZE/LIGHT” button is pressed and pressed to enter the
a/b/c switching mode. The backlight color in b mode will change with the weather pattern.
2) When the “MODE”+ ▼button is pressed in the c mode at the same time, the backlight color of the c mode will not
change with the change of the outdoor temperature until the “SNOOZE/LIGHT” button is pressed and pressed to enter
the a/b/c switching mode. The backlight color in c mode will change with the outdoor temperature.
Temperature, humidity and air pressure trends
Temperature, humidity and air pressure trends
• The arrow shows the trends of values of the temperature and humidity measurements on sensor or station.
Indications on the display
Trends Rising Constant alling
empty
Comfort indicator (display for indoors)
Comfort indicator (display for indoors)
It depends on the indoor temperature and humidity and indicates the comfort degree a person would feel
Comfort symbol
Temperature range 0°C ~ 50°C 20°C to 28°C 0°C ~ 50°C
Humidity range < 40% 40% ~ 70% >70%
Degree of environment Dry Comfortable Wet
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 16

метеостанция RST88774 weather station RST88774
Dry: When the indoor humidity is below 40% and temperature is within 0°C to 50°C range, it indicates the indoor envi-
ronment is dry, the symbol will appear.
Comfortable: When the indoor temperature is within 20°C to 28°C range and humidity is within 40% to 70% range, it in
dicates the indoor environment is comfortable, the symbol will appear.
Wet: When the indoor humidity is over 70% and the temperature is within 0°C to 50°C range, it indicates the indoor en
vironment is wet, the symbol will appear.
No indicator: When the indoor temperature is out of 20°C to 28°C but humidity is within 40% to 70%, no symbol will ap-
pear.
Languages of day of week
Languages of day of week
The language options are English (EN), German (GE), rench ( R), Italian (IT), Russian
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 17

метеостанция RST88774 weather station RST88774
Tip
Tip
You can adjust the time manually in case the clock cannot receive the DC radio signal (due to interferences, large
distance to the sender, obstructions like mountains, etc.) As soon as the radio signal can be received, the clock will be
adjusted automatically. Radio signal sender coverage up to 1500 km distance to rankfurt/Main.
T
Technical Data echnical Data
Base unit
Batteries: 3 x AAA / 1.5 V (Not included)
Temperature measuring range: 0°C to +50°C
Resolution: 0.1 °C
Temperature accuracy: 0°C ~ 50°C: +/-1°C, over 40°C: +/-2°C
Humidity measuring range: 20 % to 90 % relative humidity
Humidity measuring accuracy: +/- 5 % with a measuring range of 30% to 80%,
+/- 8% for other measuring range
Resolution: 1 %
In the standard mode, press “▲/MEM” to view the maximum and minimum temperature record, and return to the stan-
dard mode without pressing any key for 20 seconds.
Automatically clear the maximum and minimum temperature and humidity records every day at 0:00 in the morning;
F sensor
Batteries: 2 x AAA / 1.5 V (Not included)
Temperature measuring range: - 50°C to 70°C
Temperature accuracy: 0°C ~ 40°C: +/-1°C, -50°C ~ 0°C and 40°C ~ 70°C: +/-2°C
Transmission frequency: 433 MHz
Range: max. 50 meters (in open area)
Power adapter
Power supply: 230-240V~, 50 Hz 50 mA
Output: 5.0V 150 mA
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 18

многоцветная
цифровая метеостанция
meteolight Q774
RST88774
Q774
weather station
barometer.ru
руководство пользователя RU
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 19

метеостанция RST88774 weather station RST88774
Компания RST благодарна Вам за покупку новой погодной станции RST88770 (Q776),
в которой воплощены, кроме современных высокотехнологичных идей самые последние
достижения компании RST в области дизайна и эргономики. Обтекаемые линии и дина-
мичный силуэт новой модели придают ей неповторимый шик. RST88776 (Q776) предна-
значена для использования дома и на работе, и мы надеемся, что Вы будете ею
довольны. Для того, чтобы полностью использовать все возможности прибора, пожалуй-
ста, внимательно прочтите данную инструкцию и посетите сайт компании.
RST88774-Manual-2020 06.05.2020 11:19 Стр ниц 20