RUKO F11 GIM2 User manual

14+
for age
Quick Start &
Safety Disclaimer
CONTACT US FOR MORE TECH SUPPORT
[phone] Mon-Fri 7:00AM - 7:00PM (PST)

[phone] Mon-Fri 7:00AM - 7:00PM (PST)
CONTACT US FOR MORE TECH SUPPORT
[phone] rukobrandsto[email protected]

v1.0
Safety Disclaimer
Flight Guide 11-24
Must Know Flight Tips 1-10
25-38
Contents

14+
fora ge
Quick Guide &
Safety Disclaimer
CONTACT US FOR MORE TECH SUPPORT
[phone] Mon-Fri7:00AM - 7:00PM (PST)
1. Learning to Fly
There are many steps in the operation of the aircraft, and users need to
learn the parameters, settings, and operating procedures of the aircraft.
Learning channels:
manual
APP operation
animation
quick guide
APP Youtube operation
video
Copyright ©2023 Ruko All Rights Reserved.
1
14+
forage
User Manual
v2.0
CONTACT US FOR MORE TECH SUPPORT
[phone] Mon-Fri7:00AM- 7:00PM(PST)

Copyright ©2023 Ruko All Rights Reserved. 2
2. Flight Environment and Signal interference
Interference:
Any radio signal will be affected by obstacle blocking and magnetic
interference, the user need to choose an open and unobstructed area
without interference.
Steps Consequences Solutions
5G signal interference
(Including remote
controller and image
transmission)
GPS signal
interference
Compass interference
1. The remote controller cannot
control the aircraft.
2. The auto return home function
is triggered 6 seconds after
disconnection.
1. Cannot reach the advertised
image transmission distance.
2. Imaging freezing.
1. Unstable flight.
2. Drift away.
3. Unable to use RTH.
1. Spinning around.
2. Losing control.
3. Unable to use RTH.
1. Wait for the aircraft to return
automatically.
2. Change the flight direction or
environment.
3. The remote controller is pointed
in the direction of the aircraft
during flight.
1. Manually control the aircraft to
a safe area.
2. Stay away from obstacles and
interference.
3. Fly higher than the surrounding
obstacles.
1. Manually land the aircraft.
2. Manually trigger and complete
the Compass Calibration.
3. Stay away from metal objects
with magnetic field interference
sources.

Copyright ©2023 Ruko All Rights Reserved.
3
Please select “Trust” to
allow permissions.
3. Remote Control Connection Settings
Select an appropriate data cable to connect the remote controller
and the mobile phone, when the correct data of the remote
controller is connected to the mobile phone, the setting option
or prompt will pop up.
Mobile phone
system
IOS
Android
Permission page
Please select “Transferring files”
to allow permissions.
If you choose other
options, the image
transmission data of
the aircraft cannot be
transmitted
normally, and the
image of the aircraft
cannot be seen.
Please reconnect the
data cable for correct
settings.

Copyright ©2023 Ruko All Rights Reserved. 4
Some USB Settings of Android phones are hidden in the
“Developer options”, you need to change the "Default USB
configuration" to "Transferring files" after opening the
developer mode.
(The way to open “Developer options” varies depending on the
phone model. You can search Google for details.)
!
(Example phone: Samsung S9)

Copyright ©2023 Ruko All Rights Reserved.
5
4. GPS Signal Searching
GPS signal search depends on the environment.
Indoor
Open and
undisturbed
outdoor area
About 60-90
seconds
Successful search,
good signal.
All functions are
available.
Close to buildings,
doorsteps, woods,
signal tower
About 90 seconds
to 5 minutes
1.The search fails.
2. The signal is
unstable.
1.Unstable flight
2.Drifting
3.Cannot fly in GPS
mode Unable to RTH
Unsearchable
Searching
environment Searching time Searching condition
Corresponding
situation
Cannot fly in GPS
mode, must switch to
indoor flight mode

Copyright ©2023 Ruko All Rights Reserved. 6
5. Pairing & Calibration
Please pairing the remote controller and complete the compass
calibration according to the following operations.
1. Turn on the aircraft.
2. Turn on the remotecontroller.
3. Automatically pairing.
The automatically pairing time
is about 50 seconds.
Calibration is required at each
start.
The aircraft will automatically
enter the calibration procedure
if it encounters a strong
magnetic interference before
takeoff.
1. Successful pairing.
2. Enter the App for compass
calibration.
3. Horizontal rotation
calibration.
4. Vertical rotation calibration.
1. Turn the remote controller
joysticks to 1 and 11 o 'clock.
2. Horizontal rotation calibration.
3. Vertical rotation calibration.
1. Turn the remote controller
joysticks to 11 and 1 o’ clock.
2. Autocomplete calibration.
Placed the aircraft on a level
ground or landing pad.
Operation procedureSteps
Remote Controller Pairing
Compass Calibration
(Default Setting)
Compass Calibration
(Strong magnetic
interference)
Gyroscope Calibration
Cautious

Copyright ©2023 Ruko All Rights Reserved.
7
6. Battery storage & use recommendations
Please store the battery according to the following table:
50%-60%
Cool dry place
Battery bulges may occur if
the battery is fully charged for
a long time.
High temperature (greater than
40 degrees Celsius) and damp
storage can damage batteries.
Battery power
Condition
DetailsStorage recommendations Cautious
Please use the battery according to the following table:
In cold weather (below 0°),
power consumption is fast,
which will shorten the flight
time.
1. DO NOT use high-power
chargers.
2. DO NOT overcharge.
3. DO NOT charging
immediately after flight.
4. The battery has
Auto-Discharging Function,
it automatically discharge to
approximate 85% of the
battery level when it is idle for
2-3days.
Temperature
Charging power
Charging time
0°C-40°C
5V/3A or 5V/2A
About 3.5 hours
DetailsUse Recommendations Cautious

Copyright ©2023 Ruko All Rights Reserved. 8
Since the battery has Auto-Discharging Function, please
remember to charge the battery before each flight.
!
!
DO NOT use batteries under the following conditions:
DO NOT use the batteries when it is obviously abnormal to avoid
power failure, crash, smoke and fire and other safety events.
Damp, water damage Fell, battery impact Extrusion and
deformation Leakage

Copyright ©2023 Ruko All Rights Reserved.
9
The remote control and drone
do not pair successfully, and
the matching time is about 50
seconds
USB permissions are not set
USB cable not inserted or loose
Signal interference causes the
image transmission signals
unstable or interrupted
Automatically complete the
matching before entering the
APP operation interface
Please reinsert the cable
correctly set the USB Settings
option that pops up.
Select "Transferring files" for
Android phones, and "Trust"
for iphones.
Insert the RC cable and ensure
it is securely installed
Choose an open area and pay
attention to flying skills
Imaging freezing.
（during flight)
No transmission image
ConsequencesTypes Solutions
7. App does not show what the drone's camera
is taking

Copyright ©2023 Ruko All Rights Reserved. 10
Be sure to choose an open area without interference.
8. Photography Tips
For your first flight, use Beginner mode and fly in a short distance,
paying attention to the flight height must be higher than the
obstacles.
Turn off Beginner mode and set maximum altitude and distance to
start long-distance flight, please fly the aircraft upwind, so that it
have enough power to trigger the RTH automatically and ensure
that the aircraft safely returns to the home point.
When flying long distances, the remote controller and mobile phone
should be point at the aircraft to maintain the best communication
effect.
An SD card is recommended for storing higher resolution video files.
The following is some skills for taking good photos and videos:
Sunny and well-lighted
Front-lighting
1.Windless weather
2.Hover shooting, steady and
uniform control of the aircraft
clear and realistic,
good color reproduction, high
saturation, clear imaging
Weather
Shooting Angle
Video shooting

Copyright ©2023 Ruko All Rights Reserved.
11
Charger not included
≤15W
Download App
1 Flight Guide
Charge the Batteries
RUKO DRONE App
RUKO DRONE
RUKO DRONE
Download on the
App Store
Download for
Android
STOP
SPEED

Copyright ©2023 Ruko All Rights Reserved. 12
2 Unfold the Drone
1
2
Lift and then pull
1
2
3

Copyright ©2023 Ruko All Rights Reserved.
13
3 Prepare the Remote control
Install
Take out
Back of remote controller
Pull out the holder
Mobile device

Copyright ©2023 Ruko All Rights Reserved. 14
Height≥65ft
4 Select an Open Flight Area

Copyright ©2023 Ruko All Rights Reserved.
15
Note: The drone and transmitter linking takes around 50
seconds.
5 Power on
Press once and long press for 3 seconds
to turn on the remote.
Press and hold the button until the aircraft
plays startup sound.
1
2

Copyright ©2023 Ruko All Rights Reserved. 16
RC Cable (USB-C connector)
RC Cable (Micro USB connector)
RC Cable (Lightning connector)
6 Data Cable Connection and Setup
When entering the APP interface please remember to
ALLOW all pop-up permissions.
SOTP
SPEED

Copyright ©2023 Ruko All Rights Reserved.
17
Rotate the aircraft horizontally 360°.
Calibrate the Compass
( About 1-2 turns )
Rotate the aircraft vertically 360°.
( About 1-2 turns )
7 Calibration
Calibrate the Gyroscope
Push joysticks to 11 & 1 o'clock position.
( About 2 seconds )
A level ground
SOTP
SPEED