Rutland County FINCH User manual

Assembly Instructions
Finch Planter Seat
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
Package contents
Tools required
4 x Long side panels
2 x Short side panels
2 x Short side panels with lug
1 x Seat panel
8 x Finishing slats
20 x M8 Coach screws
16 x 65mm screws
10mm socket drive
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
The Finch Planter Seat

Finch Planter Seat
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Place one of the long side panels adjacent to one of
the short side panels as shown and fix them together
with coach screws, using the predrilled holes at the
top and bottom of the short side panel. Note that the
fixing battens are flush with the TOP of the assembly.
Step 3
Step 4
Add the second short side, this time with lug, again
fixing in place with 2 coach screws.
Now add the final (long) side panel and using four
more coach screws, secure it in place. Repeat Steps 2
- 4 so that you have two planters.

Finch Planter Seat
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
Now add four of the mitred finishing slats to the top
of the planter and arrange them so that they form a
square which is centred on the top of the assembly.
Now secure in place using 8 woodscrews, 2 at each
corner through the slat into the top edge of the
planter. Repeat for second planter.
Now take one of the planters and place it in the final
location for the planter seat...
Step 7
Step 8
...and arrange the second unit approximately the
length of the seat panel away from the first unit, so
that the lugs are parallel and directly facing each
other.
Now lower the seat panel onto the lug as shown at
both ends, adjusting the position of the planters until
the seat panel fully butts up to the side of the
planter...

Finch Planter Seat
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
...before securing in place with 2 coach screws at
each end by working from under the seat panel as
shown.
Your Finch Planter Seat is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk