Rutland County Tinwell Picnic Bench User manual

Assembly Instructions
T
Tinwell picnic bench
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Table top
2 x Seats
2 x Table leg frames 2 x Seats
4 x Seat leg frames
1 x Parasol support 2 x A frames
4 x Seat leg braces
2 x Table leg braces
M8 Coach screws (70mm)
Cover caps
10mm socket or spanner
Tinwell Picnic Bench

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Lay the table top upside down on a clean, flat surface
taking care not to damage it. Now line up one of the
table leg frames centrally on the table top as shown
in step 3.
Step 3
Step 4
Place one of the table leg frames centrally against the
fixing batten ensuring that the gap at the table edge
is the same on both sides. Now, using 2 of the
supplied coach screws and the pre drilled holes,
secure the table leg frame to the fixing batten on the
table top.
Using one of the supplied coach screws and the pre
drilled holes, secure the table leg frame to the fixing
batten on the table top...

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
...and secure the other side in the same fashion.
Repeat steps 2-5 for the other table leg frame.
Now both ends are attached....
Step 7
Step 8
...turn the table right side up.
Place one of the leg braces centrally against table leg
frame as shown and proceed to step 9.

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
Using the pencil lines on the leg brace as a guide, line
up the brace in the correct position and attach it to
the bottom of the table leg frame...
...using a coach screw. Then secure the other end of
the brace in the same manner.
Step 11
Step 12
Now repeat steps 8 - 10 for the other end of the table
until your table is as shown above.
Insert the parasol brace into the gap between the
table legs until each end is resting on the table leg
frame cross brace, as shown above.

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
5
Step 13
Step 14
Ensure the end of the parasol brace is flush with the
end frame.
Then secure in place using 2 coach screws in each end
of the parasol brace .
Step 15
Step 16
Position one of the table leg braces so that it is
positioned as shown and also central across the
parasol brace then hold it in place.
Now look under the table and adjust the position so
that this is also aligned centrally across the table
centre slat.

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
6
Step 17
Step 18
Continue to hold the table leg brace firmly in place
and attach it to both the parasol brace and table top
using coach screws. Repeat the process for the other
angle brace.
Lay one of the seat panels upside down on a flat
surface as shown.
Step 19
Step 20
Align one of the seat leg frames centrally across the
seat panel.
Attach the leg frame using 2 coach screws as shown.
Repeat for the other end of the seat panel then for
the remaining seat panel and leg frames.

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
7
Step 21
Step 22
Place a seat leg brace in position and, as you did for
the table, ensure it is centrally aligned.
Now attach it to the seat panel and seat end frame
using coach screws.
Step 23
Step 24
Attach one of the seat leg braces to the other end of
the seat unit and then repeat steps 21-23 for the
other seat.
Place the completed seat units in position, ready to
be secured to the main table assembly as shown.

Tinwell picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
8
Step 25
Step 26
Ensure that the edge of the seat frame is flush with
the end of the leg brace...
... and fix into place using 2 coach screws. Repeat this
for the remaining 3 seat frame ends.
Step 27
Place the black cover caps supplied over any exposed
screw heads. Your Tinwell bench is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk