Rutland County Tinwell User manual

Assembly Instructions
T
Tinwell picnic table and
bench set
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Table top
2 x Seat panels
2 x Table leg frames 2 x Seats
4 x Seat leg frames 2 x A frames
4 x Seat leg braces
2 x Table leg braces
12 x M8 Coach screws 70mm
20 x M8 Coach screws 60mm
32 x Cover caps
* 8ft version additionally includes - 2 x seat supports and braces, 8 x
60mm Coach screws and 8 x cover caps.
10mm socket or spanner
Tinwell Picnic table and Bench set

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings. Lay the table top upside down on a clean, flat
surface, taking care not to damage it.
Now line up one of the table leg frames centrally on
the table top as shown and secure in place using 2
70mm coach screws through the pre-drilled holes in
the fixing batten.
Step 3
Step 4
Line up one of the Table leg braces centrally on the
table top.
Attach it to the underside of the Table top using a
60mm coach screw as shown...

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
...and secure to the Table end frame by using another
60mm coach screw through the end frame.
Repeat Steps 2 to 5 so that both Table ends are
attached...
Step 7
Step 8
...before turning the table right side up.
Place one of the seat panels upside down on a flat
surface taking care not to damage the finish...

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
...and aligned one of the seat leg frames centrally on
the seat panel as shown, before fixing into place with
2 x 70mm coach screws.
Now place the seat leg brace as shown so that it is
also aligned centrally before fixing into place with a
60mm coach screw through the brace into both the
seat leg frame and the underside of the seat panel.
Step 11
Step 12
Repeat for the other end of seat panel. The 8ft
version has an additional centre support so proceed
to Step 12 if you have this version. Otherwise
proceed to Step 16.
Place one of the seat supports against the middle
batten of the seat panel.

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
5
Step 13
Step 14
Check that it is centrally aligned and fix into place
with 2 x 60mm coach screws.
Now place the support brace centrally aligned as
shown….
Step 15
Step 16
…before fixing into place with a 60mm coach screw
through the brace into both the seat support and the
underside of the seat panel. Repeat steps 12 to 15 for
the remaining seat.
Cover any exposed coach screw heads with the black
cover caps. Your Tinwell picnic table and bench set is
now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk