S.R.Smith LM10 User manual

LM10 POOL LIFT
INSTRUCTION MANUAL

srsmith.com/au - 3
CONTENTS
GENERAL INFORMATION.......................................................................2
INSTALLATION .........................................................................................3
• Installation area................................................................................................. 3
• Water pressure check.................................................................................... 3
• Handling ...............................................................................................................4
• Connection.......................................................................................................... 5
• Testing................................................................................................................... 5
OPERATIONAL GUIDELINES .................................................................6
• Use of the LM10................................................................................................ 6
• Emergency stop............................................................................................... 7
• Maintenance ....................................................................................................... 8
• General instructions........................................................................................9

2 - LM10 INSTRUCTION MANUAL
Product Description:
Importer: SR Smith Australia
12 Enterprise Street, Richlands QLD 4077
www.srsmith.com/au
Dimensions: Height: 1700 mm
Width: 1030 mm
Depth: 1430 mm
Weight: 120 Kg
Power Supply: Hydraulic Drive - Domestic water supply
(with booster pump when required)
Minimum pressure: 3.5 bars
User Controls: Up-down controls on deck upright and
platform handrail
Movement: Manually removable and mobile, collapsible
for storage
Warranty: 2 Years
Weight limit: 160kg
GENERAL INFORMATION

srsmith.com/au - 3
INSTALLATION AREA
The LM10 must be installed more than 2.5m from the edge of the pool.
The lift should be installed in a properly lit area (200 lux min to the ground) and provision of
additional auxiliary lighting if the 200 lux is not reached.
Verify access in the installation area:
- Access free of any obstacles
- Sucient passage for moving and handling of the lift
WATER PRESSURE CHECK
Check that the pressure of the water network is a minimum of 3.5 bars. If minimum pressure is
not achieved, installation of a booster pump with pressure switch is required
INSTALLATION

4 - LM10 INSTRUCTION MANUAL
HANDLING
Two operators are required for removing the LM10 from the pallet.
Once unpacked, roll the LM10 to the installation area (Images 1 and 2). The position of center of
gravity is indicated by the red arrow.
Refer to the installation sheet for the installation of the fixing lugs or anchor boxes. (fixing lugs
shown below)
Set the position of the LM10 as shown in Images 4, 5 and 6.
INSTALLATION

srsmith.com/au - 5
CONNECTION
Connect the water supply to the connection point at the side of the LM10.
(Images 7 and 8)
Gradually open the supply valve. (Image 9)
Ensure the water supply operating pressure is above 3.5 bars.
Check for any leaks in the water supply network.
TESTING
Carry out several ascents and descents using the control buttons. (Images 10 and 11)
Test the emergency stop valve. (Image 12)
Test the water supply valve. (Image 9)
INSTALLATION

6 - LM10 INSTRUCTION MANUAL
STANDING USE
Descent
Before accessing the mobile platform, make sure that the lift is in the up position. If necessary,
push the up button until the platform is in its highest position. Once on the platform, ensure
stability using the railings located on each side of the platform. Before descending, inspect the
area to ensure that no pool users are near or under the lift. To control the descent, press the down
arrow button located on the side of the railing. To stop the mobile platform at the desired level,
simply release the control button.
Ascent
The platform can be accessed within the pool with help of the railings and/or carer. Before
operating the lift, check that no pool users are near the platform area. To control the ascent, press
the arrow button at the top of the button box located on the side of the railing. Once the platform
has reached the high position, the user can exit the pool.
IN POOL WHEELCHAIR USE
Descent
Before accessing the mobile platform, make sure that the lift is in the up position. If necessary,
push the up button until the platform is in its highest position. Once on the platform, ensure
stability using the railings located on each side of the platform. Once the chair is on the movable
platform, ensure brakes are locked in and the side elastic cords on both sides of the armrests are
attached. Before descending, inspect the area to ensure that no pool users are near or under the
lift. To control the descent, press the down arrow button located on the side of the railing. To stop
the mobile platform at the desired level, simply release the control button.
Ascent
The platform can be accessed within the pool with help of the railings and/or carer. Before
operating the lift, check that no pool users are near the platform area. Once the chair is on the
movable platform, ensure brakes are locked in and the side elastic cords on both sides of the
armrests are attached. To control the ascent, press the arrow button at the top of the button box
located on the side of the railing. Once stopped at the high level, detach the elastic cords, release
the brake from the chair and move backwards to exit the platform.
USE OF THE LM10
The LM10 must always be used under the
supervision of an authorised person. The lift can
be operated by the user while standing on the
platform or sitting in a wheelchair dedicated to
this use.
OPERATIONAL GUIDELINES
SR Smith Mobile Aquatic Chair • product code: AC0000

srsmith.com/au - 7
EMERGENCY STOP
The emergency stop is operated by closing the switch of the emergency stop valve located on
the left side of the access plate. (Image 12)
The action on this valve controls the instantaneous stop of any descent or ascent of the mobile
platform.
After an emergency stop:
• The user must evacuate from the lift.
• The water supply must be turned o. (Image 9)
Before returning to service:
• Check the lift status.
• Open the emergency stop valve.
• Open the supply valve.
• Test the correct functioning of the lift.
Cases requiring an emergency stop:
• Any action endangering the user or the accompanying person.
• Any action endangering other pool users.
• Any external operational problems endangering the user, the accompanying
person or pool users.
OPERATIONAL GUIDELINES

8 - LM10 INSTRUCTION MANUAL
OPERATIONAL GUIDELINES
COMPONENTS
PREVENTIVE MAINTENANCE CORRECTIVE MAINTENANCE
Type Frequency Type Frequency
Structure Visual check Yearly - -
Anchors Visual check Yearly - -
Up/down Buttons Visual check + test Yearly Replacement If needed
Emergency Stop Visual check + test Yearly Replacement If needed
Water pressure Visual check Yearly - -
Leaks Visual check Yearly Replacement If needed
MAINTENANCE
General maintenance operations
• Cleaning of the stainless-steel parts: Once a week
(S.R.Smith rejuvenation kit recommended)
• Cleaning of the plastic platform: As required
General inspection points (see table below)
• Inspect the general condition of the LM10.
• Inspect movement controls (access button boxes and mobile tray).
• Inspect that the water pressure is set correctly (3.5 bars minimum)
• Inspect and replace any damaged joins/connections.

srsmith.com/au - 9
GETTING STARTED
Before pressurizing, check that the network pressure does not exceed 5 bars.
Check that the emergency stop valve works properly.
Check the control buttons function correctly (ascent and descent).
Notify an authorised person in the event of abnormal functioning.
USE
Presence of an authorised person monitoring the lift is required during use.
Check that there are no other pool users near the lift.
Do not allow use of the lift as a general entry point into the pool for all users.
Access to the mobile platform is only authorised for one person at a time.
Maximum operating load is 160kg.
DAILY SHUTDOWN AND MAINTENANCE POSITION
Place the lift in the high position and turn o water supply.
WARNINGS
Do not use the lift without permission.
Do not use the lift without supervision.
Do not use the lift for general pool entry (diving or jumping from platform)
Do not exceed the maximum operating load of 160kg.
Do not operate the lift with pool users near or under the platform.
Do not modify or remove the safety switches.
GENERAL INSTRUCTIONS

07.3812.2283 | srsmith.com/au