Safe Fleet Prime Design FBM-1051 User manual

Pages 2-3 Packaging Contents
Pages 4 FBM Mounting
Pages 5-6 Mounting to OTC Channels
Pages 7-8 Installing Mount Braces
OTC Base Mounting System
PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
Toll Free: 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
2
FBM-1051 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CONTENTS OVERVIEW
Base Mounting Leg ............................................... (Qty 4)
Crossbar Mounting Brace..................................... (Qty 2)
Channel Mounting Brace...................................... (Qty 4)
Mounting Leg Connector Assembly ..................... (Qty 4)

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
FBM-1051 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
Anti-Seize
Lock Washer (10X)
Mounting Connector (4X)
M8 x 30MM (4X)M8 x 20MM (6X)
M8 x 60MM Carriage Bolt (2X)
M8 x 65MM (8X)
M8 Lock Nut (2X)
M8 Lock Nut (8X)
" Flat Washer (2X)
" Flat Washer (18X)
Fender Washer
(8X)
Rubber Washer
(8X)
M8 Nut Bracket (10X)
HKT-8061 FBM Hardware Kit
HKT-0188 Crossbar Mounting Connector Hardware Kit
Anti-Seize (included Hardware Kits)

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
107.00”
Front
Rear
Front
Rear
131.00”
52.25”
(may vary per
customer box
specifications)
52.25”
(may vary per
customer box
specifications)
95.00”
52.25”
(may vary per
customer box
specifications)
Front
Rear
FBM-1051 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
INSTALLING MOUNTING LEGS
8’ BODY CONFIGURATIONS
9’ BODY CONFIGURATIONS
11’ BODY CONFIGURATIONS 1Install Mounting Hardware from HKT-8061 as shown..
NOTE: Recommended installation distances are as shown.
NOTE: Recommended installation distances are as shown.
*Ensure clearance for fastening hardware under
the front and rear mounting surfaces of your truck box.
*Ensure clearance for fastening hardware under
the front and rear mounting surfaces of your truck box.
NOTE: Recommended installation distances are as shown.
M8 x 65MM
Flat Washer
Rubber Washer
Fender Washer
Locknut
*Ensure clearance for fastening hardware under
the front and rear mounting surfaces of your truck box.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
2.1 Install Mounting Leg Connectors onto the Base Mounting Legs
as shown.
Remove and
retain Hardware
INSTALLING MOUNTING LEGS 2.2 Re-install Mounting Leg Connector Hardware as shown.
FBM-1051 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
Align outer Connector hole with
the bolt hole on the Mounting Leg
for Hardware installation.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
6
FBM-1051 ASSEMBLY INSTRUCTIONS-MOUNTING TO OTC CHANNELS
OVERVIEW: MOUNTING TO OTC CHANNELS
MOUNTING TO CHANNELS
Torque all Mounting Bracket
bolts to 90 in-lbs
Crossbars must be installed directly
under the the rear and front mounts
3.1 Loosen all indicated Nuts to
install the Channels. Do not
tighten until Step 3.3.
3.3
3.2
NOTE: Channels and Crossbars in this Overview are shown
for reference only. Specic congurations are determined
by Service Body size, and Crossbar preferences.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
7
FBM-1051 ASSEMBLY INSTRUCTIONS-INSTALLING MOUNT BRACES
REAR MOUNTING FOOT
NUT BRACKETS
MID MOUNTING FOOT
NUT BRACKETS
MID CROSSBAR BRACE INSTALLATION
M8 x 60MM
Carriage Bolt
Flat Washer
Finger-tighten
Locknut
4.1
5.1
5.1
5.2
Install one M8 Nut Bracket in each rear
Mounting Foot channel as shown. 4.2 Install two M8 Nut Brackets in each mid
Mounting Foot channel as shown.
Install the mid Crossbar Braces as shown. Do not
torque until Step 5.3.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
USAM-FBM1051-US01 Rev-A 0820
FBM-1051 ASSEMBLY INSTRUCTIONS-INSTALLING MOUNT BRACES
REAR/MID CROSSBAR–CHANNEL
BRACE INSTALLATION
Keep Nut Bracket
loose for installation
into inner Channel sides
M8 x 20MM
Lock Washer
Flat Washer
M8 x 30MM
Lock Washer
Flat Washer
M8 x 20MM
Lock Washer
Flat Washer
5.3
6.2 6.3
Install the mid Crossbar Brace Hardware into the top
Nut Bracket as shown. Torque all Hardware to 90 in-lbs.
Install Braces into the inside of the Channels as shown. Install the lower end of the
Braces into the Mounting Foot
channels using the remaining
Nut Brackets and Hardware as
shown. Torque to
90 in-lbs.
6.1
*Holes must align