Saferhomee HB-2050G User manual

Manual Of Networking Alarm Panel
HB-2050G
HB-4040G
HB-5050G

网络报警主机使用说明
1
1.HB-2050G

网络报警主机使用说明
2
HB-2050G Connections of cables:
SIM Card Slot: Only 2G SIM Card is available(Mini SIM)
Power Interface:DC15V/1.5A
Output Interface：DC12V/0.5A（Linkage other devices--Siren and etc）
Set Button: Restore to the factory default
Technical Parameters:
Working Voltage
DC 15V/1.5A
Wireless Frequency
434.6MHz FSK
GSM Frequency
900/1800/1900/2100 MHz
Dimension
103x110x49（mm）

网络报警主机使用说明
3
2.HB-4040G

网络报警主机使用说明
4
HB-4040G Connections of cables:

网络报警主机使用说明
5
SIM Card Slot: Only 2G SIM Card is available(Mini SIM)
Power Interface:DC15V/1.5A
Output Interface：DC12V/0.5A（Linkage other devices--Siren and etc）
Set Button: Restore to the factory default
Technical Parameters:
Working Voltage
DC 15V/1.5A
Backup Battery
4×3.2V LiFePO4 Battery
Wireless Frequency
434.6MHz FSK
GSM Frequency
900/1800/1900/2100 MHz
Dimension
163x146x16（mm）
3.HB-5050G

网络报警主机使用说明
6
HB-5050G Connections of cables

网络报警主机使用说明
7
HB-5050R Connections of cables
Outputs Jumpers(Disable)：used to control the warning board status
+12: If AC powered,work normally;If DC powered,work abnormally

网络报警主机使用说明
8
OUT: Alarming Mode,the warning board will light; Arm or Disarm
Mode,the warning board will blink;
Warning Board Interface：DC12V/0.5A outputs
Siren Interface：DC12V/0.5A outputs
Power Interface:DC15V/1.5A
SIM Card Slot: Only 2G SIM Card is available(Mini SIM)
Set Button: Restore to the factory default
Technical Parameters:
Working Voltage
DC 15V/1.5A
Backup Battery
12V/1.3Ah
Wireless Frequency
434.6MHz FSK
GSM Frequency
900/1800/1900/2100 MHz
Dimension
165x175x62（mm）
4.Instructions
LCD Display:
-01/01 (01Blinking)
On Setting Mode
-F0
Restored to factory default
-F6
Connected to Server Success
No Display
Static working status,alarm panel has been
connected the detectors or remote controls
-XX (-Blinking)
learning detector status（XX：01…99 zone number）
_XX
Learned detector success（XX：01…99 zone number）
-XX
Alarm（XX：01…99 zone number）
-0X (-Blinking)
learning remotes status（X: 1-4 zone number）
_0X
Learned remotes success（X: 1-4 zone number）
-F5
Emergency Alarm(SOS)
-F7
Connect to server failure

网络报警主机使用说明
9
-F2
Deleted account information success
-F8
SIM card faults
HXX
GPRS Signal less than 13（ＸX: 00-13）
-F1
Tamper
Indicator lights：
Red: Arm Status
White（2050G）/Yellow(4040G)/Green(5050G)：Disarm Status
Delete Account Information：Press the “Setting Button”Once,LCD
Display”-01”(01 Blinking),and then hold the “Setting Button”for
5 seconds ， Release the “setting button”when the LCD
Display”-F2”;
Restore to factory default：Press the “Setting Button”Once,LCD
Display”-01”(01 Blinking),and then hold the “Setting Button”for
10 seconds ， Release the “setting button”when the LCD
Display”-F0”;
5. APP Operation Manuals
5.1 Phone Configuration
Smart Phone
Above Android(4.0) Operating System
≥2G RAM
≥2G Storage Memory
5.2 Phone Setup→
Setting →Permissions →Saferhomee
Write and delete SMS messages →Accept
Read SMS messages →Accept
Change mobile data connectivity →Accept