Salus AHTR5024 User guide

INSTALLER MANUAL
Wired Digital Thermostat
Model: AHTR5024

Contents of the box
Manual Contents:
Box Contents
Introduction
Product Compliance and
Safety Information
Installation
User Interface
Status/LED indication
Installers notes
Warranty
Icons used in this manual:
Safety
Important info
Your benefit
Fixing Screws 1 x Installer Manual
INSTALLER MANUAL
Wired Digital Thermostat
Model: AHTR5024
AHTR5024 Thermostat
2 AHTR5024 Instruction Manual
Product Compliance and Safety Info

Product Compliance and Safety Info
AHTR5024 Instruction Manual 3
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhich
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

4 AHTR5024 Instruction Manual
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
Product Compliance and Safety Info Continued
Product Compliance and Safety Info Continued

AHTR5024 Instruction Manual 5
Safety Information
Use in compliance with safety regulations. The unit is to be used for the control of
room temperature inside the house.
Installation
This accessory must be fitted by a competent person, and installation must comply
with the guidance, standards and regulations applicable to the city, country or state
where the product is installed. Failure to comply with the relevant standards could
lead to prosecution.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
Product Compliance and Safety Info Continued

Product Description
Installing the unit
Thank you for purchasing the SALUS AHTR5024 Thermostat. This thermostat is a
device that lets you customize the heating and cooling of your home as needed.
The AHTR5024 device from SALUS North America is a stylish and accurate digital
room thermostat that is fitted with a large easy to read LCD screen and one touch
buttons. You can now simply adjust your home temperature as desired in order to
create a comfortable home environment.
We hope you enjoy our product.
Install the AHTR5024 digital room thermostat roughly about 1.5m above floor level.
It should be mounted in a location where the thermostat is easily accessible and
away from direct sunlight. You can mount the thermostat directly on the wall or you
can install it on top of a wall-box.
6 AHTR5024 Instruction Manual

1. Mounting the Thermostat
Gently remove front housing.
Without floor sensor With floor sensor
Thank you for purchasing the SALUS AHTR5024 Thermostat. This thermostat is a
device that lets you customize the heating and cooling of your home as needed.
The AHTR5024 device from SALUS North America is a stylish and accurate digital
room thermostat that is fitted with a large easy to read LCD screen and one touch
buttons. You can now simply adjust your home temperature as desired in order to
create a comfortable home environment.
We hope you enjoy our product.
Install the AHTR5024 digital room thermostat roughly about 1.5m above floor level.
It should be mounted in a location where the thermostat is easily accessible and
away from direct sunlight. You can mount the thermostat directly on the wall or you
can install it on top of a wall-box.
AHTR5024 Instruction Manual 7

2. Terminal Connection
N
N
L
CO
L
N
S1 ACTUATOR
OPTIONAL
EXTERNAL
PROBE
E.G.
HEAT
PUMP
OUTPUT
TO MULTIPLE
DEVICES
NSB
OUTPUT
230VAC
50Hz
N
CO
L
N
S1
Note: You can wire the thermostat directly to
the AKL08 wiring centre or to an actuator
(purchased separatly).
8 AHTR5024 Instruction Manual
24VAC
50Hz
H
H
H
H
N
CO
L
N
S1
H
N
CO
L
N
S1
H
N
CO
L
N
S1
H
N
CO
L
N
S1
H
N
CO
L
N
S1
SH
N
CO
L
N
S1
H

3. Thermostat Icons
BOX means to select mode.
e.g. means Hi temp is selected
means the Hi temp is not selected.
Sunny: Hi comfortable temperature
Moon: Low comfortable temperature
Indicates AUTO ON or AUTO OFF
Frost Protection Indicator:
Frost protection is active, not available in cooling mode.
Indicates that the Party Mode is active
Indicates that the Holiday Mode is ON.
Heat Mode indicator: Indicates heating is running
N
CO
L
N
S1
AHTR5024 Instruction Manual 9
N
CO
L
N
S1
H

5. Button Functions
4. Thermostat Icons Continued
Programs number indicator.
Indicates the time.
Indicates the the day of the week
Temporary override indicator:
The hand will appear until the next programs starting time.
Cool Mode indicator:
The icon is flashing when cooling mode is active
Temperature indicator
• Display the room temperature
• Display the set temp
10 AHTR5024 Instruction Manual

5. Button Functions
Mode selection.
Long press to return home without saving.
OK key. Short press to confirm selection.
Long press to save and return home.
Long press to enter Temperature offset Heat/Cool.
Decrease or increase Setpoint Temperature.
OR
Note: LCD backlight is activated by pressing any key.
Temporary override indicator:
The hand will appear until the next programs starting time.
AHTR5024 Instruction Manual 11

6. Setting Date and Time
6. Setting Date and Time When you first power up your device you
will have to set up the date and time.
Press to
confirm.
Press or to
choose 12/24 hr
then press
to confirm.
3
1 2
4
12 AHTR5024 Instruction Manual
X.x

6. Setting Date and Time
Set the hour
by using
or
Set the minutes
by using or .
Press to
confirm.
5 6
Set the date
using the
or . Press
to confirm.
7 8
Note: You can access the date and hour by long pressing . After that press
and to confirm.
When you first power up your device you
will have to set up the date and time.
AHTR5024 Instruction Manual 13
16

7. Setting Your Programs
Program Prole 1
7. Setting Your Programs You can customise your programs by long
pressing when on the program screen.
3
2
4
1
Set the hour using
or . Press
to confirm. Repeat
the procedure for
setting the minutes.
Select the desired
program or
by pressing or .
Press to confirm.
Note: If you want to select another Program Profile (from the available 5), please enter
in Installer Mode, choose option d17 and after that select the desired program.
14 AHTR5024 Instruction Manual

7. Setting Your Programs You can select and customise
any of the following programs:
Program Prole 1
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 9:00 Moon Moon
3 16:00 Sunny Sunny
4 23:00 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:00 Sunny Sunny
2 23:00 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
You can customise your programs by long
pressing when on the program screen.
Select the desired
program or
by pressing or .
Press to confirm.
Note: If you want to select another Program Profile (from the available 5), please enter
in Installer Mode, choose option d17 and after that select the desired program.
AHTR5024 Instruction Manual 15

7. Setting Your Programs
Program Prole 3
7. Setting Your Programs
Program Prole 2
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 22:30 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:00 Sunny Sunny
2 23:00 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
16 AHTR5024 Instruction Manual

7. Setting Your Programs
Program Prole 3
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 5:00 Sunny Sunny
2 8:00 Moon Moon
3 14:00 Sunny Sunny
4 22:00 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:30 Sunny Sunny
2 22:30 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
Program Prole 2
AHTR5024 Instruction Manual 17

Program Prole 5
7. Setting Your Programs
Program Prole 4
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 9:00 Moon Moon
3 15:00 Sunny Sunny
4 22:30 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:30 Sunny Sunny
2 23:00 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
18 AHTR5024 Instruction Manual

7. Setting Your Programs
Program Prole 5
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 10:00 Moon Moon
3 16:00 Sunny Sunny
4 23:00 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:30 Sunny Sunny
2 23:30 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
Program Prole 4
AHTR5024 Instruction Manual 19

9. Installer Mode
8. How to reset the thermostat
31 2
Press the indicated keys
together for 3 seconds.
Select P47 if you want to
reset to factory settings.
Press to confirm.
4 5
Press to confirm.
20 AHTR5024 Instruction Manual