SANY SSP90C-8 Guide

Quality Changes the World
Paver
SSP90C-8
SSP100C-8
Safety, Operation and Maintenance Manual

Find manuals at https://best-manuals.com

Safety, Operation and Maintenance Manual-December 2018
SSP90/100C-8 Paver
Safety, Operation and Maintenance Manual
WARNING
Read and follow the safety precautions and instructions in this manual and on the machine
decals. Failure to do can cause serious injury, death or property damage. Keep this manual with
the machine for reading and future reference.
SSP90/100C-8 Paver
Find manuals at https://best-manuals.com

Safety, Operation and Maintenance Manual-December 2018
SSP90/100C-8 Paver
Sany Group
SANY Automobile Manufacturing CO.,LTD
Sany Industry Zone, Economic & Technical Development Zone, Changsha, Hunan,
China 410100
Tel: [phone]
E-mail:[e-mail]
Website: www.sanyglobal.com
Scan here to download the Service Cloud APP
Android iOS
©2018 by Sany Group. All rights reserved. No part of this publication may be reproduced, used, distributed
or disclosed except during normal operation of the machine as described herein. All information included
within this publication was accurate at the time of publication. Product improvements, revisions, etc., may
result in differences between your machine and what is presented here. Sany Group assumes no liability.
For more information, contact Sany Group.
Find manuals at https://best-manuals.com

Safety, Operation and Maintenance Manual-December 2018 1
DELINEATION of RESPONSIBILITY
Specific Declaration
Pavers, which apply to pave various materials to produce a road base or surface, are special ma-
chines for paving asphalt mixture, RCC base material, stabilized soil material and road material (e.
g. graded broken stone). Any other use or any operation beyond the specified working range is not
authorized use. SANY expressly bears no liability for any consequence due to any unauthorized
use.
Information in this manual is used to guide qualified operators to operate and maintain pavers cor-
rectly. Sany expressly bears no liability for any consequence due to any use not observing the in-
formation in this manual.
It is forbidden to convert the paver without authorization. Sany expressly bears no liability for any
consequence. When crack or electrical malfunction on the paver occurs, please contact the suppli-
er, and don’t conduct welding or make changes without permission, or else, for any consequence
due to such contravention, Sany shall not bear any liability.
Use genuine spare parts from Sany. Sany expressly bears no liability for any machine damage or
accident due to the use of untested or unauthorized spare parts or tools.
Operate and maintain parts (such as engine, A/C) on the paver, and observe related regulations
on Users' guide supplied from their manufacturer.
Sany expressly bears no liability for any machine failure or damage due to force majeure of natural
disasters (earthquake, typhoon) and wars.
Sany cannot predict every circumstance that might involve a potential hazard in operation or main-
tenance. Operators and owners should highly attach importance to safety. Local specific safety
rules of the countries may be stricter. If they differ from the regulations in this manual, observe the
stricter one.
Duty of Sany
•Be responsible for providing qualified products and correct documents.
•Fulfill their promises on after-sales service, and document all maintenance and repair working
done by after-sales service personnel.
•Train the operation and maintenance personnel based on their needs.
Duty of Owners or Other Anthorized Personnel
•Only after each person involved in the product’s operation, maintenance and repair is trained
and fully understands the Parts Book and Safety, Operation and Maintenance Manual, can they
operate and maintain the paver.
SSP90/100C-8 Paver
Find manuals at https://best-manuals.com

2Safety, Operation and Maintenance Manual-December 2018
•Ensure the operation and maintenance personnel are qualified and know their related
responsibilities.
•Periodically check related personnel's safety consciousness during working.
•If any fault which will lead to unsafety occurs, stop the paver immediately.
•If necessary Sany service personnel have the right to check the paver for safety.
•Besides check items regulated by Sany, observe local laws and regulations to check the paver.
•Ensure timely maintenance and repair on the paver.
•Carefully plan the use of the paver.
Duty of All Working Personnel
•If there is any abnormal symptom which may cause abnormal working of the paver or potential
hazard, report to your leader. If possible, correct fault in time.
•All personnel working around the paver must observe all warning signals and take care of their
own and others' safety.
•All personnel should know their working tasks and procedures.
•Watch surrounding things like high voltage wire, unrelated personnel and poor ground for poten-
tial danger, and report to the operators and signalmen.
Duty of Managers
•Ensure the operators are trained and fully understand the Safety, Operation and Maintenance
Manual supplied by Sany. Ensure they are in physical fitness and have the certification of opera-
tion. Otherwise, it is forbidden to operate the paver.
•Ensure the operators have good judgment ability, teamwork consciousness and psychological
quality. Otherwise, it is forbidden to operate or repair the paver.
•Ensure the signalmen have good vision and acoustic judgment, master standard command sig-
nals. At the same time, they should have enough experience in recognizing danger factors cor-
rectly, and inform the operators of danger factors to avoid them in time.
•Ensure assistant workers can identify the model and working condition to choose a proper
paver.
•Publicize safety consciousness to working personnel, and make them aware of safety precau-
tions and their related responsibilities.
SSP90/100C-8 Paver
Find manuals at https://best-manuals.com

Safety, Operation and Maintenance Manual-December 2018 I
Table of Contents
1 Introduction........................................................................................................................1-1
1.1 Overview.................................................................................................................................1-3
1.2 Documentation Package......................................................................................................1-4
1.2.1 Introduction....................................................................................................................1-4
1.2.2 Recommendations on the Use of Documentation...................................................1-4
1.2.3 Documentation Storage...............................................................................................1-4
1.2.4 Organization of This Manual.......................................................................................1-4
1.3 Your Sany Machine...............................................................................................................1-6
1.3.1 Machine Directions.......................................................................................................1-6
1.3.2 Breaking in A New Machine........................................................................................1-6
1.3.3 Machine Information ....................................................................................................1-7
1.3.4 Serial Number and Distributor Information ...............................................................1-8
1.4 Contact Information ..............................................................................................................1-9
2 Safety.....................................................................................................................................2-1
2.1 General...................................................................................................................................2-5
2.1.1 Basic Principles and Legal Clauses...........................................................................2-5
2.1.2 Intended Use and Requirements of Working Environment....................................2-6
2.1.3 Unintended Use ............................................................................................................2-6
2.1.4 Qualifications of Operators .........................................................................................2-6
2.1.5 Responsibilities of Users .............................................................................................2-6
2.1.6 Unauthorized Conversions and Alterations to the Machine ...................................2-8
2.2 Safety Information.................................................................................................................2-8
2.2.1 Explanation on Safety Information.............................................................................2-8
2.2.2 Safety Alerts ..................................................................................................................2-8
2.2.3 Safety Decals and Safety Messages.........................................................................2-9
2.3 Preparations before Working............................................................................................ 2-17
2.3.1 Surveying the Worksite and Preparations before Working ................................. 2-17
2.3.2 Personal Protection................................................................................................... 2-19
2.3.3 Precautions for Asphalt Paving ............................................................................... 2-21
2.3.4 Precautions against Emergency ............................................................................. 2-21
2.4 Safe Driving and Working ................................................................................................. 2-24
2.4.1 Precautions for Driving and Working ...................................................................... 2-24
2.4.2 Check before Operation ........................................................................................... 2-26
2.4.3 Startup......................................................................................................................... 2-27
2.4.4 Driving the Machine .................................................................................................. 2-28
2.4.5 Safe Movement and Operation of Machine ........................................................... 2-28
SSP90/100C-8 Paver Table of Contents
Find manuals at https://best-manuals.com

II Safety, Operation and Maintenance Manual-December 2018
2.4.6 Precautions for Screed Operation........................................................................... 2-30
2.4.7 Precautions for Operation at Night.......................................................................... 2-30
2.5 Precautions for Maintenance............................................................................................ 2-30
2.5.1 Safe Maintenance ..................................................................................................... 2-30
2.5.2 Correctly Supporting the Machine........................................................................... 2-32
2.5.3 Working on the Hydraulic Oil Pipelines .................................................................. 2-32
2.5.4 Working on the Engine ............................................................................................. 2-34
2.5.5 Working on the Electrical Device ............................................................................ 2-34
2.5.6 Working on the Battery ............................................................................................. 2-34
2.5.7 Working with Fuel System........................................................................................ 2-35
2.5.8 Safe Storage of Parts................................................................................................ 2-36
2.5.9 Cleaning Precautions................................................................................................ 2-36
2.5.10 Correctly Using Tools.............................................................................................. 2-38
2.5.11 Removing Paint Before Welding or Heating........................................................ 2-38
2.5.12 Correct welding........................................................................................................ 2-39
2.6 Precautions for Repair....................................................................................................... 2-40
2.6.1 Use of Warning Labels.............................................................................................. 2-40
2.6.2 Repair.......................................................................................................................... 2-41
2.7 Machine Parking................................................................................................................. 2-43
2.7.1 Before Leaving the Machine .................................................................................... 2-43
2.7.2 Loading Machine ....................................................................................................... 2-43
2.7.3 Towing Machine......................................................................................................... 2-44
2.7.4 Hoisting Machine ....................................................................................................... 2-44
3 System Functions...........................................................................................................3-1
3.1 General Structure..................................................................................................................3-5
3.2 Power System........................................................................................................................3-5
3.3 Electrical System...................................................................................................................3-7
3.3.1 General ..........................................................................................................................3-7
3.3.2 Layout of Electrical Components on Main Control Console...................................3-9
3.3.3 Panel of Main Control Console................................................................................ 3-10
3.3.4 Use of Display ............................................................................................................ 3-22
3.3.5 Layout of Electric Control Cabinet .......................................................................... 3-32
3.3.6 Fuses in Electric Control Cabinet............................................................................ 3-33
3.3.7 Electrical Layout of Remote Control Box ............................................................... 3-34
3.4 Hydraulic System ............................................................................................................... 3-34
3.4.1 Structure ..................................................................................................................... 3-34
3.4.2 Travelling System ...................................................................................................... 3-35
3.4.3 Auger System............................................................................................................. 3-38
3.4.4 Conveyor System ...................................................................................................... 3-39
3.4.5 Tamping System ........................................................................................................ 3-40
Table of Contents SSP90/100C-8 Paver
Find manuals at https://best-manuals.com

Safety, Operation and Maintenance Manual-December 2018 III
3.4.6 Vibration System (Optional)..................................................................................... 3-40
3.4.7 Auxiliary System ........................................................................................................ 3-41
3.4.8 Hydraulic Accessories .............................................................................................. 3-41
3.5 Accessories and Other Devices....................................................................................... 3-42
3.5.1 Track Travelling System ........................................................................................... 3-42
3.5.2 Conveyor .................................................................................................................... 3-46
3.5.3 Auger........................................................................................................................... 3-52
3.5.4 Central Lubrication System...................................................................................... 3-56
3.5.5 Cleaning System ....................................................................................................... 3-57
3.5.6 Towed Arm.................................................................................................................. 3-59
3.5.7 Hopper ........................................................................................................................ 3-61
3.5.8 Tractor ......................................................................................................................... 3-62
3.5.9 Control System .......................................................................................................... 3-63
3.5.10 Seat Fence ............................................................................................................... 3-64
3.5.11 Canopy...................................................................................................................... 3-65
3.5.12 Covering Parts ......................................................................................................... 3-66
3.6 Screed Unit ......................................................................................................................... 3-67
3.6.1 Introduction................................................................................................................. 3-67
3.6.2 Mechanical Extension Screed ................................................................................. 3-68
3.6.3 Hydraulic Extension Screed..................................................................................... 3-76
4 Operation.............................................................................................................................4-1
4.1 Operator Qualifications ........................................................................................................4-5
4.2 Initial Use of the Paver .........................................................................................................4-5
4.3 Use of the Operation System ..............................................................................................4-6
4.3.1 Use of the Console.......................................................................................................4-6
4.3.2 Use of the Display ........................................................................................................4-7
4.3.3 Use of the Screed Panel..............................................................................................4-8
4.4 Machine Assembly............................................................................................................. 4-10
4.4.1 Mechanical Extension Screed Assembly and Adjustment .................................. 4-10
4.4.2 Hydraulic Extension Screed Assembly and Adjustment...................................... 4-25
4.4.3 Auger Assembly......................................................................................................... 4-41
4.4.4 Electrical Device Installation .................................................................................... 4-48
4.5 Operation before Starting the Machine........................................................................... 4-52
4.5.1 Operator’s Seat Adjustment..................................................................................... 4-52
4.5.2 Pre-operational Check.............................................................................................. 4-52
4.5.3 Check before Starting the Engine ........................................................................... 4-54
4.5.4 Electrical Control System Check............................................................................. 4-55
4.6 Engine Start-up................................................................................................................... 4-55
4.6.1 Introduction of Engine Start-up................................................................................ 4-55
4.6.2 Starting the Engine in Cold Weather ...................................................................... 4-58
SSP90/100C-8 Paver Table of Contents
Find manuals at https://best-manuals.com

IV Safety, Operation and Maintenance Manual-December 2018
4.6.3 Jump-start the Engine............................................................................................... 4-58
4.7 Adjustment without Load................................................................................................... 4-59
4.7.1 Introduction................................................................................................................. 4-59
4.7.2 Adjusting the Propel System.................................................................................... 4-60
4.7.3 Adjusting the Hopper ................................................................................................ 4-63
4.7.4 Adjusting the Conveyor System .............................................................................. 4-64
4.7.5 Adjusting the Auger System..................................................................................... 4-66
4.7.6 Adjusting the Leveling System ................................................................................ 4-67
4.7.7 Adjusting the Screed System................................................................................... 4-68
4.7.8 Adjusting the Towed Arm.......................................................................................... 4-70
4.7.9 Adjusting the Central Lubrication System.............................................................. 4-70
4.8 Construction........................................................................................................................ 4-71
4.8.1 Introduction................................................................................................................. 4-71
4.8.2 Line of Direction......................................................................................................... 4-71
4.8.3 Adjusting the Indicator Pole ..................................................................................... 4-72
4.8.4 Spraying Diesel Oil.................................................................................................... 4-72
4.8.5 Placing the Screed .................................................................................................... 4-73
4.8.6 Adjusting and Operating the Auto- leveling System............................................. 4-74
4.8.7 Butting the Truck........................................................................................................ 4-78
4.8.8 Feeding the Hopper .................................................................................................. 4-79
4.8.9 Operating the Conveyor ........................................................................................... 4-79
4.8.10 Operating the Auger................................................................................................ 4-79
4.8.11 Moving the Paver..................................................................................................... 4-80
4.8.12 Moving the Truck Away .......................................................................................... 4-80
4.8.13 Receiving the Material ............................................................................................ 4-80
4.9 Distributing the Material .................................................................................................... 4-80
4.10 Adjustment during Paving............................................................................................... 4-81
4.10.1 Adjusting the Paving Evenness............................................................................. 4-81
4.10.2 Adjusting the Paving Thickness ............................................................................ 4-82
4.10.3 Adjusting the Material Level................................................................................... 4-82
4.11 Stop the Machine ............................................................................................................. 4-82
4.12 Stop the Machine in Case of Emergency ..................................................................... 4-84
4.13 Transportation Information ............................................................................................. 4-84
4.13.1 Loading and Unloading .......................................................................................... 4-84
4.13.2 Packing ..................................................................................................................... 4-86
4.13.3 Precautions for Transporting the Machine........................................................... 4-87
4.13.4 Transferring the Machine ....................................................................................... 4-88
4.13.5 Storing the Machine ................................................................................................ 4-89
4.13.6 Lifting the Machine .................................................................................................. 4-89
5 Maintenance.......................................................................................................................5-1
Table of Contents SSP90/100C-8 Paver
Find manuals at https://best-manuals.com

Safety, Operation and Maintenance Manual-December 2018 V
5.1 General...................................................................................................................................5-5
5.1.1 Notes on Maintenance.................................................................................................5-5
5.1.2 Notes on Fuel System..................................................................................................5-5
5.1.3 Notes on Engine Performance ...................................................................................5-6
5.1.4 Notes on Hydraulic System.........................................................................................5-6
5.1.5 Notes on Cooling System............................................................................................5-7
5.2 Oil & Fluids Selection............................................................................................................5-7
5.2.1 General Requirements ................................................................................................5-7
5.2.2 Requirements of Oil and Fluids ............................................................................... 5-10
5.3 Maintenance ....................................................................................................................... 5-15
5.3.1 Introduction................................................................................................................. 5-15
5.3.2 Routine Maintenance................................................................................................ 5-15
5.3.3 Regular Maintenance................................................................................................ 5-16
5.3.4 Technical Maintenance for Long-time Storage ..................................................... 5-18
5.3.5 Maintenance for the Engine ..................................................................................... 5-19
5.3.6 Maintaining the Hydraulic System........................................................................... 5-35
5.3.7 Maintaining the Electric System .............................................................................. 5-37
5.3.8 Replacing the Gear Oil in Transfer Case ............................................................... 5-40
5.3.9 Routine Maintenance of Engine and Reducer ...................................................... 5-41
5.3.10 Lubricating Points.................................................................................................... 5-43
5.3.11 Routine Inspection of Tamper Blade, Base Plate, Auger Blade and
Conveyor................................................................................................................ 5-44
5.3.12 Hydraulic System .................................................................................................... 5-46
5.3.13 Electrical System..................................................................................................... 5-46
5.3.14 Propel System ......................................................................................................... 5-47
5.3.15 Screed....................................................................................................................... 5-48
5.3.16 Grease Points .......................................................................................................... 5-48
5.3.17 Fuel, Lubricant and Filling Amount ....................................................................... 5-49
5.3.18 Check the Bolts........................................................................................................ 5-49
5.4 Repair .................................................................................................................................. 5-50
5.4.1 General ....................................................................................................................... 5-50
5.4.2 Replacing the Conveyor Chain................................................................................ 5-52
5.4.3 Adjusting the Tension of Conveyor Chain.............................................................. 5-53
5.4.4 Replacing and Tensioning the Conveyor Drive Chain ......................................... 5-54
5.4.5 Removing and Installing the Conveyor .................................................................. 5-56
5.4.6 Replacing the Conveyor Reducer ........................................................................... 5-56
5.4.7 Replacing and Tensioning the Auger Chain .......................................................... 5-58
5.4.8 Adjusting the Tension of Auger Chain .................................................................... 5-59
5.4.9 Replacing the Auger Reducer ................................................................................. 5-60
5.4.10 Replacing the Travel Reducer............................................................................... 5-62
5.4.11 Replacing the Rubber Track Shoe........................................................................ 5-65
SSP90/100C-8 Paver Table of Contents

VI Safety, Operation and Maintenance Manual-December 2018
5.4.12 Replacing the Track Roller..................................................................................... 5-65
5.4.13 Installing and Removing the Hopper .................................................................... 5-66
5.4.14 Maintenance of Screed .......................................................................................... 5-67
5.4.15 Replacing the Propel Pump ................................................................................... 5-68
5.4.16 Replacing the Propel Motor ................................................................................... 5-69
5.4.17 Replacing the Tamper Motor ................................................................................. 5-70
5.4.18 Replacing the Oil Cylinders ................................................................................... 5-70
5.4.19 Adjusting Auxiliary System Pressure ................................................................... 5-78
5.4.20 Adjusting and Replacing Lubrication System...................................................... 5-83
6 Troubleshooting ..............................................................................................................6-1
6.1 Tractor.....................................................................................................................................6-3
6.1.1 Troubleshooting for Power System............................................................................6-3
6.1.2 Troubleshooting for Running System ..................................................................... 6-12
6.1.3 Troubleshooting for Conveyor ................................................................................. 6-13
6.1.4 Troubleshooting for Central Lubrication System................................................... 6-15
6.1.5 Troubleshooting for Cleaning Device ..................................................................... 6-15
6.1.6 Troubleshooting for Tractor...................................................................................... 6-16
6.1.7 Troubleshooting for Operating System .................................................................. 6-16
6.2 Troubleshooting for Screed .............................................................................................. 6-16
6.3 Troubleshooting for Hydraulic System ............................................................................ 6-18
6.3.1 Troubleshooting for Travel Hydraulic System ....................................................... 6-18
6.3.2 Troubleshooting for Auger Hydraulic System....................................................... 6-19
6.3.3 Troubleshooting for Conveyor Hydraulic System ................................................. 6-20
6.3.4 Troubleshooting for Tamper Hydraulic System..................................................... 6-21
6.3.5 Troubleshooting for Vibrator Hydraulic System .................................................... 6-21
6.3.6 Troubleshooting for Auxiliary System..................................................................... 6-22
6.4 Troubleshooting for Electrical System ............................................................................ 6-25
6.4.1 Troubleshooting for Electrical System.................................................................... 6-25
6.4.2 Troubleshooting for Circuit ....................................................................................... 6-28
6.4.3 Troubleshooting for Sensor...................................................................................... 6-29
6.4.4 Troubleshooting for Switch....................................................................................... 6-30
6.4.5 Troubleshooting for Controller ................................................................................. 6-31
6.4.6 Troubleshooting for Other Faults ............................................................................ 6-32
7 Specifications ...................................................................................................................7-1
7.1 Dimension Parameters.........................................................................................................7-3
7.2 Performance Parameters.....................................................................................................7-4
Table of Contents SSP90/100C-8 Paver

Safety, Operation and Maintenance Manual-December 2018 1-1
Introduction
1 Introduction........................................................................................................................1-1
1.1 Overview.................................................................................................................................1-3
1.2 Documentation Package......................................................................................................1-4
1.2.1 Introduction ..................................................................................................................1-4
1.2.2 Recommendations on the Use of Documentation .................................................1-4
1.2.3 Documentation Storage .............................................................................................1-4
1.2.4 Organization of This Manual......................................................................................1-4
1.3 Your Sany Machine...............................................................................................................1-6
1.3.1 Machine Directions .....................................................................................................1-6
1.3.2 Breaking in A New Machine.......................................................................................1-6
1.3.3 Machine Information ...................................................................................................1-7
1.3.4 Serial Number and Distributor Information..............................................................1-8
1.4 Contact Information ..............................................................................................................1-9
SSP90/100C-8 Paver Introduction

1-2 Safety, Operation and Maintenance Manual-December 2018
WARNING
Read and understand all safety precautions and instructions in this manual before reading any
other manuals provided with this machine and before operation or maintaining it.Failure to do
this could result in death or serious injury.
Introduction SSP90/100C-8 Paver

Safety, Operation and Maintenance Manual-December 2018 1-3
1.Introduction
1.1 Overview
Sany-built machine offers high-quality per-
formance and excellent aftersales service
support.
Sany-built machine is widely used throughout
the industry for various types of applications.
Sany is a leading manufacturer of heavy con-
struction machine worldwide.
Fig.1-1
This user's manual provides safety, operation,
maintenance, troubleshooting and technical
specifications. For proper and safe use and
maintenance of the machine, it is important to
read and understand this manual before using
the machine.
Items addressed in this manual are designed
to help you:
•Understand the structure and performance
of the machine.
•Reduce improper operation and point out
possible hazardous situations when using
the machine.
•Increase efficiency of the machine .
•Prolong the service life of the machine.
•Reduce maintenance costs.
Always keep this manual nearby and have all
personnel involved with any work operations
read it at any time.
Continuing improvements in the design can
lead to changes in details, which may not be
reflected in this manual. Always consult SANY
distributor or the manual distribution depart-
ment for the latest available information on
the machine or if you have questions on it.
SSP90/100C-8 Paver Introduction

1-4 Safety, Operation and Maintenance Manual-December 2018
1.2 Documentation Package
1.2.1 Introduction
The attached data includes:
•Safety, Operation and Maintenance Manual
•Parts Book
Parts Book includes Parts List and the draw-
ings needed when ordering parts. If the Parts
Book is not attached with the machine, con-
tact Sany.
1.2.2 Recommendations on the Use of
Documentation
•The attached documents only apply to the
machine herein.
•Ensure the documents are complete and
are the latest editions. Give the attached
documents to the new owner if the machine
is resold.
•Put all data in a folder (if including leaflets),
and print and replace the lost, damaged
and blotted documents.
•Add the latest Sany data in time and de-
stroy the inapplicable old documents.
1.2.3 Documentation Storage
•Store this user’s manual in the operation
room of the machine.
•Store the Parts Book in the maintenance
area or office so that the maintenance per-
sonnel can find it easily.
1.2.4 Organization of This Manual
This manual covers correct use and mainte-
nance of the machine. Get familiar with it be-
fore performing any operations. Put this
manual within easy reach for reference.
Introduction SSP90/100C-8 Paver

Safety, Operation and Maintenance Manual-December 2018 1-5
Replace the manual if it is lost or damaged.
Due to improvement and updating of prod-
ucts, some information may differ from the
machine. In case of any question on the ma-
chine, contact Sany distributor before operat-
ing or maintaining the machine.
1. Introduction
This section provides an overview of what is
covered in the rest of this manual, including
machine label information and SANY contact
information.
2. Safety
This section covers basic safety information
relating to this machine. Make sure you fully
understand all the precautions described in
this manual and the safety labels on the ma-
chine before operating or maintaining this ma-
chine. Failure to do so may result in serious
injury or death.
3. System functions
This section provides an overview of all the
controls, prompts and operating systems of
the machine. Only when you are familiar with
all systems, can you operate and maintain the
machine safely.
4. Operation
This section provides the basic operating pro-
cedures for the job. It is important to learn and
get familiar with all procedures before per-
forming any operations with the machine.
5. Maintenance
This section provides all general maintenance
and repair procedures. It is important to learn
and get familiar with all the maintenance and
repair procedures before performing any
maintenance or repair operations on the
machine.
SSP90/100C-8 Paver Introduction

1-6 Safety, Operation and Maintenance Manual-December 2018
6. Troubleshooting
This section outlines common malfunctions
and fault diagnostic procedures for the operat-
ing system of this paver. The basic trouble-
shooting methods for mechanical, hydraulic
and electrical systems are included.
7. Specifications
This section provides general information
about this machine. Some information may
change as design modification.
1.3 Your Sany Machine
1.3.1 Machine Directions
Fig.1-2
1. Front 3. Left
2. Back 4. Right
In this manual, machine directions are defined
as shown.
1.3.2 Breaking in A New Machine
The machine has been well adjusted and
tested before delivery, but the initial operation
on the machine in severe conditions will seri-
ously affect the performance or reduce the
1
2
3
4
Introduction SSP90/100C-8 Paver

Safety, Operation and Maintenance Manual-December 2018 1-7
service life of the machine. Thus Sany recom-
mends you to perform 50-hour test run before
putting the machine into production use.
During the test run:
•Preheat the machine before performing any
operations.
•Avoid operating or running the machine at a
high speed in overload working conditions.
•Avoid sudden starting, rapid movement or
abrupt stop of the machine.
•Before stopping the equipment, run the en-
gine at idle speed for 3-5 min at the end of
every working day.
1.3.3 Machine Information
The serial numbers and model numbers on
the components are the only numbers that
SANY distributor will need when ordering re-
placement parts or requiring assistance for
the machine. Users can find the related infor-
mation on the data plate. It is recommended
to record this information in this manual for fu-
ture use.
Fig.1-3
The data plate is riveted on the left side door
of the paver.
SSP90/100C-8 Paver Introduction

1-8 Safety, Operation and Maintenance Manual-December 2018
1.3.4 Serial Number and Distributor
Information
This location is for users to record information relating to the machine. Keep this manual
with the machine at all times for reference.
Product Model
Serial No.
Date of Production
Product ID Number
Distributor Name:
Address:
Phone Numbers:
Introduction SSP90/100C-8 Paver