Sanyipace 9300D User manual

Sewer Pipeline Inspection Camera
User Manual
Model No.：9300D
-------------------------------------------------------------------------------------------------------------------------------------------
Please contact us at first time if you got issues with the product
[e-mail]

Catalog
1. Notice ....................................................................... 1
2. Scope of Product Use .............................................. 1
3. Product Specification ............................................... 1
4. Product Details .........................................................2
(1) 9-inch Screen ......................................................2
(2) 4500mAh Rechargeable Battery .........................3
(3) Camera Probe .....................................................4
(4) Cable Coil ............................................................4
5. Accessories List ....................................................... 5
6. Device Install ............................................................5
7. Charger .................................................................... 6
8. Failure and Diagnosis .............................................. 7
9. Warranty ...................................................................7
Attention: The illustrations and screenshots of this manual are to
explain the product's operation, which may be a little different from
actual products due to the products' version upgrades and
different production batches. If the content in this manual does not
match your machine, please refer to the machine!

1
1. Notice
a. Please read the manual carefully before using the product.
b. Handle the device with care when operating, do not drop or push hard.
c. Do not dismantle the machine without permission.
d. Please turn off the monitor and disconnect the device after use.
e. Before inserting the TF card into the device, please back up the
information on the TF card to avoid loss of information.
f. Do not cut off the power suddenly during recording and playback,
otherwise, the product and video files may be damaged.
2. Scope of Product Use
a. Household pipeline blockage inspection
b. Pipe inspection camera, pipeline tools
c. Underground water pipes, HVAC systems, oil and gas pipelines
d. Rescue operations in narrow spaces
e. For underground exploration
f. Scientific research on underwater riverbeds
g. Sewer system inspection
h. Any other hard-to-reach locations/areas
3. Product Specification
Sensor: 1/3 CMOS
Camera diameter: 0.87in/22mm
Camera line source: 12pcs 1W high white LED (adjustable)
Camera angle and clarity: 145-degree / 1000TVL
Camera shell material: stainless steel/IP68 waterproof
Monitor Screen: 9-inch TFT color monitor
Function: video recording
TF card: includes 16GB TF card, max support 16GB
Display resolution: 16:9, 1024*600
Menu Language: Chinese/English optional
Display video format: AVI, marked with Year,Month,Date,Time and Seconds
Display operation: button
Working temperature: -4~140℉/-20~60℃

2
Storage temperature: -22~176℉/-30~80℃
Charger: 100VAC-240VAC DC 12.6V 1A
Battery: lithium battery 4500mAh
Battery continuous working time: about 6-8 hours
Max Inspection depth/material: 66ft/20m, 100ft/30m, 165ft/50m (optional)
harder high tenacity cable
4. Product Details
(1) 9-inch Screen
Button Functions
TF: Insert TF memory card
REC/-: (a) Press it to start or stop recording video;
(b) In system setting mode, press it to confirm the selection.
PLAY/+: Press it to start or pause video playback, and press "-" to play the
next video.

3
-: (a) Press it to take a photo;
(b) In system setting mode, press it to flip to the next selection.
M: Press it to go into the system setting, such as Time/Contrast/Brightness
/Colorful/Language setting; delete the videos, and pictures; or exit playback
or setting mode.
+: (a) Press it to view pictures;
(b) In system setting mode, press it to back to the previous selection.
Power: Screen switch on/off
(2) 4500mAh Rechargeable Battery

4
(3) Camera Probe
(4) Cable Coil
Put the cable on the hook, pull to release, or push back to coil the cable.

5
5. Accessories List
①Aluminum Box * 1 ②Power Charger * 1 ③Camera Probe * 1
④Cable Reel and Cable * 1 ⑤Battery * 1 ⑥User Manual * 1
⑦Camera protective cover * 1 ⑧Pipe Pulley * 1 ⑨16GB Micro SD Card * 1
⑩9” Screen * 1 ⑪Mini Screwdriver * 1 ⑫Connection Cable * 1
6. Device Install

6
7. Charger
When the battery is low power (< 20% ), please recharge it, the charging time
is about 4-5 hours. Working time is 6-8 hours after full charging
Note: To make sure the battery has longer use age, please recharge it timely;
otherwise, the battery may be damaged.

7
8. Failure and Diagnosis
9. Warranty
We provide a one-year product quality warranty from the date of purchase
and provide free lifetime product technical support. For normal faults or
quality problems within the warranty period, we provide free replacement or
repair services. For damage caused by manual operation, we will charge
the cost of product parts for repair. Our technical support team is at your
service 24 hours a day. If you encounter any problems during use, please
feel free to contact us.
----Contact Us----
Go to our website to download the user manual or view more products:
https://www.sanyipace.com
Website After-sale: serv[email protected]m
Amazon After-sale: [e-mail]
Facebook: Sanyipace
WhatsApp: [phone]
Problems/
Faults
Solutions
No power
a. Check whether each interface is connected correctly;
b. Check whether the battery is out of power, check the power
display.
Can't record videos
a. Whether the SD card is inserted correctly;
b. Insufficient SD card memory, format the SD card to try again;
c. Check whether the power was off during the recording process.
Can not be charged
a. Is the DC adapter plug-in correctly;
b. Check if the indicator light of the DC adapter is on.
Camera probe light
up but screen
shows "no signal"
a. Check whether the camera probe end is damaged or rust;
b. Adjust the camera probe and turn it slowly to confirm whether it
is loose;
c. Check that connections are well connected and make sure all
cables are properly connected;
d. You can use a voltage tester pen to test the device parts one by
one, find out the damaged part and contact us for replacement.