Sanyipace 9723D User manual

—1—
Pipe Sewer Pipeline Inspection Camera
User Manual
Model No.: 9723D
-----------------------------------------------------------------------------------------------------------------------
Please contact us at the first time if you got any issue with the product
[e-mail]

—2—
Catalog
Note…………………………………………………….…….......page 3
Range of product use……………………..…….......................page 3
Product specification……………………………………............page 3
Product parts details ……………..…………………......……....page 4
Accessories list…………………………..…………...................page 7
System install ……………………..…………..……...................page 8
Recharge............................................................……..............page 8
Failure and diagnosis.........................................……...............page 9
Warranty..............................................................……..............page 9
Attention:The illustrations and screenshots of this manual are to explain product's
operation, which may be little different from actual products due to the products'
version upgrades and different production batches. If the content in this manual
does not match your machine, please refer to the machine!

—3—
1：Note
1. Please read the manual carefully before using products.
2. Handle it carefully during operation, Do not drop or push it hard
3. Do not dismantle the machine without permission.
4. Please turn off the display and disconnect the device after using it.
5. Please copy the information of TF memory card before connecting it to
device
6. Do not suddenly cut off the power during recording and playing, which may
cause damage to product and video files.
2：Range of product use
1.Home pipe blocking inspection.
2.Pipeline Inspection Camera, pipeline tools.
3.Underground water pipe, HVAC system, oil and gas pipeline.
4.Rescue operations in a small space.
5.For underground expedition.
6.Underwater river bed scientific research.
7.Sewer system inspection
8.Any other position/area that is hard to reach.
3：Product specification
---Camera and cable---
Sensor: 1/3 CMOS
Camera size：21mm * 42mm.
Charger : 100VAC-240VAC DC 12.6V 1000MA.
Battery : lithium battery 4500mAH.
Battery continuous working time : about 6-8 hours.
Max Inspection depth/material: 20M 30M 50M (optional) high elastic cable
Camera line source : 6pcs 1W high white LED（adjustable ）.
Camera angle and clarity: 145 degree /HD 1000TVL .
Camera material: stainless steel /IP68 waterproof camera .
Camera protective cover size /material : 38mm*28mm/ plastic steel .

—4—
---Display---
Size：7 inch
Camera /monitor picture : color
SD card : max support 32GB,factory standard 8GB .
Display resolution：7 inch ,16：9, 960*480.
Menu ：Chinese /English optional .
Display video format: AVI with Year,Month,Date,Time and Seconds
Display operate : button .
Working temperature : -20-60 ℃.
Storage temperature : -30-80 ℃.
4：Device Parts details:
(1) Screen
Display : 7inch ,16:9
Resolution : 960*480
Power input :DC12V
Max support 32GB SD card
Language : Chinese / English
Video Format : AVI
Photo format : JPG

—5—
Display operation:
1.turn on
Connect the connectors, turn on the battery switch, press the power button
on the screen, and the system will start to work
2.setting
Press MENU enter, after selecting Set, press “Play/+ ” or “Rec/- ” to confirm,
Can set language/image/storage/clock .
3.Video Recording : pres “Rec/- ” to start recording , press “Rec/- ” again to
stop .
4.Video Browsing and Play : press “PLAY/+” play video, press “>” or “<”play
next video, and press “Menu” to exit.
5.Take Photo: press “>” to take photo quickly, but it does not work on video
recording mode.
6.Picture browsing: Press “<” to view pictures quickly
How to take out the memory card?
1: Press the buttons
on both sides of the
display at the same
time to pop the
display out.
2: There is an SD
card slot on the left
side of the screen,
press it to pop out.

—6—
(2) 4500mah Battery
It takes about 4-5
hours for fully
charged.
Charging voltage
is DC12.6V, with
power battery
display on battery.
(3) Camera (Waterproof Level IP68)

—7—
(4) Cable Coil
Put the cable on the hook, pull to release or push back to coil the cable.
5: Accessories list
1：Aluminum box * 1 2：Charger * 1 3：Camera Probe * 1
4: Cable coil * 1 5：Battery * 1 6：User Manual * 1 7：Camera Protective
Cover*1 8：Pipe Pulley * 1 9：8GB SD card * 1 10：LCD Monitor * 1
11: Mini screwdriver * 1 12: Connection cable * 1

—8—
6：System install (as below picture)
7: Recharge
When the battery is low power (< 20% ), please recharge it, the recharge time
is about 4-5 hours. Working time is 6-8 hours after full charging
Notes: To make sure the battery has longer use age, please recharge it timely;
otherwise, the battery may be damaged.

—9—
8：Failure and Diagnosis
9: Warranty
We provide 1-year-warranty of the products quality from purchased day,
include free replacement or repair service for the normal breakdown or
quality issue within warranty period. But for the damaged caused by against
the manual operation, we would charge the cost of products parts to repair.
We have our technician support team for 24hrs inline to receive your
inquiry/ask question, if you have any problem on products operation, please
feel free to contact us.
-----Contact Us-----
Go to our website to download use manual or check more Products:
https://www.sanyipace.com/
Our Email: [e-mail]
We support spare parts replacing, please contact us at the first time when
you got issues with our product.
Common problems / faults
solutions
indicator light on
No image
1: Check whether each connector is
connected and the camera needs to be
tightened.
2：Check if the battery is fully charged and try
again after it is fully charged .
No power
1：Check whether each connector are
connected correct .
2：Battery is exhausted ? check the battery
display
Can't record
1：Is the card inserted into correctly
2：The new card is formatted
3：Whether the device is power off during
recording
Can not be charged
1：check the charger indicator light is on ?
2：Is the DC plug inserted good ?