Sanyipace F9C13 User manual

Sewer Inspection Camera
User Manual
Model No.: F9C13
-----------------------------------------------------------------------------------------------------------------------------------
Please contact us the first time if you got any issues with the product
[email protected]

Catalog
1. Notice....................................................................................1
2. Application............................................................................ 1
3 . Specification.........................................................................1
(1) Camera and Cable...............................................................1
(2) LCD Monitor....................................................................... 2
4. Operation.............................................................................. 3
(1) Monitor Operation............................................................. 3
(2) Camera Probe.....................................................................4
(3) Cable Coil............................................................................5
5. Accessories List......................................................................5
6. System Install........................................................................ 6
7. Charger..................................................................................7
8. Failure and Diagnosis.............................................................7
9. Warranty............................................................................... 8
Attention: The illustrations and screenshots of this manual are to
explain the product's operation, which may be a little different from
actual products due to the products' version upgrades and
different production batches. If the content in this manual does not
match your machine, please refer to the machine!

—1—
1. Notice
1. Please read the manual carefully before using it.
2. Handle it carefully during operation, avoid throwing down or pressing it heavily.
3. If the users disassemble or deliberately damage the machine, it will beyond the
warranty.
4. Please turn off the display and pull out all the connection joints after using it.
5. Please copy your information before connecting the TF card.
6. Don’t suddenly cut off the power during recording and playing. This may damage
the product and video files.
2. Application
1. pipe dredging machine
2. Pipe inspection camera Pipe tool
3. underground pipelines, air conditioning pipelines, oil and gas pipelines
4. Rescue work in a small space
5. For underground exploration
6. Underwater riverbed research
7. Underground TV
3. Specification
(1) Camera and Cable
Sensor: 1/3 CMOS
Resolution: AHD 1080P
Camera Diameter: 0.5in/13mm
Cable Diameter: 0.15in/3.8mm

—2—
Cable Length: 33ft/10m, 66ft/20m, 92ft/28m fiber tube optional
LED: 6pcs White LED
View Angle: 90-degree
Camera Material: stainless steel, sapphire lens, IP68 waterproof
Accessories: Magnet & Hook
Protective Cover: 0.9in*0.8in/23mm*20mm
(2) LCD Monitor
Size: 9-inch IPS
Function: Video record/audio record/photo/power display
Camera/Monitor Image: Color
Monitor Input Voltage: DC 12V
TF Card: Max support 128GB card (include 16GB card)
Display Resolution: 1024*600 IPS
Menu Language: Chinese/English/Russian/French/German Optional
Display Operation: Press button
Video format: AVI
Photo format: JPG
Built-in Battery: 2600mAh rechargeable lion-battery
Operate Temperature: -4~140℉/-20~60℃
Storage Temperature: -22~176℉/-30~80℃
Warm reminder: Please refer to the following related instructions for the product
you purchased.

—3—
4. Operation
Whole System:
2600mAh Rechargeable Battery was built into the box cover
(1) Monitor Operation
TF card: Support up to 128GB micro SD card (includes a 16GB SD card), press it to
pop out.

—4—
1. Turn On: Connect all cables, turn on the machine, and the system is starting up.
2. Menu Setting (It needs to exit the record mode): Press MENU/EXIT button to
enter the menu setting, press >/PHOTO </ZOOM to select, press REC/- to confirm,
press MENU/EXIT to exit, can do time setting/playback setting/display
setting/record setting/system setting.
3. Record Video: Press REC/- to start recording, press again to stop.
4. Playback Video: Press PLAY/+ to enter image browsing, press it again to enter
video playback, press < > button to select, press REC/- to play, press it again to exit.
If you need to playback with sound, please play on a PC.
5. Delete Picture or Video Operation: After entering a picture or video browsing,
press the MENU/EXIT key to select, press >/PHOTO </ZOOM key to select delete
mode, press REC/- to confirm.
6. Take Photo: Press >/PHOTO to take a picture.
7. Zoom Key: Press </ZOOM to zoom in or zoom out 0-5 times.
(2) Camera Probe

—5—
(3) Cable Coil (10m 20m 30m optional)
Put the cable on the hook, pull to release or push back to coil the cable.
5. Accessories List
①Aluminum Box * 1 (Built-in Battery) ②Power Adapter * 1
③Camera Probe * 1 ④Cable Reel and Cable * 1 ⑤User Manual * 1
⑥Camera Protective Cover * 1 ⑦Magnet * 1 ⑧Hook * 1
⑨16GB Micro SD Card * 1 ⑩9’’ Screen * 1 ⑪Mini Screwdriver * 1
⑫Connection Cable* 1

—6—
6. System Install

—7—
7. Charger
When
the battery is under low power (< 20% ), please recharge it, the charging time is
about 4-5 hours. Working time is 4-6 hours after full charging.
Notes: To make sure the battery has longer use age, please recharge it timely;
otherwise, the battery may be damaged.
8. Failure and Diagnosis
Common Problems
Solutions
Indicator light on
No image
A. Check whether each connector is connected and the
camera needs to be tightened.
B. Check if the battery is fully charged and try again after it
is fully charged.
No power
A. Check whether each connector is connected correctly.
B. Battery is out of power? check the battery indicator.
Can't record
A. Is the card inserted into the correct place
B. Check if the memory card space is full, try to format it
C. Whether the recording process is powered off
Can not be charged
A. check the charger indicator light is on.
B. Is the DC plug inserted well?

—8—
9. Warranty
We provide one year warranty for the product, and free replacement within 7 days
for any quality problems. From the day you purchased, we provide free
maintenance for the normal breakdown, but for the damage caused by operation
against the manual, we will charge for the cost fee for the spare parts to maintain
even if product is under the warranty.
-----Contact Us-----
Go to our website to download use manual or check more Products:
http://www.sanyipace.com
Technology Support/After Sale Email: [e-mail]
Facebook: Sanyipace
We support spare parts replacing, please contact us at the first time when you got
issues with our product.
Camera probe light
up but screen shows
" no signal "
A. Check if there is damage or rust on the camera probe
end.
B. Keep screwing the camera probe to the cable reel from
loose to tight until it shows an image.
C. You can use a voltage tester pen or multimeter to test
the parts of the device one by one, find out the damaged
part and contact us for replacement.