Sanyo VHR-770 User manual

FILE NO.
SERVICE MANUAL
Video Cassette Recorder
..@,~@ .—,
CONTENTS
SELF-DIAGNOSIS DISPLAY .................................................... 2
1. Disassembly ..................................................#.................5
2. Electrical ADJusTMENT ..............................................9
3. TEST POINTS FOR TAPE PATH ADJUSTMENT .............13
4. PARTS LIST
MECHANISM PARTS ......................................................... 14
Accessories .................................................................. 16
PACKING MATERIALS .... ... .... . .................................... 16
CABINET &Ct+ASSIS PARTS ........................................... 16
ELECTRICAL PARTS ........................................................ 17
CIRCUIT DIAGRAMS (Refer to the separate volume)
~‘RODucT‘AFETY‘OT’cE
Sx@’Mio
VHR-770
(Product Code :143171 56)
(Australia)
VHR-770
(Product Code :143171 57)
(New Zealand)
Please see other materials with Reference
number given in table below.
Materials \Model No. \Reference No.
V95 I
Mechanism Mechanism MM531433
Manual V95 II
Mechanism MS531 500
The components designated by asymbol (~) in this schematic diagram designates components whose value are of special
significance to product safety. Should any component designated by asymbol need to be replaced, use only the part designated
in the parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE: 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N.S. P. :Not available as service parts.
Design and specifications are subject to change without notice.
MP2HNIA, NZ REFERENCE No.SM531606

SELF-DIAGNOSIS DISPLAY
Mechanism Mode Display/ Head Output Drop Warning Display/Cylinder Rotation Accumulated
Time Display
This unit displays the diagnosis contents of abnormalities and the mechanism, mode on its display panel in 2-digit numbers.
When the head playback output has dropped, the “L” sign will be blinked. Some models (listed later) will also display the cylinder
rotation accumulated time.
These display shows the outline of the problems. Use it as areference when servicing the unit.
1. Self-Diagnosis Contentes and Mechanism Mode Display
.
●
●
●
When the STOP button on the remote control is pressed for about 10 seconds continuously, the self-diagnosis number will be
displayed on the reception channel display of the display panel and number indicating the failed mechanism mode (changed mode
when being shifted) on the tape counter “seconds” display for 10 seconds each.
During self-diagnosis display, displays other than the diagnosis numberlmechanism mode number and the cylinder accumulated
rotation time display described later (some models only) will be turned off and when displays end, the normal display will be
returned automatically.
Refer to “Self-Diagnosis Contents” for the self-diagnosis numbers and the “Mechanism Mode Display Contents” for the
mechanism mode numbers.
When the “O” button on the remote control unit is pressed during display, and clearing the self-diagnosis display and mechanism
mode display.
Display panel I1-
Self-Diagnosis number Mechanism mode number
(Reception channel display) (Tape counter “Seconds” display)
Self-Diagnosis Contents
No. Problem Main Possible Cause Mechanism Operations and
State After Occurrence
00 There is no abnormality in the mechanism.
The cylinder motor does not rotate. ●The cylinder motor is faulty. Shifts to the STOP mode.
01 ●The control of the cylinder motor is
faulty.
●The tape winds around the cylinder.
The take-up reel does not rotate. ●The take-up reel is caught. Shifts to the STOP mode.
02 ●The reel belt is faulty.
●The take-up torque has decreased.
The capstan motor does not rotate. ●The capstan motor is faulty. Shifts to the STOP mode.
03 ●The control of the capstan motor is
faulty.
The tape cannot be loaded with the ●Error in the operations of the tape Unloads, shifts to the INITIAL mo
cassette inserted. loading mechanism. and the power goes off.
(But unloading can be performed.) ●Foreign particles in the tape load-
04 ing mechanism.
●The tape end sensor is faulty.
●The reel brake of the tape cassette
has not been released.
Tape loading and unloading cannot ●The tape guide is caught. The power is forcibly turned off v
05 be performed with the cassette in- ●The loading motor is faulty. the mechanism at its current positi
serted. ●The control of the loading motor is
faulty.
I
)de,
Mith
ion.
–2-

No. Problem Main Possible Cause Mechanism Operations and
State After Occurrence
Front unloading cannot be performed ●The cassette drive mechanism is Front loads and shifts to the STOP or
when ejecting the cassette. faulty. INITIAL mode.
(Front loading can be performed.) ●The front door is caught. ●When the power switch is turned on
before eject operations: Shifts to the
06 STOP mode.
●When the power switch is turned off
before eject operations: Shifts to the
INITIAL mode and the power goes
off.
Front loading and front unloading can- ●The tape cassette is caught in the The power is forcibly turned off with
not be performed when ejecting the cassette drive mechanism. the mechanism at its current position.
cassette. ●The main cam and front rack gear of
07 the front loading mechanism have
not engaged properly.
●The gears of the front loading drive
mechanism have not engaged prop-
erly.
The mechanism becomes 1(RE- ●The mechanism mode switch con- The power is forcibly turned off with
08 VIEW) while moving from 2(IDLER), tact is faulty. the mechanism at its current position.
3(STILL), 4(BRAKE), and to 5
(STOP).
The mechanism becomes 7(INITIAL) ●The mechanism mode switch con- Carries out tape take-up operations,
09 while moving from 1(REVIEW), 2tact is faulty. shifts to the INITIAL mode, and the
(IDLER), 3(STILL), 4(BRAKE), and power goes off.
to 5(STOP).
Note: For details of mechanism operations corresponding to the mechanism positions of the self-diagnosis numbers 08 and 09 above,
refer to the separate volume on the V95 Imechanism manual. These manual reference numbers are shown in the cover.
Mechanism Mode Display Contents
Mode No. Mechanism Mode Mode No. Mechanism Mode Mode No. Mechanism Mode
00 CASSETTE OUT 08 PLAY 16 VIDEO INSERT
01 STANDBY 09 REC 17 VIDEO INSERT-PAUSE
02 STOP 10 AUDIO DUBBING 18 AUDIO/VIDEO INSERT
03 STILL 11 X2 SPEED PLAY 19 REVERSE X2 SPEED PLAY
04 REC-PAUSE 12 CUE
05 AUDIO DUBBING-PAUSE 13 REVIEW
06 FRAME ADVANCE 14 FAST FORWARD
07 SLOW 15 REWIND 99 OTHERS
●When the STOP button on the remote control is pressed for 10 seconds continuously 10 seconds after play starts, “L” will be
displayed blinking at the first digit of the minutes position on the tape counter when the head output is lower than the specified
value to indicate an abnormality.
●The cause of the abnormality maybe due to drop in the playback output caused by drop in the efficiency of the cassette used or
head clogging. Refer to “Head Playback Output Voltage Check” as ameans to judge the abnormality.
-.
Display panel Ill I II 3
IxI - --
IIll
Head output drop warning display
(Tape counter”1 st digit of Minutes.” position)
–3–

Head playback output voltage check
:assette Used
Cassette
with normal
playback
output
Recorded
cassette
(with tabs)
Rental
cassette
(without tabs)
3.
●
●
Warning
Display
L“ blinking
L“ blinking
L“ blinking
Envelope Detection Output Voltage
Envelope detec- 4v1-----------------------------------
tion output
I
(IC301 Pin 250r -~-..-----::.~.-..---.TI- -4
R3032 Mark side: -V-- 0.5-0,95V
L
see Fig. 2-I-I) ov II
Switching pulse
(TP183: see Fig. CH-1 CH-2
2-l-2) &lz
‘nve’ope ‘etec- 4V -----------------------------------
tion output
(IC301 Pin 25 or
R3032 Mark side:
see Fig. 2-l-1) Ov
Switching pulse
(TP183: see Fig, CH-1 CH-2
2-1 -2)
More than
0.95V
Envelope detec- 4V ...................................
tion output
(IC301 Pin 25 or t-----------------------------------
R3032 Mark side: 4Less than
see Fig. 2-l-1) ov
Switching pulse -+0.5V
t I
(TP183: see Fig.
2-l-2) I-x!u_lCH-2L
Envelope detec-
tion outout 4Vt-----------------------------------
~!m:$~han
(IC301 Pin 25 or
R3032 Mark side:
see Fig. 2-l-1) Ov
Switching pulse _
(TP183: see Fig.
2-l-2) P-J CH-2 L
Main Cause
When the output voltage differ-
ence of the two channels is 0.5
to 0.95V
●The video heads of both are
normal
When the output voltage differ-
ence of the two channels is
more than 0.95V
●Tracking adjustment has not
When the average output volt-
age of the two channels is less
than 0.5V
●Tracking adjustment has not
been performed accurately
●Both video heads are clogged
●Both video heads have worn
out
When the output voltage dif-
ference of the two channels is
more than 0.95V
●Tracking adjustment has not
been performed accurately
●One video head is clogged
●One video head has worn out
●Some rental cassettes may have extremely low video playback outputs even when both video heads are normal.
As the average output voltage of the two heads maybe less than 0.5V for some, no warning displays will be
shown.
Cylinder rotation accumulated time display
Press the STOP button on the remote control for approximately 10 seconds and the cylinder rotation accumulated time excluding
the cassette out and standby operation time will be displayed on the “Hours” display in units of 100 hours. (“33” will be displayed
for 10 seconds for 3,200 to 3,299 hours.)
To erase the cylinder rotation accumulated time display, press the RESET button on the remote control during the accumulated
time display.
--
Display panel HI gg nJ
U:( Lit --
w
Cylinder rotation accumulated display (Tape counter “Hours” display)
–4–

1. DISASSEMBLY
1-1. REMOVAL OF CABINET, MECHANISM UNIT, AND MAIN BOARD
REMOVING THE CABINET PARTS (Fig. l-l-l) 1.
1.
2.
Remove the cabinet and bottom cover by removing the four
screws @and four screws ~. 2.
Remove the front panel by removing the locks of the clamps 3.
(A) using ascrewdriver, etc. and slightly rotating the bottom ~,
part in the direction of the arrow.
Notes: ●Electrical adjustments for the this model can be
performed with only the cabinet removed.
●When replacing the bottom cover, do not tighten the
screws @too much. Excess tightness may damage
the screws taps on the chassis. 5.
REMOVING THE MECHANISM MAIN UNIT AND THE
CP-1 PWB ASSEMBLY (Fig. 1-1-2 and l-l-3)
After removing the cabinet parts, remove the mechanism unit
and the CP-1 PWB assembly connected as follows.
Spread out the lock clamps (C) in the arrow direction
slightly and remove the TM-1 PWB as shown in Fig. 1-1-2.
Remove the screw oat the chassis.
Remove the screw @in the chassis, the screw (6), and the
holder in this order.
Remove the two screws n and two screws @of the
mechanism unit. The two screws @of the cassette tray can
be removed easily by pushing the tray lock lever in the
arrow direction to remove the lock as shown in the enlarge
view Aand by pushing the lid opener lever in the arrow
direction to remove the lock as shown in the enlarge view
B.
Lift up the whole mechanism unit and main board (CP-1
PWB assembly), and as shown in Fig. 1-1-3, push the two
lock clamps (D) of the chassis in the arrow direction so that
they can be removed from the chassis.
M-PF2HNrTA-l
Front Panel Unit
ver
(2J3
Fig. 1-1-1
-5-

M-P F2HN/rA-2
Tray Lock Lever.
M-PF2HN~A-3
TM-2 FAssembly
Chassis
Fig. 1-1-3 I
–6-

1-2. TEMPORARILY SEITING UP AND CONNECTING CP-1 PWB ASSEMBLY
The following is an example of how to place and connect the main board without ajig, when repairing the CP-1 PWB assembly.
1. Place the mechanism unit and main board up side down as 2. Operete the unit using the buttons on TM-1 PWB or the
awhole on a flat surface with foil side of the main board remote control.
facing up.
M-PF2HN~A-4 CP-1 PWB Assembly (Foii side)
\
Screws @
%
L1-,..- 1..-.1 0--...4
Mechanism Main Unit
TM-1 PWB
v.W%
Cassette ComDariment w\ TM-2 PWB Fig. 1-1-4
1-3. INSTALLATION OF THE FRONT PANEL
When installing the front panel to the chassis after repaires and adjustments.
1. Pressing down the door opener lever of the mechanism Note: Opened cassette door position does not install the front
main unit. panel to the chassis.
2. Set the cassette door to half-opened state as shown in Fig.
1-1-5, and install the front panel to the chassis.
M-PF2HNiTA -5 Jutted part of
Front
(Position B) Fig. 1-1-5
–7-

1-4. CIRCUIT BOARD LOCATIONS
L-MP2HN/A, MP2HN/Nz
VHR-770
(Australia)
TN-3 PWB
TM-1 PWB
TB-2
VHR-770
(New Zealand)
TN-5 PWB
TM-1 PWB
CP-1 PWB
CP-1
Assembly
PWB Assembly
–8–

2. ELECTRICAL ADJUSTMENT
VCR PRESETTING
This VCR need three basic presetting by using the menus displayed on-screen. After all connection have been made, then follow steps
1to 3to preset the VCR.
The three presetting steps will be displayed in sequence on TV screen. The setting are entered with the remote control.
Turn on the VCR
1. Adjusting the TV receiver to the video channel: The AUTO SETUP screen will appear. When the video channel has been preset,
press the OK button on the remote control.
2. Country selection: Using the numeric button, select the country of use.
3. Language selection: When the desired language has been select, press the MENLYTV button directly before prevent auto tuning
will start.
When steps 1to 3have been finish, ready to operate the all operating mode.
2-1. SERVO CIRCUIT ADJUSTMENT
.These adjustments should be done upon completion of the tape transport adjustments.
●If the tape transport adjustments (except the tilt adjustment) are done after these adjustments, follow the procedures again in
section 2-1-3, “Switching position adj. ”
●When acassette tape is loaded, auto-tracking will be set immediately after starting the first playback. As this will daviate the
tracking center set, be sure to press the channel buttons (-i-) and (–) once directly after starting playback to prevent auto-tracking
from being set.
2-1-1. TEST EQUIPMENT AND STANDARDS REQUIRED
Oscilloscope Vertical sensitivity :5 mV/DIV, external trigger
Bandwidth :more than 10 MHz
Alignment Tape VHJ-0009 or VHJ-0023 :SP mode, monoscope, 6KHz
Blank Tape VHS-type cassette tape
Monitor TV
2-1-2. LOCATION OF ADJUSTMENT POINTS
P12000B
10
PVR351
,....
{al: *O on
CP-1 PWB (Foil side) Fig. 2-1-1
–9–

TP183 TP182
(SW-P) (ENV.)
u@@
1a
VP-1 PWB Assembly Fig. 2-1-2
2-1-3. SWITCHING POSITION ADJ.
Measuring Point MeasuringEquipment Adj. Condition
TP1OI Oscilloscope PIAY (SP) mode
(VIDEO OUT) Alignment tape
TP183 (SW-P) (VHJ-0009 or
VHJ-0023)
Adj. Location Adj. Value
VR351 (SW-P) 6.5 Ht0.5 H
1. Play back the alignment tape.
2. Set the tracking control position to the center by pressing
CHANNEL buttons (-t) and (–) simultaneously.
3. Adjust VR351 (SW-P) so that the width of “T” becomes 6.5
H+().5 1+ as shown in Fig. 2-1-3.
WS-SWP
T=6.5H tO.5H
.*
0.5H
N,h~”,”u ,
}
Front edge of
vertical sync signal
ft
Rise RF. SW. PULSE
Fig. 2-1-3
–lo-

2-2. VIDEO CIRCUIT RELAY JIG
2-2-1. TEST EQUIPMENT AND STANDARDS REQUIRED
Color Bar Signal Generator PAL Color bar signel with 100°A white level (EBU color bar signel)
Oscilloscope Vertical sensitivity :5 mV/DIV, external trigger
Bandwidth :more than 10 MHz
Oscilloscope Probe Input capacity :less than 25 pF (10:1)
less than 40 pF (1:1 )
Covering frequency :DC-40 MHZ(IO:I)
DC-30 MHZ(I:I)
Digital Voltmeter DC range
Alignment Tape VHJ-0008 or VHJ-0023 :SP mode, color bar, 1kHz
(Color bar signal waveform is described below. Refer to Fig. 2-2-1)
Relay Jig VHJ-0066 :7-wire flat cable for VP-1 PWB assembly
ALIGNMENT TAPE COLOR BAR SIGNAL
WPV-TCS
bite
Iv
PP
‘H.Sync Signal
Color bar signal waveform (VHJ-0008)
WPV.TCP
(75%)
Fig. 2-2-1
Color bar pattern (VHJ-0008) on monitor TV
Fig. 2-2-2
RELAY JIG
Connect the flat cable end from the cylinder assembly to the
VP-1 PWB assembly using the relay jig to provide simple
repairing of the VP-1 PWB assembly, as shown in Fig.2-2-3.
Further, when adjusting the VP-1 PWB assembly, be sure to
make contact an end of shield case with bracket of the VP-1
PWB assembly to maintain the shield effect. If the VP-1 PWB
assembly does not contact, there is insufficient ground and no
proper play back image can be obtained.
RJ-MP4/GsY
v
Fig. 2-2-3
–11–

2-3. MTS DECODER CIRCUIT ADJUSTMENT for VHR-770 (Australia)
●If adjusting the MTS Decoder circuit, special equipment “Before making these adjustments, be sure to make the
shown in section 2-4-1. is necessaty. adjustments described in section 2-1. “Servo Circuit.”,
●Improper adjustment will cause loss of performance of section 2-2. “Video Circuit Relay Jig. ”
stereo sound and bilingual sound detection.
2-3-1. TEST EQUIPMENT AND STANDARDS REQUIRED
Audio Multiplex TV signal Generator
Oscilloscope
AC Voltmeter
Low Path Filter 15 kHz (48dB/oct)
2-3-2. LOCATION OF ADJUSTMENT POINTS
P36200E
3inl !
Tuner ~------~
:0
,,
,,
,8
,1
,,
8,
,1
,,
,,
,,
,,
:0
,,
1,
,8
,1
,1
II
II
II
,,
I,-., I
: :....,!I
,.-.
>
II
II VR
,,
,,
,,---
: :....;, i-
~-_’~~-; XThese VRS
are Dosi-
tionbd with
!-,
:: the models.
on
CP-1 PWB (Foil side) Fig. 2-3-1
Note:
●Set the following remote control button to the positions
indicated below, before making following adjustments.
IREMOTE CONTROL BUITON IPOSITION “I
TAPE SPEED SP
INPUT AV
IAUDIO ILR I
2-3-3. SEPARATION ADJ.
Measuring Point
AUDIO OUTPUT
terminal
EURO pin3 (Lch]
MeasuringEquipment
Audio Multiplex TV
signal generator
Oscilloscope
Low path filter
15 kHz (48 dB/oct)
Adj. Condition
E-E mode
Adj. Location Adj. Value
VR631 (SEPARATION) Minimumlevel
1.
2.
3.
4.
Input the output signal of the audio multiplex TV signal
generator into the VCR ANT input terminal.
Connect the oscilloscope to the audio output terminal
EURO pin 3(Lch) of the VCR via the LPF.
Set the audio multiplex TV signal generator as follows.
Audio signal Rch: 1kHz 30?’. modulation
Audio signal Lch: Unmodulation
Adjust VR631 (SEPARATION) so that the output of the
audio output terminal (Lch) is brought to its minimum level.
–12–

2-4. IF CIRCUIT ADJUSTMENT
●In this model, the circuits of the TUNER, IF, and RF Note: The 3in tuner dose not need any adjustments, because
converter have been made into one. Therefore, should one precise adjustments were down before shipment.
circuit malfunction, the whole unit must be replaced.
●The adjustments for the IF (RF AGC) circuit of the 3in 1
tuner are described below.
2-4-1. TEST EQUIPMENT AND STANDARD REQUIRED
Monitor TV
2-4-2. LOCATION OF ADJUSTMENT POINT
P36200EI
Rear Panel uhY
3in 1Tuner c>
0>
c. >
CP-1 PWB
Assembly —c>
<. >
<>
VR -c. >
9
c>
“e‘
7
3in 1Tuner Fig. 2-4-1
2-4-3. RF AGC ADJ.
Measuring Point MeasuringEquipment Adj. Condition
Pictureof MonitorTV E-E mode
monitorTV
Adj. Location Adj. Value
VR (RF AGC) SIN is best point
(on the 3in 1tuner)
1.
2.
3.
4.
Connect the monitor TV to the VHFAJHF antenna output
terminal.
Connect the VHF or UHF antenna to the VHFIUHF antenna
input terminal.
Receive the middle electrical field (70 dBp -90 dB~) of the
VHF or UHF channel, and slowly turn the VR (RF AGC)
from the point where snow-noise is present to the point
where it just disappears from the monitor TV.
Confirm by monitor TV that there is no beat and saturation
(S/N is best point) when receiving any TV channel.
2-5. CHECKING THE RF CHANNEL
If the TV and VCR are connected by an aerial output cable which has poor shielding characteristics, turn off the RF converter of
the VCR and use the VCR with an AV cable. To turn the RF converter off, input “00” when setting the RF (when “RF” is
displayed) during VCR pre-setting
3. TEST POINTS FOR TAPE PATH ADJUSTMENT
Test points TP182 (ENV) and TPI 83 (SW-P) for tape path adjustment are shown in figure below.
For adjustment, refer to the separate volume “V95 IMechanism Manual” (MM531 433) and “V95 II Mechanism Manual” (MS531 500).
P66300D TP163 TP182
(SW-P) (ENV.)
~/
-m
●m
D
F—
VP-1 PWB Assembly Fig. 3-1
–13–

4. PARTS LIST
MECHANISM PARTS
LOCATIONPARTSNO. tW3WT10N
MECHANISM PARTS 1
11000
21000
22000
30000
40000
50000
0099
0100
0300
040B
040C
040D
0800
0900
1000
1100
6073
6102
6070
10120
10140
10150
OR
10400
20100
OR
20200
OR
...
6131724792
6450157875
6450157868
6130814036
4120365001
4120364905
6131520578
6131520738
6131520660
6131520417
6131520707
6131520424
6131522794
6131522800
6131519480
6131519299
4120488205
6131516618
4110217907
4071621102
4071628705
4070430101
4071658108
4120526204
6131690974
6131605503
6131604193
6131681514
ASSY,CYLINDER,4H4F
MOTOR, ROTOR,CYL DC 2W
MOTOR, STATOR,CYL DC 2W
SPACER, MOTOR
SPECIAL SCREW 23X6
SPECIAL SCREW 2.3X1O
COMPL,CASSEllE MECHANISM
STAND,L
FRAME, UNDER
SPRING, LID OPENER
LEVER, RELEASE
SPRING,TRAY LOCK
GEAR,LOCK
GEAR, PINION
LEVER,DOOR OPENER
HOLDER,GEAR
SPECIAL SCREW-2.6X6
PAD
SCR S-TPG BIN 4X12
LED LN59L(D8003)
PHOTO DIODE PN263L-(NC)
(D8001 ,D8002) S,T SENSOFi
PHOTO DIODE 0N2170-R(PC801)
PHOTO COUPLE SG-105F(PC801)
SPECIAL SCREW-2.6X5.5
REEL, SUPPLY
ASSY,REEL SUPPLY
ASSY,REELTAKE UP
ASSY;REEL TAKE UP
11000
LOCATION PA8TSt@.
20210
OR
OR
20300
OR
20310
20400
20410
20600
20700
30300
30400
30500
30600
30700
30800
30900
31100
31700
31800
40100
40200
40300
50100
50110
50200
50210
5050A
5050B
5050C
5060A
4120158900
4120158504
4120215306
6131750661
6131716896
4120487505
6131519701
4120454606
6131522749
6131522756
6131603356
6131520295
6131519411
6131520318
6131606166
6131592193
6131636996
6131520189
6131518490
6131520356
6131518759
6131605282
6131520271
6450176432
4120469707
6131768406
4120523500
6131647237
6130220233
4120484504
6131647251
E?l
w
DESCMPTiON
SPECIAL WASHER 3,1X6X0.4
SPECIAL WASHER 3.1 X6X0.5
SPECIAL WASHER 3.IX6X0.3
COMPL,MOUNTING CLUTCH
COMPL,MOUNTING CLUTCH
SPECIAL SCREW-2.6X4
PULLEY,REEL
SPECIAL WASHER 2.4X6X0.25
GEAR,REEL S
GEAR,REEL T
ASSY,BRAKE SOFTT
SPRING,SO~T
LEVER,SOFT S
SPRING,SOFT S
ASSY,BRAKE,S
ASSY,BRAKE T
SPRING, BRAKE
SLIDE,ACT BRAKE T
ASSY,BRAKE CAPSTAN
SPRING,BRAKE CAPSTAN
“1““”
ASSY,LEVER,BT
ASSY.BRAKE,BAND
SPRING,BT
HEAD, ERASE FULL
SPECIAL SCREW-2.6X1O
ASSY,HEAD R/P ACE
SPECIAL SCREW 2.6X12
ASSY,MOUNTING,INCLINE S
ASSY,GUIDE,ROLLER
SPECIAL SCREW-2X3
ASSY,MOUNTING,INCLINE T
$!iiF
--30000
\22000
50000+ 50000 /“
,/’ B
.
21000+ /
2
‘k //’’’””’ /
20700
40000 ‘,/’ 20400
.1
10400~ N.S.P. :Not available as service parts.
Emmmmzm MECHANISM-PART 1
–14-

LOCATION
5060B
5060C
50700
50800
50900
51000
OR
51010
51100
51110
6090A
OR
6090B
6090C
60910
61000
61100
701OA
OR
7010B
7010C
70200
70300
70400
70410
801OA
801OB
PARTSNo.
6130220233
4120484504
6131644762
6131520387
4120488908
6131736153
6131612365
4120334106
6131607057
4120491700
6131519152
6131604636
6131519114
6131520226
4120502802
6131519398
6131523692
6131518803
6131751194
6131710221
6131520233
6131563841
6131520677
6131520714
4120491106
6131719606
6131719439
DESCRIPTION
ASSY.GUIDE.ROLLER
-—, .
SPECIAL SCREW-2X3
ASSY,LEVER,LOAD
SPRING, LEVER LGUIDE
SPECIAL NUT-3X3
ASSY,LEVER,ACT LGUIDE
ASSY,LEVER,ACT LGUIDE
WASHER SLIT 2.6X5X0.50
MOUNTING, CATCHER
SPECIAL SCREW-2 .6XI0
GEAR,RACK FRONT
GEAR,RACK FRONT
GEAR,RACK START
SPRING,RACK FRONT
SPECIAL SCREW-2.6X6
LEVER,EP SW
SPRING,EP SW
ASSY,LEVER,PINCH ROLLER
ASSY,LEVER,PINCH ROLLER
MOUNTING,LIFT PINCH
SPRING, PINCH ROLLER
CAM,LIFT PINCH
GEAR,CAM PINCH
MOUNTING, OPENER
SPECIAL SCREW-2.6X1 6
LEVER, CLEANER
ASSY,MOUNTING CLEANER
MECHANISM PARTS 2
10110 6131739451 COMPL PWB,MC-I
10130 6450071560 SWITCH, MODE(S8001)
10160 4120487505 SPECIAL SCREW-2.6X4
10200 4120468304 SPECIAL SCREW-2.6X8
LOCATK)N
10700
10720
10800
10810
20500
20510
20800
31000
31200
31300
31400
31500
31600
40400
5030A
5030B
5030C
5040A
5040B
5040C
60100
60200
60300
60400
60500
60600
60610
60700
60800
60810
70500
OR
70510
PARTSW.
6131675926
4120488007
6131658523
4120468007
6131604186
4111091605
6131519039
6131520165
6131590991
6131590847
6131520332
6131519459
6131520349
6131537583
6131522763
6131520370
6131603691
6131522770
6131520363
6131603707
6450034305
6131518599
6131519107
6131519138
6131603790
6131564008
4120546806
6131599017
6131598997
4120488007
6450209123
6450081897
4120487604
DESCRIPTION
MOUNTING CAPSTAN
SPECIAL SCREW-2.6X6
ASSY,EARTH CYL
SPECIAL SCREW-2.6X6
ASSY,GEAR,FRICTION
WASHER Y2.6X6X0.25
BELT,REEL
SLIDE.ACT BRAKES
LEVEi,CONTROL BRAKE
COMPL,LEVER,ACT BRAKE
SPRING, RETURN BRAKE
LEVER,CHANGE CLUTCH
SPRING,CHANGE CLUTCH
ASSY,LEVER SPRING BT
GEAR,LOAD S
SPRING,LOAD S
ASSY,LEVER,LOAD S
GEAR,LOAD T
SPRING,LOAD T
ASSY,LEVER,LOAD T
ASSY,MOTOR LOADING
COMPL,GEAR,WORM
DAMPER
GEAR, WHEEL 1
GEAR,WHEEL2
CAM,MAIN
SPECIAL WASHER 3.6X0.5
SLIDE,CRESCENT
MOUNTING,CRESCENT
SPECIALSCREW-2.6X6
MOTOR,CAPSTANDC 3W
MOTOR,CAPSTANDC 3W
SPECIAL SCREW-2.6X6
,0800.QQ.70500 ‘:M
60 A
B
MECHANISM-PART%
–15 –
.
MA4/U4 M2

LOCATION PARTSNO.
ACCESSORIES
6450254819
6131737013
6131784147
6450209390
OR 6131325975
OR 6450210464
OR 6450251375
A.645 0122606
OR A645 0027642
REMOCON,INFRARED, WITH COVER BATTERY
COVER BAllERY,FOR REMOCON
INSTRUCTION MANUAL
CABLE,ANT PAL
CORD
CABLE,ANTPAL
CABLE,ANTPAL
CORD,POWER
CORD,POWER
PACKING MATERIALS
6131786967 CARTONCASE,NEWZEALAND ONLY
6131783300 CARTONCASE,AUSTRALIA ONLY
6131735491 CUSHION,FRONT
6131735507 CUSHION,BACK
6130991768 POLYECOVER,INNER-K
Undesignated numeral shows
Location No.:CH-
N. S. P.: Not available as service parts
9+22
Mechani
2
12 ---11
Qd II
/
LDCATIONPARTSNO. lXSCRIPTK)N
CABINET &CHASSIS PARTS
CH-I 4111370007
CH-2 4110217907
CH-3 6131783829
CH-4 4120525108
CH-5 4120289406
CH-6 6131730632
CH-7 6131602885
CH-8 6131773165
CH-10 6131785151
CH-10 6131783751
CH-I 16450190070
CH-12 6131769892
CH-12 6131693777
CH-14 6131741522
CH-15 6131783287
CH-15 6131786929
CH-16 6131530478
CH-17 6131769328
CH-19 6131769335
CH-20 6131211001
CH-21 6131674059
CH-22 4110011901
SCRL-TPGBIN3XI0
SCR S-TPG BIN 4X12
COMPL PWB,VP-I
SPECIAL SCREW-2.6X12
SPECIAL SCREW
COVERTOP
HOLDER
TERMINAL
COMPLPWB,CP-I-A, NEWZEALAND ONLY
COMPLPWB,CP-I-A,AUSTRALIA ONLY
TUNER,RFflU/lF
COMPLPWB,TN-3,AUSTRALIA ONLY
COMPLPWB,TN-5, NEWZEALAND ONLY
ASSY,CABINETFRONT
DOOiCASSETTE, AUSTRALIA ONLY
DOORCASSEllE, NEWZEALAND ONLY
SPRING
COMPLPWB,TM-l
COMPLPWB,TB-2
STAND, FELT, STAND(FRONT)
COMPL,COVER BOTTOM
SCR S-TPG BIN 3X6
–16-

ELECTRICAL PARTS
Note:
1. Materials of Capacitors and Resistors are abbreviated as follows ;
Resistors Capacitors
MT-FILM Metal lized Film Resistor MT- POLYEST Metal lized Polyester Capacitor
MT-GLAZE Metal lized Glaze Resistor MT-COMPO Metal lized Composite Capacitor
OXIDE-MT Oxide Metal lized Film Resistor TA-SOLD Tantalum Solid Capacitor
AL-SOLID Aluminum Solid Capacitor
NP-ELECT Non-Polarized Electrolytic Capacitor
OS-SOLID Aluminum Solid Capacitors with Organic
Semiconductive Electrolytic Capacitor
DL-ELECT Double Layered Electrolytic Capacitor
2. Tolerance of Capacitor (lOp Fover) and Resistor are noted with follow symbol es.
F,.,., . .. . ...1% G............2% J,.,...,.,.,.5% K.. . . .. . . .. ..1O%
M.,.,., ....20% N,., .......30 °/0
3, Capacitors U:KF P:pF
4, Inductors UH:p HMH :mH
5. N,S, P. :Not available as service parts,
LOCATIONPARTSNO. DESCRIPTION
COMPL PWB,CP-1-A
6131785151 NEWZEALANDONLY
6131783751 AUSTRALIAONLY
CN301
OR
CN303
CN351
CN352
CN501
Q1OO2
QIO04
OR
Q1OO5
OR
QIO07
OR
QIIO1
OR
Q1102
OR
Q1301
Q1304
OR
QI 402
:!021
OR
:;022
OR
Q2023
OR
OR
Q2024
OR
OR
Q2025
OR
OR
Q2031
Q2302
OR
Q2351
Q2352
Q2353
OR
Q3301
Q3302
Q3503
Q3504
(CONNECTORS)
6450054808 SOCKET,35P (NS.P)
6450094408 SOCKET,FFC 3WP(~jS.P)
6450078422 PLUG,12P
6450078927 PLUG,6P (NS.P)
6450081842 PLUG,8P
A6450005411 (NS.P)
SOCKET, INLET AC (N.S.P)
(SEMICONDUCTORS)
4050356100 TR 2SC2413K-Q
4050144509 TR2SC2412K-R
4050144608 TR 2SC2412K-S
4050144509 TR 2SC2412K-R
4050144608 TR 2SC2412K-S
4050020308 TR 2SAI 037K-R
4050020407 TR 2SAI037K-S
4050020308 TR 2SA1037K-R
4050020407 TR 2SAI037K-S
4050144509 TR 2SC2412K-R
4050144608 TR 2SC2412K-S
4050061806 TR 2SA933S-R
4050020308 TR 2SA1037K-R
4050020407 TR 2SAI037K-S
4050020308 TR 2SAI037K-R
4050020407 TR 2SAI037K-S
4050180002 TR 2SC3331-S
4050180101 TR 2SC3331-T
4050180200 TR 2SC3331-U
4050250200 TR 2SD734-G
4050249907 TR 2SD734-F
4050035609 TR2SA1318-S
4050035708 TR 2SA131 8-T
4050035807 TR2SA131 8-U
4050180002 TR 2SC3331-S
4050180101 TR 2SC3331-T
4050180200 TR 2SC3331-U
4050180002 TR 2SC3331-S
4050180101 TR 2SC3331-T
4050180200 TR 2SC3331 -U
4050293504 TR DTC144EK
4050066702 TR 2SA984-F
4050067204 TR 2SA984K-F
4050000508 TR DTAI 14ES
4050293504 TR DTC144EK
4050180101 TR 2SC3331-T
4050180200 TR 2SC3331 -U
4050005305 TRDTC143TK, NEWZEAlAND ONLY
4050002007 TRDTA144EK, NEWZEALAND ONLY
4050293504 TR DTC144EK
4050293504 TR DTC144EK
z--. ,---
.........+6u YO’--z YO-Y0
LOCAllON PARTSNO. OESCRfPllON
—Q3553
OR
Q3554
Q3581
Q5001
Q5002
OR
Q5003
OR
Q5004
%01
OR
Q5102
OR
Q5103
:;
OR
Q5104
OR
Q5105
OR
OR
%
Q5131
::132
Q5133
Q5134
OR
OR
OR
OR
Iclol
ICI02
IC141
IC231
OR
IC301
IC302
IC303
OR
IC304
OR
OR
OR
IC351
OR
IC511
4050144509 TR 2SC2412K-R
4050144608
4050293504
4050293504
4051260208
4050137006
4050137303
4050066702
4050067204
405 Ot37006
4050137303
4050892103
4050892202
4050892103
4050892202
4050136801
4050137006
4050137204
4050137303
4050892103
4050892202
4050998508
4050118401
4050930607
4050998607
4050118500
4050892103
4050892202
4050000409
4050002908
4050998508
4050118401
4050930607
4050998607
4050118500
(INTEGRATED
4102731909
4093724508
4102555307
4094060100
4093922201
4102995103
4093142005
4093130903
4092434101
4101773702
4093486901
4101726906
4101895800
4093488103
4093486604
4091802307
TR 2SC2412K-S
TR DTC144EK
TR DTC144EK
TR 2SK1460LS
TR 2SC2274-F
TR 2SC2274K-F
TFl 2SA984-F
TR 2SA984K-F
TR 2SC2274-F
TR 2SC2274K-F
TR 2SC4483-S
TR 2SC4483-T
TR 2SC4483-S
TR 2SC4483-T
TR 2SC2274-E
TR 2SC2274-F
TR 2SC2274K-E
TR 2SC2274K-F
TR 2SC4483-S
TR 2SC4483-T
TR 2SC4640S
TR2SC1740S-Q
TR KSC2785-Y
TR 2SC4640T
TR 2SC1740S-R
TR 2SC4483-S
TR 2SC4483-T
TR DTAI 14EK
TRDTC114EK
TR 2SC4640S
TR2SC1740S-Q
TR KSC2785-Y
TR 2SC4640T
TR 2SC1740S-R
ICIRCUITS)
[c lA71511ML-MPB
IC LC89977M
IC LC74783M-9095
IC BH7801 BK
IC BH7801AK
IC LC866852A-5F78
IC LB1643
IC MN1381-L
IC MN1380-L
IC AT24C04-IOPC
Ic XL24C04P
Ic X24C04PC7346
IC 24LC04B/P
IC XLU2899K
IC BU2899K
Ic UPC1093J
–17 –

LWAIKIN
DIO05
D1301
D1302
D1341
DI 342
D2301
D3001
D3102
D3104
D3105
D3107
D3111
D3117
D3118
D3120
D3122
D3124
D3401
D3502
D3505
D3506
D5001
OR
D5003
D5004
D5006
D501O
Pmllsrw
(DIODES)
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4070124406
4071000006
4070124406
4071006602
4071006602
4071976509
4071045304
4070782705
4070782705
4070782705
4070916704
mwmr IIUN
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
DIODE 1SS133
ZENER DIODE MTZJ33C
DIODE 1SS133
DIODE 1SS291
DIODE 1SS291
DIODE DBI 55G-S
DIODE S1WB(A)60
DIODE 1SS244
DIODE 1SS244
DIODE 1SS244
DIODE APOIC
D5013 A4071695608 PHOTO COUPLE PC123U2
D5101
OR
OR
D5102
D5103
D5104
D5105
D5107
D5108
D5109
D5I1O
D5111
D5112
OR
D5113
OR
Xlool
OR
OR
OR
X3001
OR
X3002
OR
VR351
OR
OR
L1002
OR
L1003
OR
L1006
OR
L1007
OR
LIIO1
OR
LI102
L1401
OR
LI 402
OR
L1404
OR
L2021
L2021
4071695707 DIODE RL2Z-LF-C4
4071982609 DIODE SF34
4071609308 DIODE ERB93-02L3
4071982500 DIODE SF24
4070782705 DIODE 1SS244
4070782705 DIODE 1SS244
4071982401 DIODE SFT14
4070638903 ZENER DIODE MTZJ5.6C
4070638903 ZENER DIODE MTZJ5.6C
4070638903 ZENER DIODE MTZJ5.6C
4070996607 ZENER DIODE MTZJ12B
4070995501 ZENER DIODE MTZJ6.2C
4070049709 DIODE DSK1OC
4070058701 DIODE ERA1 5-02
4070049709 DIODE DSK1OC
4070058701 DIODE ERA1 5-02
(CRYSTAL DEVICES)
6450148378 OSC,CRYSTAL 4.433619MHZ
6450024436 OSC,CRYSTAL 4.433619MHZ
6450006029 OSC,CRYSTAL 4.433619MHZ
6450006012 OSC,CRYSTAL 4.433619MHZ
6450078460 OSC,CERAMIC 8.500 MHZ
6450088360 OSC,CERAMIC 8.500 MHZ
6450041938 OSC,CRYSTAL 32.768KHZ
6131090972 OSC,CRYSTAL 32KHZ
(VARIABLE RESISTORS)
6450035166 VR,SEMI,220K N
6450035593 VR,SEMI,220K N
6450065538 VR,SEMI,220K N
(INDUCTORS)
6450014611 INDUCTOR 120U J
6450037948 INDUCTOR,120U J
6450021510 INDUCTOR 68U J
6450038228 INDUCTOR,68U J
6450014642 INDUCTOR 22U J
6450038013 INDUCTOR,22U J
6450021411 INDUCTOR IOU J
6450037894 INDUCTOR, IOU J
6450087400 CORE,BEAD
6450250644 INDUCTOR,O.75UH
6450093791 CORE,BEAD
6450015472 INDUCTOR 33U J
6450038105 INDUCTOR,33U J
6450021497 INDUCTOR 56U J
6450038181 INDUCTOR,56U J
6450021442 INDUCTOR,18U J
6450037986 INDuCTOR,18U J
6450036934 INDUCTOR,IOOU J
6450037634 INDUCTOR,1OOU J
LCCATlON PARTStO. DESCRIPTION
L2022 6450207396 INDUCTOR,180U K
L2373 6450036934 INDUCTOR,IOOU J
OR 6450037634 INDUCTOR,1OOU J
L3001 6450093791 CORE,BEAD
L3003 6450093791 CORE,BEAD
L3301 6450014550 INDUCTOR 10U K
OR 6450037900 INDUCTOR, IOU K
L3304 6450063886 INDUCTOR,l UK, AUSTRALIA ONLY
OR 6450053856 INDUCTOR,l UM, AUSTRALIA ONLY
L3305 6450015441 INDUCTOR,2.2U K, NEWZEALAND ONLY
OR 6450053887 INDUCTOR,2.2U M, NEWZEALAND ONLY
L5001 A6450135620 LINE FILTER
L501O 6450063602 INDUCTOR, I.l UH
OR 6450243417 INDUCTOR,2,0UH
L5011 6450093791 CORE,BEAD
L5101 6450063602 INDUCTOR,l.l UH
OR 6450243417 INDUCTOR,2.OUH
L5102 6450063602 INDUCTOR, I.IUH
OR 6450243417 INDUCTOR,2,0UH
L5109 6450093791 CORE,BEAD
(TRANSFORMERS)
T2001 6450183515 TRANS,0SC,70KHZ
T2351 6450208973 TRANS,0SC,70KHZ
T5001 A6450208676 TRANS. POWER, PULSE
Clool
cl 002
cl 003
cl 004
cl 005
Cl 006
cl 007
cl 009
Clolo
Cloll
CI012
CI013
CIO14
C1OI5
C1OI6
CIO17
C1OI8
CIO19
C1021
cl 022
Cl 023
Cl 024
Cl 025
Cl 026
C1027
C1028
CI029
CI030
CI031
CI032
C1033
CI038
CI040
CI041
cl 043
Cl 046
C1047
C1048
cl 050
Cl 052
Cllol
C1102
C1103
C1104
CII05
C1106
CI107
CII08
CII09
C1301
cl 303
Cl 352
(CAPACITORS)
4031918709
4031892405
4031354002
4030680409
4031637907
4030680409
4031918709
4031918709
4030149302
4030234503
4030200508
4031506500
4030695601
4030228304
4030011906
4030011906
4031303109
4031918709
4031303109
4031096308
4031303109
4031925905
4030695601
4031918709
4030721607
4031918709
4031637907
4030680409
4030695601
4031918709
4030143409
4030101102
4031892405
4030200409
4030862805
4030013306
4030262803
4030126907
4030126907
4030262803
4031918709
4031637907
4030680409
4030695601
4030695601
4030695601
4030695601
4031925905
4030680409
4031354101
4030680409
4031918709
ELECT 1UM50V
ELECT 10UM 16V
ELECT 47U M6,3V
CERAMIC 0.1 UZ25V
ELECT 47U M6.3V
CERAMIC 0.1 UZ25V
ELECT 1UM50V
ELECT 1UM50V
CERAMIC 180P J50V
CERAMIC 330P J50V
CERAMIC 27P J50V
ELECT 22U M16V
CERAMIC 0.01 U K 50V
CERAMIC 33P J50V
CERAMIC 0.01 UM16V
CERAMIC 0.01 UM16V
CERAMIC 0,047U K50V
ELECT1 UM50V
CERAMIC 0.047U K50V
ELECT1 UM50V
CERAMIC 0.047U K50V
CERAMIC 0.1 U K 25V
CERAMtC 0.01 U K 50V
ELECT 1UM50V
CERAMIC 0.022U K50V
ELECT 1UM50V
ELECT 47U M6.3V
CERAMIC 0.1 UZ25V
CERAMIC 0.01 U K 50V
ELECT 1UM50V
CERAMIC 18P J50V
CERAMIC 1000P J50V
ELECT IOU M16V
CERAMIC 27P J50V
NP-ELECT 1UM50V
CERAMIC 1200P M16V
CERAMIC 47P J50V
CERAMIC 15P J50V
CERAMIC 15P J50V
CERAMIC 47P J50V
ELECT 1UM50V
ELECT 47U M6.3V
CERAMIC 0.1 UZ25V
CERAMIC 0.01 U K 50V
CERAMIC 0.01 U K 50V
CERAMIC 0.01 U K 50V
CERAMIC 0.01 U K 50V
CERAMIC 0.1 U K 25V
CERAMIC 0.1 UZ25V
ELECT 470U M6.3V
CERAMIC 0.1 UZ25V
ELECT 1UM50V
–18 -

LOCATIONPARTSNO. DESCIWllON
C1353 4031096308 ELECT1UM50V
C1401
cl 403
cl 404
cl 405
Cl 406
cl 407
CI41O
C1411
C1412
C1414
C2001
C2002
C2003
C2004
C2005
C2006
C2007
C2008
C2009
C201O
C2011
C2012
C2013
C2016
C2017
C2018
C2021
C2022
C2023
C2024
C2025
C2026
C2027
C2301
C2302
C2303
C2304
C2305
C2306
C2307
C2308
C2309
C231 O
C2311
C2312
C2315
C2316
C2321
C2323
C2324
C2325
C2326
C2327
C2332
C2351
C2352
C2353
C2354
C2361
C2362
C2372
C3001
C3002
C3004
C3005
C3008
C3009
C3011
C3012
C3014
C3015
C3016
C3019
C3022
C3034
C3037
4030228205
4031096308
4030699500
4031354002
4030180503
4030180503
4030095807
4030705508
4031096308
4030143508
CERAMIC 33P J50V
ELECT 1UM50V
CERAMIC O.OIU Z50V
ELECT 47U M6.3V
CERAMIC 22P J50V
CERAMIC 22P J50V
CERAMIC 100P J50V
CERAMIC 1200P K50V
ELECT 1UM50V
CERAMIC 18P J50V
4031918709 ELECT 1UM50V
4030691702 CERAMIC
4030695601
4031892405
4031677002
4030680409
4031677002
4030680409
4031598109
4031676500
4031676500
4030680409
4031892405
4031638409
4030750706
4030695601
4030754803
4030705508
4030750706
4030750706
4031937809
4030813302
4030680409
4031892405
4031892405
4030721607
4030721607
4030739107
4030739107
4031937809
4031937809
4030708806
4030708806
4031391502
4031391502
4030187502
4030187502
4031677002
4031937809
4031638409
4030721607
4030011906
4031391809
4031937809
4031349602
4030695601
4030695601
4030817409
4030690309
4030690309
4030718102
4030180503
4030125900
4030695601
4030695601
4031506500
4030695601
4030680409
4030695601
4031354101
4030680409
4030695601
4030680409
4033054801
4030695601
4030283402
CERAMIC
ELECT
ELECT
CERAMIC
ELECT
CERAMIC
ELECT
ELECT
ELECT
CERAMIC
ELECT
ELECT
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
ELECT
POLYPRO
CERAMIC
ELECT
ELECT
CERAMIC
CERAMIC
CERAMIC
CERAMIC
ELECT
ELECT
CERAMIC
CERAMIC
ELECT
ELECT
CERAMIC
CERAMIC
ELECT
ELECT
ELECT
CERAMIC
CERAMIC
ELECT
ELECT
ELECT
CERAMIC
CERAMIC
POLYPRO
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
ELECT
CERAMIC
CERAMIC
CERAMIC
ELECT
CERAMIC
CERAMIC
CERAMIC
DL-ELECT
CERAMIC
CERAMIC
1000P K50V
0.01 U K 50V
IOUM 16V
4.7U M50V
O.l UZ 25V
4.7U M50V
O.IUZ 25V
IOOU M6.3V
33U M6.3V
33U M6.3V
O.l UZ 25V”
10UM 16V
47U M16V
6800P K50V
0.01 U K 50V
820P K50V
1200P K50V
6800P K50V
6800P K50V
100UM 16V
0.022U JIOOV
O.lU Z25V
10UM 16V
10UM 16V
0.022U K50V
0.022U K50V
4700P K50V
4700P K50V
IOOUM 16V
IOOUM 16V
1500P K50V
1500P K50V
10UM 16V
IOUM 16V
220P J50V
220P J50V
4.7U M50V
100UM 16V
47U M16V
0.022U K50V
O.OIU M16V
47U M16V
100UM 16V
47U M16V
O.OIU K50V
0.01 U K 50V
0.033U J100V
1000P J50V
1000P J50V
2200P K50V
22P J50V
15P J50V
0.01 U K 50V
0.01 U K 50V
22U M16V
0.01 U K 50V
O.IU Z25V
O.OIU K50V
470U M6.3V
O.IU Z25V, AUSTRALIA ONLY
0.01 U K 50V
0,1 UZ 25V
O.l F Z 5.5V
0.01 U K 50V, NEWZEAL4ND ONLY
56P J50V
LOCAllON PARTStIKI.
C3040 4030095807
C3041 4030095807
C3042 4030095807
C3043 4030095807
C3086 4030011609
C3301 4031079905
C3302 4031079905
C3302 4031348100
C3303 4030247206
C3307 4030680409
C3314 4031892405
C3315 4030683608
C3316 4031677002
C3318 4030115000
C3320 4030307009
C3324 4031219509
C3325 4030680409
C3404 4031938905
C3501 4030709803
C3502 4030750706
C3503 4030709803
C3504 4032288207
C3505 4032288207
C3506 4030750706
C3507 4031506500
C3508 4031506500
C3509 4031637907
C3511 4030716504
C3512 4030569704
C3513 4031196701
C3514 4031849805
C3515 4030630206
C3516 4030718102
C3517 4030708806
C3522 4030691207
C3523 4031392707
C3524 4030695601
C3525 4031392608
C3526 4030637205
C3536 4031937601
C3540 4030095708
C3551 4031686202
C3552 4030284102
C3553 4031918709
C3554 4030133004
C3555 4030695601
C3556 4030691702
C3558 4031676500
C3561 4030589306
C3562 4031385600
C3570 4030702606
C3571 4030702606
C3581 4031849805
C5001 ~4040554905
C5002 A4040554905
C5005 ~4040742104
C5007 ~4040742104
C501O 4032490204
C5011 4033011101
C5012 4030762402
C5013 4032558409
C5015 4031925905
C5017 4030247107
C5020 4032558508
C5021 4030760507
C5025 4032558409
C5101 4033140207
C5102 4031353302
C5103 4033140108
C5104 4031255507
C5105 4033049302
C5106 4033011309
C5107 4033011507
C511 1 4031255606
C5112 4031892405
C5113 4031939001
C511 4 4031079905
DESCRIPTK)N
CERAMIC 100P J50V
CERAMIC 100P J50V
CERAMIC IOOP J50V
CERAMIC 100P J50V
CERAMIC 0.01 U K 16V, AUSTRALIA ONLY
ELECT 10UM 16V
ELECT 10U M16V, AUSTRALIA ONLY
ELECT 100U M6,3V, NEWZEALAND ONLY
CERAMIC 390P J50V
CERAMIC 0,1 UZ25V
ELECT 10UM 16V
CERAMIC 0.033U Z25V, NEWZEALAND ONLY
ELECT 4,7U M50V, NEWZEALAND ONLY
CERAMIC 120P J50V
CERAMIC 68P J50V
CERAMIC O.lU Z50V
CERAMIC 0.1 UZ25V
ELECT 22U M50V
CERAMIC 0,015U K50V
CERAMIC 6800P K50V
CERAMIC 0.015U K50V
ELECT 22U M16V
ELECT 22UM 16V
CERAMIC 6800P K50V
ELECT 22UM 16V
ELECT 22U M16V
ELECT 47U M6.3V
CERAMIC 220P K50V
POLYESTER 0.01 UJ50V
CERAMIC 0.068U K16V
MT-POLYEST 0,22U J50V
POLYESTER 6800P K50V
CERAMIC 2200P K50V
CERAMIC 1500P K50V
CERAMIC 1000P K50V
ELECT 1UM50V
CERAMIC 0,01 U K 50V
ELECT 0,47U M50V
POLYESTER 0.082U J50V
ELECT 220U M6.3V
CERAMIC 100P J50V
MT-POLYEST 0,33U J50V
CERAMIC 56P J50V
ELECT 1UM50V
CERAMIC 150P J50V
CERAMIC 0.01 U K 50V
CERAMIC 1000P K50V
ELECT 33U M6.3V
POLYESTER 0.018U J50V
POLYESTER 5600P J50V
CERAMIC 0.1 UZ50V
CERAMIC 0.1 UZ50V
MT-POLYEST 0.22U J50V
MT-POLYEST 0.068U M250V
MT-POLYEST 0.068U M250V
CERAMIC 1000P M250V
CERAMIC 1000P M250V
ELECT 47U M400V
ELECT 4.7U M50V
CERAMIC 3300P K500V
CERAMIC 39P JlK
CERAMIC 0.1 U K 25V
CERAMIC 390P J50V
CERAMIC 47P J 1K
CERAMIC 2200P K500V
CERAMIC 39P J 1K
ELECT 1000U M16V
ELECT 1000U M6.3V
ELECT 470U M16V
ELECT 1000U M16V
ELECT 47U M50V
ELECT 47U M35V
ELECT 220U M6.3V
ELECT 100UM 16V
ELECT 10U M16V
ELECT 3.3U M50V
ELECT 10UM 16V
–19 -

LOCATION PARTSMl. DESCRIPTION
C5115
C5116
C5117
C5118
C5123
C5124
C5135
RIOOI
RI 002
RI 003
RI 004
RIO05
RI 006
RIO1l
RI012
RIO14
R1OI5
RIO16
R1017
RI 024
R1025
R1028
RI 032
RI 040
R104I
R1042
RI 045
R1046
R1047
R1048
R1049
RIIO1
R1102
RI104
R1301
RI 303
RI 304
R1312
R1313
RI 352
RI 404
R1405
RI41O
R1412
R2001
R2002
R2003
R2004
R2005
R2006
R2007
R2008
R2009
R201O
R2011
R2017
R2021
R2022
R2023
R2024
R2025
R2026
R2027
R2028
R2029
R2030
R2031
R2301
R2302
R2303
R2303
R2304
R2304
R2305
4031357805
4031079905
4031357805
4031892405
4030756906
4031080000
4030573107
(RESISTORS)
4010375400
4010386406
4010379200
4010376704
4010386307
4010386307
4010375400
4010386505
4010379200
4010390403
4010377909
4010164707
4010375400
4010375004
4010380701
4010375400
4010375004
4010380701
4010375004
4010377008
4010375004
4010375004
4010375004
4010375004
4010380701
4010380701
4010152605
4010190904
4010226702
4010375004
4010380602
4010382002
4010375004
4010383603
4010380602
4010380602
4010123308
4010386406
4010376803
4010376803
4010383801
4010382002
4010387700
4010376803
4010386406
4010383900
4010383702
4010375608
4010387700
4010382200
4010379200
4010375400
4010386208
4010118809
4010380701
4010380701
4010379101
4010375608
4010380800
4010375004
4010201907
4010201907
4010383702
4010389209
4010383702
4010389209
4010379309
ELECT 3.3U M50V
ELECT 10UM 16V
ELECT 3,3U M50V
ELECT 10UM 16V
CERAMIC IOOP K500V
ELECT 0.22U M50V
POLYESTER O,IU K50V
MT-GIAZE 1KJA l/10W
MT-GIAZE 4.7K JA l/10W
MT-GLAZE 1.8K JA l/10W
MT-GLAZE 1,2K JA l/10W
MT-GLAZE 470 JA 1/1OW
MT-GLAZE 470 JA l/10W
MT-GLAZE 1KJA l/10W
MT-GLAZE 47K JA 1/1OW
MT-GL4ZE 1.8K JA 1/1OW
MT-GLAZE 8,2K JA l/10W
MT-GLAZE 1.5K JA 1/1OW
CARBON 22K JA l/4W
MT-GMZE 1KJA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 2,2K JA 1/1OW
MT-GLAZE 1KJA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 2.2K JA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 1.2M JA l/10W
MT-GIAZE 0.000 ZA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 2,2K JA 1/1OW
MT-GLAZE 2,2K JA 1/1OW
CARBON 1,8K JA l/4W
CARBON 390 JA l/4W
CARBON 75 JA l14W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 220 JA 1/1OW
MT-GLAZE 270 JA 1/1OW
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 3.3K JA 1/1OW
MT-GLAZE 220 JA l/10W
MT-GLAZE 220 JA l/10W
CARBON 10JA l/4W
MT-GLAZE 4.7K JA l/10W
MT-GLAZE 12K JA 1/1OW
MT-GLAZE 12K JA l/10W
MT-GIAZE 330K JA l/10W
MT-GLAZE 270 JA l/10W
MT-GL4ZE 5.6K JA l/10W
MT-GLAZE 12K JA l/10W
MT-GLAZE 4.7K JA l/10W
MT-GLAZE 3,3M JA 1/1OW
MT-GLAZE 33K JA 1/1OW
MT-GLAZE IOKJA 1/1OW
MT-GLAZE 5,6K JA 1/1OW
MT-GIAZE 27K JA 1/1OW
MT-GLAZE 1,8K JA 1/1OW
MT-GLAZE 1KJA l/10W
MT-GLAZE 47 JA 1/1OW
CARBON 1JA l/4W
MT-GLAZE 2.2K JA 1/1OW
MT-GLAZE 2.2K JA 1/1OW
MT-GLAZE 180 JA l/10W
MT-GLAZE IOKJA 1/1OW
MT-GIAZE 22K JA 1/1OW
MT-GLAZE 0.000 ZA l/10W
CARBON 4.7K JA l/4W
CARBON 4,7K JA l/4W
MT-GIAZE 33K JA l/10W, AUSTRALIA ONLY
MT-GLAZE 6.8K JA l/10W,
NEWZEALAND ONLY
MT-GIAZE 33K JA l/10W, AUSTRALIA ONLY
MT-GLAZE 6.8K JA l/10W,
NEWZEALAND ONLY
MT-GLAZE 18K JA l/10W, AUSTRALIA ONLY
LOCAllON PARTSNO.
R2305 4010387700
R2306 4010379309
R2306 4010387700
R2307 4010375400
R2308 4010375400
R2309 4010386406
R2310 4010386406
R2313 4010375004
R2314 4010375004
R2322 4010232703
R2323 4010382200
R2324 4010382200
R2325 4010144006
R2327 4010163700
R2329 4010381005
R2331 4010375004
R2332 4010375608
R2333 4010383702
R2334 4010379309
R2335 4010386406
R2336 4010144006
R2337 4010144006
R2351 4010181506
R2352 4010386208
R2353 4010378005
R2354 4010375103
R2355 4010380800
R2356 4010383702
R2361 4010125609
R2362 4010125609
R2379 4010385102
R2380 4010389209
R2381 4010375400
R2395 4010389506
R3001 A4020677402
R3004 4010377909
R3008 4010201907
R3009 4010231607
R3011 4010202805
R3013 4010386406
R3014 4010149001
R3015 4010149001
R3018 4010389209
R3019 4010379309
R3023 4010375400
R3024 4010375400
R3025 4010375400
R3026 4010375400
R3032 4010184804
R3036 4010163700
R3037 4010385300
R3047 4010379200
R3048 4010376704
R3049 4010382101
R3050 4010164707
R3051 4010164707
R3056 4010386505
R3057 4010163700
R3058 4010163700
R3059 4010126903
R3101 4010126903
R3102 4010126903
R3103 4010126903
R3104 4010126903
R3301 4010385003
R3302 4010377909
R3305 4010383603
R3306 4010390403
R3309 A4020782908
R331O 4010383504
R3311 4010385003
R3501 4010128006
R3502 4010375707
DESCRIPllON
MT-GLAZE 5.6K JA l/10W,
NEWZEALAND ONLY
MT-GLAZE 18K JA l/10W, AUSTRALIA ONLY
MT-GLAZE 5.6K JA l/10W:
NEWZEALAND ONLY
MT-GL4ZE IK JA l/10W
MT-GLAZE 1KJA l/10W
MT-GLAZE 4.7K JA l/10W
MT-GLAZE 4.7K JA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GLAZE 0.000 ZA l/10W
CARBON 8.2K JA l/4W
MT-GLAZE 27K JA l/10W
MT-GLAZE 27K JA l/10W
CARBON 1.5K JA l/4W
CARBON 2.2K JA l/4W
MT-GLAZE 2.2M JA l/10W
MT-GLAZE 0.000 ZA l/10W
MT-GIAZE 10K JA l/10W
MT-GIAZE 33K JA IHOW, NEWZEALAND ONLY
MT-GLAZE 18K JA l/10W, NEWZEA!AND ONLY
MT-GLAZE 4.7K JA l/10W
CARBON 1.5K JA l/4W
CARBON 1.5K JA l/4W
CARBON 33 JA l/4W
MT-GLAZE 47 JA l/10W
MT-GLAZE 15K JA 1/1OW
MT-GLAZE 10 JA l/10W
MT-GLAZE 22K JA l/10W
MT-GLAZE 33K JA l/10W
CARBON IKJA l/4W
CARBON lKJA l/4W
MT-GLAZE 3.9K JA l/10W
MT-GLAZE 6.8K JA l/10W
MT-GLAZE 1KJA l/10W
MT-GLAZE 75 JA l/10W
FUSIBLE RES 3.3 JA l/2W
MT-GIAZE 1.5K JA l/10W
CARBON 4.7K JA l/4W
CARBON 820 JA l/4W
CARBON 47K JA l/4W
MT-GLAZE 4.7K JA l/10W
CARBON 16K JA l/4W
CARBON 16K JA l/4W
MT-GLAZE 6.8K JA l/10W
MT-GLAZE 18K JA l/10W
MT-GLAZE 1KJA 1/1OW
MT-GLAZE 1KJA l/10W
MT-GIAZE 1KJA 1/1OW
MT-GLAZE 1KJA l/10W
CARBON 33K JA l/4W
CARBON 2.2K JA l/4W
MT-GLAZE 39K JA 1/1OW
MT-GLAZE 1.8K JA l/10W
MT-GLAZE 1.2K JA l/10W
MT-GIAZE 2,7K JA l/10W
CARBON 22K JA l/4W
CARBON 22K JA l/4W
MT-GLAZE 47K JA 1/1OW
CARBON 2.2K JA l/4W
CARBON 2.2K JA l/4W
CARBON 10K JA l/4W
CARBON IOK JA l/4W
CARBON 10K JA l/4W
CARBON 10K JA l/4W
CARBON 10K JA l/4W
MT-GLAZE 390 JA l/10W
MT-GLAZE 1.5K JA l/10W
MT-GLAZE 3.3K JA l/10W,
NEWZEALAND ONLY
MT-GIAZE 8.2K JA l/10W,
NEWZEALAND ONLY
FUSIBLE RES 680 GA l/4W
MT-GIAZE 330 JA l/10W
MT-GLAZE 390 JA l/10W
CARBON IOOK JA l/4W
MT-GLAZE IOOK JA l/10W
-20 –