SATO MB 200i User manual

MB200
MB200i iUltimate Performance & Mobility
Ultimate Performance & Mobility
Quick. Durable. Portable.
Light yet extremely
durable. Made of
polycarbonate materials
Lasting battery operation
due to newly adopted
battery cell technology
“Fastest” mobile
printer in the market
Optional LCD display with
802.11b wireless connectivity
www.satoamerica.com
FAST
Fast and low power
consuming CPU offers
instantaneous printing
DURABILITY
The poly-carbonate body
and modular design affords
light weight and toughness
PERFORMANCE
Adopts a high capacity battery
cell technology to extend
operation time
Printing Speed
4 inch/s

The Best
Performing Compact
General Specifications
MODEL MB200i
PRINTING SPECIFICATION
Print Method Direct Thermal
Print Resolution 203 dpi (8 dpmm)
Print Speed Max up to 4"/s (103 mm/s) at 16% printing coverage
Default Print Speed is 3"/s (75 mm/s)
Max. Print Area Width 1.89" (48 mm)
Length 6.3" (160 mm)
MEDIA SPECIFICATION
Sensor Type
Reflective Sensor (for use with pre-printed marks)
Adjustable See-Through Sensor (for die-cut label with gap)
Dispenser Sensor
Media Type Roll die-cut label with gap or pre-printed label, 2 Color direct thermal, Linerless media
Media Size
Width 1.1" - 2.2" (28 mm - 57.5 mm) includes backing liner
Length 0.63" - 6.4" (16 mm - 163 mm) includes backing liner
Thickness 0.003" - 0.007" (0.064 mm - 0.19 mm)
Outer Diameter 2.63" (67 mm)
Inner Diameter 0.75" (19 mm) for standard labels or
0.31" (8 mm) coreless for receipt paper
FONT / SYMBOLOGIES
Internal Fonts XS, XM, XB, XL, OCR-A, OCR-B
Barcode Symbologies Linear UPC-A/E, UCC/EAN-128, Interleaved 2 of 5, CODE 39, CODE 128, EAN-8/13,
CODE 93, RSS-14, POSTNET, NW-7
2-Dimensional Data Matrix, PDF417, Maxicode, Composite Symbology, QR Code
INTERFACE CHARACTERISTICS
Interface Options
RS232C, IrDA (Ver.1.2, Standard Protocol, BHT Protocol, IrCOMM (3-wire cooked),
IrOBEX (option)), Bluetooth Ver1.1, 802.11b/g Wireless LAN (Supports WEP 64/128bit,
WPA, WPA (PSK, 802.1x), and EAP)
OPERATING CHARACTERISTICS
Battery 7.4 V (2400mAH) Lithium Ion
Environment Operating 5º F – 122º F (-15º C – 50º C), 30%-80% RH, non-condensing
Storage -13º F – 140º F (-25º C – 60º C), 30%-90% RH, non-condensing
Regulatory Approvals FCC Class A, UL, CE, TÜV, GSA
Dimensions 3.5" (88 mm) L x 5.03" (128 mm) W x 2.9" (73 mm) H
Weight 0.9 lbs. (405 g) with battery installed
Drop Specification 6 ft. (1.83 m) - flat sides of printer to concrete
OPTIONAL ACCESSORIES
Battery Charger (Single and Multi-Battery Capabilities), Spare Battery, AC Adapter, Serial to PC Cable,
Weather-Resistant Carrying Case, Holster, Optional Swivel Belt, Optional Shoulder Strap
OPERATIONAL FEATURES
Firmware Features Auto Power Save. Printer enters sleep mode when idle for 5 seconds. Printer will power off
automatically when idle for another 5 minutes. (Programmable power off feature)
Self Diagnosis Tools Head Check, Battery Balance Check, Paper End, Head Open, Test Print,
MB200i has additional over charge/discharge protection
MB200i
*Specifications subject to change without notice
SATO America, Inc.
10350-A Nations Ford Road, Charlotte, NC 28273
Phone: [phone] Fax: [phone]
E-mail: [email protected] © 2007 SATO America, Inc. All rights reserved. Rev. 10/07