SCAN 5-2 User manual

SCAN 52/52-5
INSTRUCTIONS FOR
INSTALLATION AND USE
This manual is accompanied by a pamphlet
with General Instructions for Installation. Edition 08/05 - GB
MONTERINGSVEJLEDNING
med brugs- og fyringsanvisning
Indhold:
Generelle råd og anvisninger . . . . . . . . . .2-3
Reklamationsret
Type- og miljøgodkendelse
Udpakning
Tilbehør til din pejs
Montering af kakler og fedtsten
Kvalitetskontrol
Anmeldelsespligt
Skorstenstjek
Skorstensløsninger
Bærende underlag
Brændbar eller ikke brændbar væg
Gulvplade
Varmefordeling
Justerskrue
Typeskilt
Produktionsnr.
Servicepakke
Monteringsvejledning. . . . . . . . . . . . . . . . .4-7
Tilslutning til eksisterende/muret skorsten
Tilslutning topafgang til stålskorsten
Forbrændingsluft udefra
Brugs- og fyringsanvisning . . . . . . . . . . . 8-10
Vedligeholdelse af pejseovnen
Håndtering af brændsel
Optænding og fyring
Fejlsøgning . . . . . . . . . . . . . . . . . . . . . . . . 11
SCAN 3
BRUGSANVISNING
TildenneBrugsanvisninghørerogsåen
generelMonteringsvejledning.Udgave03.03-DK
MONTERINGSVEJLEDNING
medbrug
s-ogfyringsanvisning
Indhold:
Generellerådoganvisninger..........2-3
Reklamationsret
Type-ogmiljøgodkendelse
Udpakning
Tilbehørtildinpejs
Monteringafkaklerogfedtsten
Kvalitetskontrol
Anmeldelsespligt
Skorstenstjek
Skorstensløsninger
Bærendeunderlag
Brændbarellerikkebrændbarvæg
Gulvplade
Varmefordeling
Selvlukkendelåge
Justerskrue
Typeskilt
Produktionsnr.
Servicepakke
Monteringsvejledning.................4-7
Tilslutningtileksisterende/muretskorsten
Tilslutningtopafgangtilstålskorsten
Forbrændingsluftudefra
Brugs-ogfyringsanvisning...........8-10
Vedligeholdelseafpejseovnen
Håndteringafbrændsel
Optændingogfyring
Fejlsøgning........................11
Tildennemonteringsvejledninghørerogsåen
separatbrugsanvisningfordenenkeltepejs.
Udgave02/03-DK
Til dennemonteringsvejledning hørerogsåen
separatbrugsanvisning fordenenkelte pejs.
Udgave 02/03 - DK
Approved according to DIN 18891 and
EN 13240
Approved according to EN 13240
Krog Iversen & Co. A/S - DK-5492 Vissenbjerg

Clean combustion
The SCAN 52 uses the "CB technique" (Clean-Burn)
to ensure an optimally clean combustion. The extra
combustion air is preheated and led into the combu-
stion chamber close to the ceramic smoke deflector. Ceramic smoke deflectors
Lift up the lower ceramic smoke deflector, pull out the pins in
the lateral combustion chamber plates and remove the deflector.
The upper deflector is removed in the same way.
You have chosen a product from one of Europe's leading
manufacturers of wood-burning stoves. We are convinced that
your stove will be to your full satisfaction and give you many
hours of pleasure if you follow the advice and instructions of
this manual.
Please read this manual as well as the General Instructions
for Installation before beginning the installation.
Congratulations on your new SCAN stove!
3
5
4
1
2
1Ashtray. When you open the door in front of the
wood compartment, you have access to the ashtray,
which is placed below the combustion chamber.
Attention! Be careful when you empty ashes from
the stove. There may be embers left for up to 24
hours after the stove was last used.
2 Lid for ashtray. Under the ashtray you will find a lid
to put on top of the ashtray when you carry it out for
emptying.
3 Handle for shaking grate. The stove is equipped
with a shaking grate. When you activate the grate
handle, the ashes from the combustion chamber are
emptied into the ashtray.
4 Regulation for primary air. Push the air control rod
sideways. Left position is closed and right position
is open. The primary air is used when lighting and
refuelling the stove. It should always be closed dur-
ing continuous firing.
5 Regulation for combustion air. Push the air con-
trol rod sideways. Left position is closed and right
position is open. The air is used for combustion and
re-gulates the output of the stove.
SCAN 52/52-5
The ashtray, shaking grate, and primary air should
always be closed during continuous firing.
You can choose between several floor plates in different shapes and
dimensions for your stove. Furthermore, you can have a specially
made, shaped floor plate for the SCAN 52, which is to be placed in
front of the stove. Please contact your local authorities concerning the
security distances needed.

Accessories
For this model you can have the following accessories:
Handle
Pull out the handle to open.
Adjustment screws
The stove has two adjustment screws on the bottom
that can be used for levelling the stove.
Self-closing door (BA 1)
The door is prepared with a self-closing function at the fac-
tory. If you tighten the spring with the hexagon spanner, the
door will close automatically when you let go of it.
• Shaped floor plate (steel or glass)
• Connection piece for fresh-air intake (with firm base)
• Special elbow with wall sleeve and cover ring for SCAN 52 with
revolving base (see separate instructions)
• Special adaptor for steel chimney for SCAN 52 with revolving
base (see separate instructions)
You should read this manual as well as the General Instructions for Installation before beginning the installation.
SCAN 52/52-5
The stove (with firm base) can be prepared for an external
air supply where fresh air is let directly into the combustion
chamber (can also be done subsequently by the authorized
dealer).
Data for calculation of the chimney and adjustment of the air according to EN 13240:
Combustion
air
%
Primary air
%
Max. fuel
kg
Chimney
draught, min.
Pa.
Flue outlet
flow
g/s
Temperature of
flue outlet
behind flue collar
oC
Rated output
kW
Fuel consump-
tion
kg/h
Efficiency
%
75 0 1.9 15 5.2 164 5.9 1.6 87
SCAN 52 with revolving base (SCAN 52-5)
Mounting with elbow:
See separate instructions delivered with the stove.
Mounting with direct connection to steel chimney:
Should only be done in accordance with the instructions from an authorised SCAN
dealer. See separate instructions delivered with the stove.
The warranty is invalid if the above is not followed.

Warranty conditions
All SCAN wood-burning stoves and inserts are made of first-class mate-
rial and are subject to a strict quality control before they leave the factory.
However, if an error should occur, we back all SCAN wood-burning stoves
and inserts with an extensive, five-year limited warranty.
See also the General Instructions for Installation delivered with your
stove for more details.
Technical info
Rated output: 5,9 kW
Min./max.: 2 - 8 kW
Weight: 123 kg
Connection piece, diameter: int. 135 mm / ext. 148 mm
* To the middle of the rear outlet
** Height to the beginning of the flue pipe at top outlet
***Connection piece to fresh-air intake
Distances to flammable materials
(mm) SCAN 52 with firm base:
Production number
Write the production number of your
stove here so that you have it at hand
in case you need to contact us.
SCAN 52/52-5
992
642
211
844
947
448
202
***
**
*
SCAN 52-5 with revolving
base is 5 mm higher
Distances to flammable materials: SCAN 52-5 with revolving base:
Important:SCAN52-5with
revolving base: all distan-
ces to flammable materi-
als must be observed in
all the possible positions
of the stove.
Distance to furniture: 800 mm
300
300
800
800
800
100
Middle position Middle position
45o
45o
45o
45o