SCANGRIP AREA 10 CAS Parts list manual

Battery Replacement Guide
AREA Range
2021-06-02 By RU
1
Battery Replacement Guide
This guide covers the replacement of the internal battery for the following products:
•03.6103 –AREA 10 CAS
•03.6009 –AREA 10 SPS
Step 1
Remove the base by unscrewing the 8 screws.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
2
Step 2
Remove the top cover by unscrewing the 7 screws.
NB: Place the lamp on the table as shown in the picture. The top left screw (green circle) will get lost in a
void in the lamp cover otherwise.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
3
Step 3
Unplug the top cover from the printed circuit board.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
4
Step 4
Unplug the battery.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
5
Step 5
Unscrew the circuit board and unplug the flex cable.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
6
Step 6
Unscrew the battery cover.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
7
Step 7
Depending on the replacement battery, it might be necessary to replace the battery in the battery cover.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
8
Step 8
Mount the battery and cover.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
9
Step 9
Mount the circuit board and flex cable.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
10
Step 10
Connect the battery to the circuit board.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
11
Step 11
Connect the top cover wires.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
12
Step 12
Mount the top cover.
NB: As in Step 2, be carful when mounting the screw in the green circle.
NB: Make sure to use the long screws from Step 2.

Battery Replacement Guide
AREA Range
2021-06-02 By RU
13
Step 13
Mount the base.
NB: Note the orientation when mounting it.