SCANGRIP VEGA 1500 C+R Parts list manual

How to replace battery – SCANGRIP VEGA 1500 C+R
Item no. 03.5451
02.06.2021 by RU
First it is a good idea to check if the unit works with a different charger.
If the lamp has the same problem with a different charger, the battery should be replaced as described
below.
Remove all 11 screws on the back of the lamp.
Gently lift off the front bezel of the lamp.
Unscrew the 6 screws holding the PCB in the lamp.

How to replace battery – SCANGRIP VEGA 1500 C+R
Item no. 03.5451
02.06.2021 by RU
Gently flip the PCB to the left to reveal the battery and connector.
Remove the battery connector from the main board.
Unscrew the 2 screws securing the battery in the lamp.

How to replace battery – SCANGRIP VEGA 1500 C+R
Item no. 03.5451
02.06.2021 by RU
Reinsert the battery connector on the main board.
Reposition the LED PCB in the lamp and tighten the 6 screws.
Place the front bezel face-down on a table and ensure, that
the inner frame is correct alligned on the studs.

How to replace battery – SCANGRIP VEGA 1500 C+R
Item no. 03.5451
02.06.2021 by RU
Place the backside of the lamp on top of the bezel.
Reinsert and the tighten the 11 screws.
Insert the charger and ensure, that the battery is charging