Schlage S-5600 User manual

Name and function of each part
1. Front Ass`y
Name Product speci󽗉cation Remark
① Front Ass`y 84mm(W) X 260mm(H) X 21mm(D)
Including rubber
pad
②
Back Ass`y 82mm(W) X 242mm(H) X 34mm(D)
③ Back bracket 70mm(W)
X 119.5mm(H) X 6.6mm(D)
④ Strike 35mm(W) X 106mm(H) X 6.3mm(D)
⑤ Strike housing 21mm(W) X 106mm(H) X 19.5mm(D)
⑥ Mortise lock
105.4mm(W) X 110mm(H) X 25mm(D)
⑦ Card key ISO card, Tag key, Mobile tag key
⑧ Handle shaft 96mm(W) X 8mm(H) X 8mm(D)
⑨ Handle shaft clip 2 EA
⑩ Override key 3 EA
⑪ Battery 1.5V 'AA' Size LR6 Alkaline, 4EA(DC 6V)
⑫ Screws 1 SET
⑬ User manual Main User manual
⑭ Installation template
Using for making hole at the door
⑮ Communication pack
Communication pack
Optional
⑯ Remote key Remote key Optional
※ Installation condition Door thickness 35~50mm
󾘬
󾘥󾘥󾘥
It facilitates escape with a simple action of lever down.
󾘥󾘥󾘥󾘥󾘥
󾘬󾘥󾘥󾘥
The product can be installed in a left or right handed
configuration.
󾘥󾘥
If users do not open the door after unlocking the device it will
lock itself automatically.
󾘥
8 levels of volume.
󾘥󾘥󾘥
Door will not emit any sound when mute is activated.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥

Easy to check battery status with three step level indicator and
alarm when battery replacement is required.
󾘥󾘥
When the door is opened by force an alarm will sound.
󾘥󾘥󾘥
After multiple incorrect attempted entries an alarm will sound
and all the functions of the lock will be suspended for three
minutes. The alarm activated after three incorrect PIN/card
entries.
 󾘥󾘥
󾘩󾘥󾘫󾘥󾘥󾘫󾘥󾘥󾘪
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
Automatically deleting old PIN code or card key information when
registering new one.
󾘥󾘥󾘥
When you enter your home with other people, you may not
want to show PIN code to them. In this case, you may press
any numbers randomly without limitation and then enter your
PIN code at the end.
󾘥󾘥
When the door is closed, it will be locked automatically in auto
lock mode.
① ③②
⑬
⑭
Screws
User
manual
⑫
④ ⑤ ⑥
⑨
⑪⑩
⑧
Installation
template
Factory setting
Item Setting Status Ref.page
Auto/Manual lock mode [Auto-lock] 9
Beep sound level (1~8 level) 8 level 8
Factory setting PIN code 123456 -
USER MANUAL
Notice
Please read this manual before installation and
operation.
Safety precautions Product features
Product composition and components
Remote keyCommunication pack
Optional parts
⑮ ⑯
⑦
ISO
CARD
Tag
key
M
key

Can open the door by pushing down
it after unlocking with PIN code or
Card key
󾘥
Indicate operation status and
checking battery capacity
˙ Remaining battery 20%
˙ Remaining battery 50%
˙ Remaining battery 80%
󾘥
󾘥
Unlock the door with override
key manually
󾘥󾘥
󾘥󾘥
When battery does not operate,
product may be operated
and unlocked by contacting a
9V battery on terminal located
outside
󾘥󾘥󾘥
Touch the registered card key to
unlock the door
󾘥󾘥

󾘥󾘮󾘥󾘥
Indicate lock / unlock status
󾘥󾘥

When the battery is low, the
red light blinks. Please change
batteries
󾘥󾘥󾘥󾘥󾘥󾘥󾘭
Disassembling the door lock may damage the product. Damages to
the product caused by unauthorized persons may void the warranty.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘭
Please remove the batteries immediately from the product, if you
do not take this step immediately, the product may suffer severe
damage.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘭
If the product is exposed to water or liquids, please wipe the
moisture off with a soft cloth. If moisture or foreign materials
penetrate the product, remove the batteries immediately.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘮󾘭
If leakage is discovered, please wipe out with a dry cloth and replace
with new batteries. In case of exposure to leakage, wash affected
skin area with soap and water immediately.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘥󾘥󾘥󾘫󾘥󾘥󾘥󾘭
Such materials may damage the surface of the lock or cause a fire.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘥󾘥󾘥󾘥󾘫󾘥󾘥󾘥󾘥
󾘥󾘥󾘫󾘥󾘥󾘥󾘥󾘭
Do not use damaged batteries.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘥󾘥󾘥󾘫󾘥󾘥󾘥󾘥󾘥󾘫󾘥
󾘥󾘥󾘥󾘥󾘭󾘥
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘥󾘥󾘭
It may damage the product or cause a malfunction.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘭
It may damage the product or cause a malfunction.
󾘥󾘥󾘥󾘥󾘥󾘥󾘫󾘥󾘥󾘥󾘥
󾘥󾘥󾘭
The battery life is getting shorter and it may cause leaks or
explosion.
󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥󾘥
󾘥󾘥󾘥󾘭
Dew condensation; small drops of water that form when warm air
touches a cold surface. Please check the environment of installation
area. Heavy dew condensation may damage the product or cause a
malfunction.
How to apply external power in the emergency
PIN code CCard key

Description shortcut icons
Normal mode
Safety mode
ㆍPIN code : 10 entries (6~12 digits) / Card key : 50 entries
: [N] button RC : Registration new code : Card key
123456789
REG.
PIN code
1 4 RC ㆍㆍㆍ
Card key
1 5 ㆍㆍㆍ
DEL. All Card key
2 5
※ Repeat highlighted part of diagram above for continuous registration.
※ Keep the door open while you register PIN code / Card keys to prevent yourself from
accidentally getting locked out.
How to unlock / lock from outside
How to unlock from outside
PIN code CCard key
How to unlock from outside without disturbing others (Mute function)
PIN code 3"sec

OFF C
Card key 3"sec

OFF
How to lock [Auto lock / Manual lock] from outside
Auto lock
Lock
※ If the door is not closed correctly, warning sound will go o󽗈.
Please check and con󽗉rm the door closing status.
Manual lock
0Lock
How to set auto-locking / manual-locking
Auto lock
In 󾘥 mode, door will be locked automatically.
In 󾘥 mode, door will be locked by pressing manual
lock button.
* As the auto locking function does not work in the manual lock
mode, please make sure to check the door is locked when you
leave.
Manual lock
How to replace batteries
If battery lamp is blinking RED and alarm sounds, open battery cover and replace all batteries,
6V(1.5V "AA" size LR6 Alkaline)
Additional function
How to open from indoor
󾘽󾘥󾘥󾘾
Just pulling down the handle to unlock the door anytime.
󾘨󾘥󾘧󾘥󾘧󾘱󾘥
Door can be opened with simple action of pulling down the
handle. Even the door lock is out of order, you can escape
easily in the emergency such as fire.
˙ Please con󽗉rm that the door is properly closed. Double locking is available when the door is closed.
˙ Even in [Double lock] mode, it is available to open the door from inside by pulling down the handle.
˙ Pushing down the handle from the inside will automatically turn o󽗈 Double locking mode.
˙ If the sound is set to mute only indicator lamp is blinking.
Note
How to set double locking function
1.
[Double locking] Set-up
2.
[Double locking] Cancel
Press [Manual lock], 
[Double lock] button 
for 3 seconds.
Press [Manual lock],
[Double lock] button
or pulling down the
handle.
~Biririk↑ ~Biririk↓
Note
˙
Before closing the door, make sure that deadbolt is not extrude.
How to lock from inside
1. In auto lock mode
When the door is closed,
door is locked with beep sound and
voice guide automatically.
2. In manual lock mode
Press [Manual lock] button
to lock the door.
Press manual lock button,
then door is locked.
: [N] button
C
: PIN code : Trespass alarm
: [S] button
: Card key : Smartphone
application
: [ ] button : 9V alkaline battery(6LF22) : Authentication
code
#
: [#] button
UC
: User code : Open button on
application
: Touch the front
pad
MC : Manager code
: [Communication
function] button
RC
: Registration new code
RAN
DOM
CODE
: Random code
※ Normal mode : [N] button / Safety mode : [S] button
ㆍPIN code: 10 entries (6-12 digits) / Card key: 50 entries
Safety mode
1 2 3 4 5 6 7 8 9 10 11 12
REG.
PIN code
1 4 MC
or
#RC ㆍㆍㆍ
Card key
1 5 MC
or
#
Card
Registration
Number(2digits)
#
DEL.
All 
Card key
2 5 MC
or
#
Individual
Card key
3 5 MC
or
#
Card
Registration
Number(2digits)
#
Safety mode (Manager)
Change Manager
code
8 4 MC
or
#RC #RC #
REG.
Manager
Card key
8 5 MC
or
#
DEL.
All
manager 
Card key
8 6 MC
or
#5
※ Repeat highlighted part for continuous registration or deletion.
Warning : Please do not forget manager PIN code.
If you forget this number, please contact to your local agency.
Keep the door open while you register PIN code / Card keys to prevent
yourself from accidentally getting locked out.
How to use random security coding function
Usage
RAN
DOM
CODE C
ㆍ Normal mode : ideal for new users or low security environments
ㆍ Safety mode : higher security level via use of a manager PIN code. Provides individual registration and
deletion function
: [N] button : [S] button : Card key
UC : User code MC : Manager code RC :
Registration n ew code
How to change from normal mode to safety mode
12345678910
Safety mode
3"Sec UC #MC #MC #
How to change from safety mode to normal mode
Normal mode
3"Sec MC #UC #UC #
How to change Normal mode / Safety mode
Auto lock function / Auto relocking system
When the door is closed, it will be locked
automatically.
If the door is not opened within 7 seconds after
input PIN code or card key it will be relocked
automatically to protect user`s property.
1. Auto lock function 2. Auto relocking system
How to control voice guide volume
Min. volume
#C or #1
1
Mid. volume 2
Max. volume 3
Guest PIN code (Temporary use)
REG. #C or #2RC #RC #
How to control operation volume
Vol. up
#C or #3
9
Vol. down 7
Status checking guide
Voice guide #C or #4
Check battery capacity
Checking 
the battery #C or #5
Warning function against Illegal entry or hacking
Operate Wrong PIN code three times / unregistered Card three times
Warning alarm function against trespass by force
PIN code CCard key

Can open the door at anytime only
by pulling down this handle
󾘥
Push up to open the battery cover
󾘥󾘥
󾘥󾘮󾘥󾘥󾘥
󾘲󾘥󾘳󾘥
Door will be locked automatically
after closing
󾘲󾘥󾘳󾘥
Door will be locked by pressing
manual lock button after closing
󾘥
󾘲󾘥󾘳󾘥
Button to lock the door manually
󾘲󾘥󾘳󾘥
Button to set double locking mode
2. Back Ass`y
󾘲󾘳󾘫󾘥󾘲󾘳󾘫󾘥󾘲 󾘳󾘥
˙[N] : Registration or deletion of PIN
code, Card in normal mode
˙[S] : Registration or deletion of PIN
code, Card in safety mode
˙[ ] : Registration or deletion of
optional RF communication
pack
How to register / delete remote key
REG. Remote key
3"Sec 1C
or
#
or
DEL. All
remote key
3"Sec 2C
or
#
How to lock / unlock using remote key
Unlock Lock
※ Repeat highlighted part for continuous registration.
※ 1 EA battery is equipped.
※ To replace battery, open the back cover.
Wireless communication device installation
Communication pack / Remote key
(optional)
Using the Schlage Base (optional)
※ Communication packs(Mobile Access) must be purchased separately.
1. Open the battery cover on the lock and remove the batteries.
2. Plug in the wireless communication device.
3. Insert the batteries back into the lock.
4. Audible melody will sound if successful.
˙ Please insert the device in the
correct position.
Note
How to register remote key & to unlock or lock
1.5v ‘AAA’ size
alkaline
battery 1 EA
Indication lamp
[Lock] button
[Unlock] button
ㆍRemote key : 5 entries
: [Communication function] button
: Remote unlock : Remote lock
C
: PIN code : Card / Fob
Connecting with the mobile app
Disconnecting the app from the door lock
1. Install the Schlage Base via the APP Store or Google Play.
2. Activate the app (new user must register account first) and press the “ ” icon at
the top of the screen and select a door lock from the list.
3. Connect the door lock by following the guide provided in the app.
󾘥󾘥󾘯󾘥
Press and hold the [ ] button for 3 seconds.
Then, press 1 on the keypad and enter the passcode followed by the [] button.
1. Press and hold the [] button for 3 seconds.
2. Then, press 2 on the keypad and enter the passcode followed by the [] button.
Rev.04