Schlage FE595 Operating instructions

Disable
Vacation Mode
Functions
See reverse for function descriptions. Beeps sound only when beeper is enabled.
U
3Lights+3Beeps
turnsblue
3Lights+3Beeps
3Lights+3Beeps
1Light+ 1LongBeep
Enter
ProgrammingCode
(six numbers)
Waitfor
Press
Press
Delete
User Code
Waitfor
Enter Unwanted
UserCode
(four numbers)
Waitfor
EnterSameUnwanted
UserCode
(four numbers)
Success!
3Lights+3Beeps
Keypad
turnsblue
3Lights+3Beeps
3Lights+3Beeps
1Light+ 1LongBeep
Change
Programming
Code
Enter Current
ProgrammingCode
(six numbers)
Waitfor
Press
Press
Waitfor
Enter New EnterSame New
ProgrammingCode Programming Code
(six numbers) (six numbers)
Waitfor Success!
3Lights+3Beeps
Keypad
turnsblue
3Lights+3Beeps
3Lights+3Beeps
1Light+ 1LongBeep
Enter
ProgrammingCode
(six numbers)
Waitfor
Press
Press
Enable
Vacation Mode
Enter
ProgrammingCode
(six numbers)
Success!
3Lights+3Beeps
Keypad
Success!
turnsblue
1Light+1LongBeep
1Light+ 1LongBeep
Enable/Disable
Beeper
Enter
ProgrammingCode
(six numbers)
Waitfor
Press
Press
Success!
3Lights+3Beeps
Keypad
turnsblue
1Light+ 1LongBeep
Delete ALL
UserCodes
Enter
ProgrammingCode
(six numbers)
Waitfor
Press
Press
3Lights+3Beeps
Keypad
turnsblue
Waitfor
Enter
ProgrammingCode
(six numbers)
Success!
3Lights+3Beeps
1Light+ 1LongBeep
Enter
ProgrammingCode
(six numbers)
Waitfor
Press
Press
Enable/Disable
Turn Lock
Feature
Success!
3Lights+3Beeps
Keypad
turnsblue
1Light+ 1LongBeep
23780034
Keypad Locks
Programming Guide
Enter
Press
Press
EnterNew
EnterSame New
Add
ProgrammingCode
(six numbers)
UserCode
(four numbers)
UserCode
(four numbers)
ser Code
Waitfor
Keypad
Waitfor Waitfor Success!
Codes
Programming Code (Six Numbers)
•Used to program the lock.
•DOES NOT unlock the lock.
•If you forget the Programming
Code, you can reset your lock
back to factory settings. See the
Keypad Locks User Guide for more
information.
•Lock comes preset with a default
ProgrammingCode.
User Codes (Four Numbers)
•Used to unlock the lock.
•Up to 19 possible User Codes
can be stored in the lock at a
time.
•Lock comes preset with two
default User Codes.
Default Programming Code
Código de programación
predeterminado
Code du défaut programmation
Place Label Here
Poner la etiqueta aquí
Placer l’autocollant ici
Default User Codes
Códigos de usuario predeterminado
Codes du défaut utilisateur

Error Indications
*Beepssoundonly whenbeeper is enabled.
Problem
Beeps*
Lights
Solution
User Code does not unlock lock.
2
User Code entered is not a valid User Code.
1 High,
1 Low
then
Vacation Mode is enabled. Disable Vacation Mode.
Nothing happens when numbers are
pressed.
None
None
Too many incorrect User Codes have been entered.
Wait 30 seconds and try again.
Ifkeypaddoesnotrespondafter30seconds,then
replace battery.
There is a delay before unlock after a
valid User Code is entered.
High/
Low,
then 1
then
Battery is low and should be replaced. See the
Keypad Locks User Guide.
blinking but no codes have been
entered.
None
Blinking
BatteryisdeadandMUSTbereplaced.See the
Keypad Locks User Guide.
CannotaddanewUser Code.
High/Low
19 User Codes already exist. Delete a User Code
before adding a new one.
2
SecondUser CodeentereddidnotmatchfirstUser
Code entered.
TheUserCodematchesthefirstfourdigitsofthe
existing Programming Code.
Cannot delete a User Code.
2
SecondUser CodeentereddidnotmatchfirstUser
Code entered.
Cannot change Programming Code.
2
Second Programming Code entered did not match
first Programming Code entered.
First four digits of new Programming Code match an
existing User Code.
Cannot delete all User Codes.
2
Programming Code entered second time is incorrect.
Lock will not stay in programming mode.
2
Anykeyotherthan was pressed immediately
after the programming code was entered.
An incorrect entry was made during the
programming process.
keypad.schlage.com
Need Help?
Calling From:
U.S.A.: [phone]
Canada: [phone]
Mexico: 018005067866
Get thefree
mobile app at
gettag.mobi
Function Descriptions
AddUserCode
•Adds one User Code to the lock.
Delete User Code
•DeletesoneUserCodefromthelock.
Change Programming Code
•Changes the Programming Code.
Enable/Disable Vacation Mode
•WhenVacationModeisenabled,UserCodeswillnot
unlock the lock.
•Used to ensure lock remains secure while you are away
fromhome.
•Disable vacation mode to resume normal operation.
Enable/Disable Beeper
•When the beeper is enabled, the lock will beep once with
each key press, and multiple times for other indications.
Delete All User Codes
•Deletesall theUser Codesfrom thelock at once.
Enable/Disable Turn Lock Feature
•AppliestoKeypadDeadbolt(BE365) only.
•Enabled by default. Allows easy re-locking of deadbolt
from the outside.
•When disabled, a valid user code must be entered to lock
the deadbolt from the outside.

©2011 Schlage Lock Company
Printed in U.S.A.
23780034 Rev.04/11-a