SECO-LARM Enforcer Access SD-962AR-36A User manual

SD-962AR-36A, SD-962BR-36A
SD-962DR-36A
Rim-Type Exit Device
Manual
 For exit doors - Allows exit from ins
ide while
locked from outside
 Reversible non-handed design fits either
right-hand or left-hand doors
 For metal or wood doors up to 13/4" thick
 Stainless steel 3/4" throw latch bolt
 Deadlocking latch – Prevents the use of
credit cards or similar means to open the
latch bolt
 Fits doors from 30" to 48" wide
 Allen-type 1/4-turn dogging lock - Allows the
exit device to be unlocked for extended periods
of time
 Includes all hardware for typical installations
 Works with standard external door handle/lock
devices (not included)
 Heavy-duty steel construction
 Stainless steel spring
 BHMA 156.3
Features:
Panic Hardware
51X
4

ENFORCER Rim-Type Exit Device
2 SECO-LARM U.S.A., Inc.
Introduction:
The ENFORCER Rim-Type Exit Device, when mounted on the inside of a door to block entry to a
protected premises, securely locks the door from outside access while allowing users inside the
protected premises to exit.
The stainless steel enclosure protects the exit device from abuse, yet easily unlocks the door from
the inside by users who require exit. It can be connected to an entry-type lever trim or to any
physical locking device on the outside of the door in order to allow entry to authorized personnel.
Dimensions:
Specifications:
Construction Steel
For doors
1
3
/
4
"
(44.5mm) thick, wood or metal
Hand Non-handed
Latch bolt Stainless steel, 3/4" (19mm) throw
Dead latch
Stainless
steel
,
5
/
8
"
(16mm) throw
Strike For 5/8" (16mm) stop, plus shim for 1/2" (12.7mm) stop
Spring Stainless steel
Chassis
Steel
Cover High-density rust-resistant alloy
Rail assembly Steel
End cap
Steel
Dogging Allen-type dogging standard
Dimensions 323/4"x67/32"x21/2" (832x158x64 mm)
Weight
6
-
lb 10
-
oz (3.0
kg)
Parts List:
Screws Included:
1x Rim-Type Exit Device
1x Manual
1x Mounting template
1x Strike
1x Strike shim
1x Hex wrench
1x End cap
1x End cap bracket
7x Mounting screws (see below)
Mounting chassis to door:
2x 1/4"x3/4" machine screws (oval Philips head,
plated steel)
Connecting end cap to end cap bracket:
1x M4x6mm machine screw (flat Philips head,
stainless steel)
Mounting end cap bracket to door:
2x 1/4"x3/4" machine screws (oval Philips head,
plated steel)
Mounting strike to door:
2x 1/4"x3/4" machine screws (oval Philips head,
stainless steel)
6
7
/
32
"
(158mm)
2
"
(
5
1mm)
2
1
/
2
"
(64mm)
2
"
(51mm)
32
3
/
4
"
(83
2
mm)
1
3
/
4
"
(44mm)
19
1
/
2
"
(
495
mm)

ENFORCER Rim-Type Exit Device
SECO-LARM U.S.A., Inc. 3
Overview:
Sample Applications:
Double Door with Mullion
Single Door
Double Door
without Mullion
Chassis cover
Chassis
Mechanism housing
Push bar Dogging device –
Use hex wrench
to lock in
the open position so the
door can be opened
from outside the
protected premises
End cap
Strike
End cap bracket
Door
Draw line here
40
"
Mounting:
21/4"
Door
Exit device
Trim Trim
Door
Exit device
Trim Trim
Door
Door
Exit device
Exit device
23/4"
Double-door strike (not included)
Door
Exit device
Trim
21/4"
Strike
Strike
shim
(if needed)

ENFORCER Rim-Type Exit Device
4 SECO-LARM U.S.A., Inc.
Final Installation:
1.
Mark the vertical cen
ter line of the exit bar by drawing a line across th
e door at 40
"
above the
floor. See "Mounting" on page 3.
2. Fold the included template, and align the center lines on the template with the center line drawn
on the door. Then mark the position of the mounting holes for the latch assembly.
See "Mounting" on page 3.
3. Move the template against the door stop and then mark the mounting holes for the strike.
4. Drill the holes as marked on the door and the mullion. See "Mounting" on page 3.
Note: For doors with a door stop depth of under 5/8", it may be necessary to use the included 1/8"
strike shim. For doors with a door stop depth of
5
/
8
"
or more, the strike sh
im may not be necessary.
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com PITSW6
Phone: [phone] | [phone] Email: [e-mail] MI_SD-962xR-36A_211116.docx.
WARNING: Incorre
ct mounting that leads to exposure or moisture inside the enclosure could damage the device and will
void the warranty.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-
LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All t
rademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2021 SECO-LARM U.S.A.,
Inc. All
rights reserved.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while
used in normal
service for one (1) year from the date of sale to the original customer. SECO-
LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if
damage is caused by or
attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-
LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM
’s
option. In no event shall SECO-LARM be liable for any specia
l, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
California Proposition 65 Warning: These
products may contain chemicals which are known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.