SECO-LARM Enforcer SD-C141S User manual

SECO-LARM U.S.A., Inc.
Specifications:
Made in Taiwan
DoorCloser.pmd
SECO-LARM®U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: [phone] Fax: [phone]
Website:www.seco-larm.com
E-mail:sales
@ seco-larm.com
PITSW6
®
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship whileused in normal
service for a period of one (1) year from the dateof sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part ifthe unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused byor attributed to acts of God, physical or electrical misuse or abuse,neglect,
repair, or alteration, improper or abnormal usage, orfaulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causesother than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for anyspecial, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyoneelse.
SD-C141S
3’ 6" (1100mm) wide
88lbs. (40kg.) ~ 143lbs.(65kg.)
Metal or wood
Non-handed
Anodizedaluminum
Forged steel
Door widths
Door weight
Door types
Hand
Body
Arm Features:
•Reversiblenon-handed design
•Metal or wood doors up to 42" wide
•Two valve adjustments (Sweep and
Latch) for speed.
•Anodizedaluminumbody
•Silver finish
•Forged steel arms
•Includeshardware
Door Closer
SD-C141S
ENFORCER®
Installation Manual
WARNING: Incorrect mounting which leads to exposure to rain or moisture inside the enclosure coulddamage the
device and void the warranty.
NOTICE: The information and specifications printed in this manual are current at the time ofpublication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason,SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsiblefor misprints or typographical errors.
Copyright © 2007 SECO-LARM U.S.A., Inc. Allrights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
Caution:
A misadjusted door closer can cause
damage or injury. Read the complete
installation manual before you begin
to insure correct installation.
Fig. 1 -- Dimensions:
SECO-LARM's SD-C141S Door Closer is designed to work on either left or right swinging doors. It has adjustable sweep
and latch speed for more control over how fast the door swings.
What It Does:
Door Closer Installation Manual
1
2/
4
” (58mm)
11/16” (17mm)
3
5/
16” (133mm) 3” (75mm)
3
2/
16”
(55mm)
3
8/
16” (208mm)
3
1/
8
”
(40mm)

Door Closer Installation Manual
Door Closer Installation Manual
SECO-LARM U.S.A., Inc.
Fig. 2 -- Parts List
Fig. 3
2 x 3/16" UNC Arm Door Frame Bracket Screws
4 x 3/16" - 24 Door Closer Body Attachment Screws
1 xArmAxle Screw
1 xArmAssembly
1 xAxleCap
1 x Cover Plate
Installation:
1. Determine the type of door swing (see Fig 3).
2. Select the appropriate template (Right Hand or Left Hand). Attach the template to the door.
3. Mark the mounting holes. 4 holes for the door closer body and 2 holes for the door frame arm
bracket.
4. Drill pilot holes for the screws.
5. Attach the door closer to the door and frame.
6. Adjust the door closer (see caution at the front of the manual).
Adjustment:
1. Arm adjustment: (see Fig. 4).
•Loosen jam nut on adjustment arm.
•Thread arm in or out until adjustment arm is at 90 degree angle from the door frame.
•Tighten jam nut.
2. Closing speed adjustment: (see Fig. 5)
•Adjust sweep speed to the desired closing speed.
•Adjust latch speed so that just before the door closes all the way it slows just before latching.
Left-Hand Door Right-Hand Door
Left-Hand Door Right-Hand Door
Fig. 4
Fig. 5
Note: See template for location of adjustment screws.
Step 1 Step 2
Door Closer Body
Axle Cap
Latch Speed
Adjustment Screw
Sweep Speed
Adjustment Screw
Sweep
speed
adjustment
Latch
speed
adjustment
Faster
Slower
Faster
Slower
o
90
o
Adjust arm to 90 angle from door
o
90
o
Adjust arm to 90 angle from door