SECO-LARM SD-7104SGEX1Q User manual

®
SD-7104SGEX1Q / SD-7204SGEX1Q
SD-7304SGEX1Q
Vandal Resistant Push-to-Exit Plates
Manual
Features:
•
Switch contact rating: 50A@24VA
•Equipped with NO/N (DPST) switch
•"EXIT" and "SALIDA" silk-screened
on plate (except SD-7304SGEX1Q)
•
Available in slimline, single-gang and
European plates.
•Vandal-Resistant 1" (25mm) push-button
switch
SD
-
7104SGEX1Q
SD
-
7204SGEX1Q
SD
-
7304SGEX1Q

ENFORCER Vandal Resistant Push-to-Exit Plates
2SECO-LARM U.S.A., Inc.
Please read the manual carefully
before beginning installation
.
1. Run two wires through the wall to the back-box.
2. onnect wires to either 1-2 (N. .) or 3-4 (N.O.).
3. For weather-
resistant installation, use a waterproof back box and apply a bead of silicone sealant where
the back box contacts the faceplate and around the faceplate mounting screws.
4. Screw plate to the back-box, using caution not to pinch any wires.
1x
Push
-
to
-
exit button with s
tainless
-
steel
face
plate
4x
rimp style push on connect
ors
2x
Mounting Screws
1x
Manual
Model
SD
-
7104SGEX1Q
SD
-
7204SGEX1Q
SD
-
7304SGEX1Q
Plate
Slim
line
Single
-
gang
European
ontact rating
50A@24VA
Switch type
N.O./N. .
IP Rating
IP65
Operating t
emperature
-
4
°
~140
°
F (
-
20
°
~60
°
)
Dimensions
4
1
/
2
"x1
9
/
16
"
x
13
/
16
"
(115x39x20 mm)
4
1
/
2
"x2
3
/
4
"
x2
13
/
16
"
(115x70x20 mm)
3
3
/
8
"x3
3
/
8
"
x
13
/
16
"
(86x86x20 mm)
Speci ications:
Installation:
Parts List:
Connections:
Dimensions:
13
/
16
"
(20mm)
1
3
/
16
"
(30mm)
1"
(30mm)
(4) N.O.
(2) N.C.
(1)N.C.
(3)N.O.

ENFORCER Vandal Resistant Push-to-Exit Plates
SECO-LARM U.S.A., Inc. 3
S
ample Installations:
1. Installation with an Electromagnetic Lock
2. Installation with an Electromagnetic Lock and Keypad
Vandal
-
Resistant
Push-to-Exit Plate
Access ontrol
Power Supply
EAP-5D1Q shown
Digital Keypad
(outside the
protected area)
SK-1011-SDQ shown
Vandal
-
Resistant
Push-To-Exit Plate
(inside the
protected area)
ENFOR ER Series
Electromagnetic Lock
Access ontrol
Power Supply
EAP-5D1Q shown
ENFOR ER Series
Electromagnetic Lock
(on back)
(on back)
Tamper
O/P (N. .)
(+)
(–)
(
–
) (+)
12VD Battery
(optional)
(
–
) (+)
12VD Battery
(optional)
4
2
1
3
4
2
1
3
(+)
(–)
EXIT
SALIDA
EXIT
SALIDA

ENFORCER Vandal Resistant Push-to-Exit Plates
4SECO-LARM U.S.A., Inc.
Sample Installations (Continued):
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, A 92606
Website:
www.seco
-
larm.com
Phone:
(949) 261
-
2999 | (800) 662
-
0800
Email: sales@seco
-
larm.com
PITSW1
Order Part#
763
-
158
-
4
%
MI_SD
-
7x04SGEX1Q_190716.
docx
NOTICE
:
The SE O
-
LARM policy is one of continual development and improvement. For that
reason, SE O
-
LARM
reserves the right to change specifications without notice. SE O-LARM is also not responsible for misprints. All t
rademarks
are the property of SE O-LARM U.S.A., Inc. or their respective owners. opyright © 2019 SE O-LARM U.S.A., Inc. All
rights reserved.
WARRANTY:
This SE O
-
LARM product is warranted against defects in material and workmanship while
used in normal
service for one (1) year from the date of sale to the original customer. SE O-LARM’s
obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SE O-LARM.
This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, negle
ct, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SE O-
LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole oblig
ation of
SE O-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SE O-LARM
’s
option. In no event shall SE O-
LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
IMPORTANT
:
Users and installers of this product are responsible for ensuring that the installation and configuration of this
product complies with all national, state, and local laws and codes related to locking and egress devices. SE O-
LARM will
not be held responsible for the use of this product in violation of any current laws or codes.
3. Installation with an Electric Door Strike
Vandal
-
Resistant
Push-To-Exit Plate
(on back)
SE O
-
LARM
Electric
Door Strike
4
2
1
3
(
–
) (+)
12VD Battery
(optional)
(+)
(–)
EXIT
SALIDA
Access ontrol
Power Supply
EAP-5D1Q shown
IMPORTANT
WARNING
:
For a weather
-
resistant installation, ensure that the unit is installed in a waterproof back box, and
that the faceplate and
faceplate screws are properly sealed. Incorrect mounting may lead to exposure to rain or moisture in
the enclosure which could cause a dangerous electric shock, damage the device, and void the warranty. Users and
installers are responsible for ensuring that this product is properly installed and sealed.