Securam D Series User manual

Set aUser Code for the Enrolled Admin (ID 01-02)
•Pre ss “Menu/OK”.The scre en will show “S elect
Menu”.
•Pre ss “▼”to select “Syst em Menu”, press “Menu/OK”
again.
•Place the user’s finge r on the fingerprint scanner
and hold.
•After the fingerprint is verified, press “▼”to select
“Set/Change User Code”, press “Menu/Ok”.
•When the screen displays “N ew Code”, ent er a 6
digit co de.
•Enter the same 6digit co de again.
•The new co de is now set successfully.
Congratulations on the purchase of your new SECURAM ScanLogic D Series Lock! This Quick Start guide will help
you set up your biometric safe lock for use. Note: All programming mustbe completedwith the safe door open.
The safe lock system is powered by (1) 9V alkaline battery. Duracell or Energizer brands are recommended.
Once the 9V battery is in stalled, the ScanLogic DSe ries
is rea dy to enroll its first fingerprint.To activate the
enrollment process, place your finger on the reader.
The LED display will illuminate with this message:
•The Time and Date wil l appear on the screen.
•Verify if the Time and Date is correct.
•Each of the ele ments of th e date and time will flash
when it is available to be set.Use the“▲”or “▼”to
scroll to the co rre ct value and Press OK to move to
the next element.
•Place your finger on the optical reader and hold.
•Hold your finger on the reade r until the messages
above appear.Your fingerprint is rea d, ch eck ed and
enrolled.
•Note:This 1st finge rprint is the Ad ministrato r's
fingerp rint and will be used to manage the
programming of this system
To Open Lock with your Fingerprint
•Place your finger on the optical reader.
•Your fingerprint will be read, verified and the lock
will open.That’s it!
Quick Start Guide –ScanLogic D Series

Enable User Code (ID03-30)
•Press “Menu/OK”. The screen will show “Select
Menu”. Press “▲” or “▼” to select “System Menu”.
Press “Menu/OK” again.
•Place an enrolled administrator’s finger (ID No. 01
or 02) on the scanner and hold. After the fingerprint
is verified successfu lly, press “▲” or “▼” to select
“Enable User Code”, press “Menu/Ok”.
•The screen will display “ID:03 Code Enable?”, press
“▲” or “▼” to select the desired ID No. to be
enabled. When the desired ID No. is visible on the
screen, press “Menu/Ok” to select. This User ID will
now have the ability to have a code in addition to an
enrolled fingerprint.
Set User Code (ID03-30)
Important: The User must no w set his own code u sin g
his enrolled fingerprint.
•Press “Menu/Ok”, press “▲” or “▼” to select
“System Menu”. Enter the System Menu with the
User’s fingerprint (in this example using the
fingerprint of ID No.3).
•Press “▲” or “▼” to select “Set/Change User Code”.
•Enter a unique 6 digit code.
•Enter the same 6 digit code.
•When the LCD screen displays: “ID:03 Code Saved”,
the code of ID:03 has been set successfully .
•Note: If consecutive four digits of a new code (for
example 512341) is the same as one of the enrolled
codes (612345) , LCD screen wil l sh ow: “Code is
similar” and the code will not be accepted. Enter a
different code for this User.
For a full set of Operating Instructions please ca ll
[phone] or email info@secura msys.com
To Open the Lock using your Code
•Enter 6 digit code.
•Valid code will be verified and the lock will open.
That’s it!
Enroll a New User (ID 03-30)
•Press “Menu/OK”. The screen will show “Select Menu”.
•Press “▲” or “▼” to select “System Menu”. Press
“Menu/OK” again.
•Place an enrolled administrator’s finger (ID No. 01 or
02) on the scanner and hold.
•After the fingerprint is verified successfully, the LCD
screen shows: “Select Menu”, press “▲” to select
“Enroll New User”. Press “Menu/OK”.
•Select ID and press “▲” or “▼” to ID number and
press “Menu/OK”.
•Place a finger on the optical reader and hold.
•Hold finger on the reader until the messages above
appear. The fingerprint is read, checked and enrolled
Quick Start Guide –ScanLogic D Series
IMPORTANT: Warranty Information
Your safe lock is eligible for a 12 month warranty covering
product defects. Within 90 days of purchasing your safe/safe
lock, please visit our website to register your product.
Please visit www.securamsys.com/warranty and look for the
button entitled “Register My Warranty”.