Sena MESHPORT BLUE User manual

1.3.0
QUICK START GUIDE
ENGLISH
MESHPORT
BLUE
BLUETOOTH TO MESH INTERCOM ADAPTER FOR
GENERAL BLUETOOTH HEADSETS

2
PRODUCT FEATURES
The easy-to-use MeshPort Blue will turn any
General Bluetooth headsets into a more advanced
and flexible communication device with the
simple push of a button.
The MeshPort Blue for General Bluetooth
headsets allows for seamless communication with
other General Bluetooth headsets connected with
MeshPort Blue.
Bluetooth®4.1
Mesh Intercom™
up to 0.8 km (0.5 mi)*
* in open terrain

3
GETTING STARTED
1. Update this product for free with the latest
firmware to fully enjoy the new advanced
features built into this product. Visit
senaindustrial.com to see how to update
your product.
2. Users can follow Sena on Facebook, YouTube,
Twitter and Instagram to receive the most up
to date information on products, helpful tips
and all other announcements regarding Sena
products.
SENA Technologies, Inc.
Customer Support: senaindustrial.com

4
TABLE OF CONTENTS
1. ABOUT THE MESHPORT BLUE 6
1.1 Product Details 6
1.2 Package Contents 6
1.3 Installing the MeshPort Blue 7
1.3.1 Using the Belt Clip Mount 7
1.3.2 Using the Rubber Strap Mount 8
1.3.3 Attaching the Flat Surface Mount 8
2. GETTING STARTED 9
2.1 Downloadable Sena Software 9
2.1.1 Sena MeshPort App 9
2.1.2 Running the Sena MeshPort App 9
2.1.3 Sena Device Manager 10
2.2 Powering On and Off 10
2.3 Charging 10
2.4 Checking the Battery Level 11
2.5 Adjusting the Mesh Intercom Volume 11
3. MESH INTERCOM 12
3.1 What is Mesh Intercom 12
3.1.1 Open Mesh 12

5
3.2 Bluetooth Pairing 13
3.2.1 Initially Bluetooth Pairing the
MeshPort Blue 14
3.2.2 Bluetooth Pairing When the MeshPort
Blue is Turned Off 14
3.2.3 Bluetooth Pairing When the MeshPort
Blue is Turned On 15
3.3 Starting Mesh Intercom 15
3.3.1 Mesh Intercom On and Off 15
3.3.2 Mesh Intercom Reconnection 15
3.4 Using the Mesh in Open Mesh 16
3.4.1 Channel Setting (Default: channel 1) 16
3.5 Muting the Microphone (Default: Unmute) 16
3.6 Mesh Intercom Repeater Mode 17
4. TROUBLESHOOTING 18
4.1 Firmware Upgrade 18
4.2 Fault Reset 18
4.3 Factory Reset 18
QUICK REFERENCE 19

6
1. ABOUT THE MESHPORT BLUE
1.1 Product Details
Mesh Intercom
Antenna
Status LED
Multi-function Button
DC Power Charging &
Firmware Upgrade Port
1.2 Package Contents
Main Unit Mesh Intercom
Antenna
Belt Clip
Mount
Rubber Strap
Mount
Flat Surface
Mount
USB Power &
Data Cable

7
ABOUT THE MESHPORT BLUE
1.3 Installing the MeshPort Blue
Install the MeshPort Blue where the antenna is not blocked
by the human body as much as possible.
When the human body is blocking the antenna, the Mesh
Intercom signal strength will be weakened.
1.3.1 Using the Belt Clip Mount
1. Attach the belt clip mount to the
back of the unit along the guide
rail, as shown in the illustration,
until you hear a click.
2. Mount the assembled unit in a
convenient location, such as on
your belt, with the antenna
upwards.
3. Angle the antenna away from
you to prevent it from interfering
with your movement.

8
ABOUT THE MESHPORT BLUE
1.3.2 Using the Rubber Strap Mount
1. Place the rubber strap mount on the object, wind the
rubber band around the object, and hang it on the hook.
2. Attach the rubber strap mount on the back of the main
unit along the guide rail until you hear a click.
1.3.3 Attaching the Flat Surface Mount
1. Locate an appropriate surface for attaching the flat
surface mount, clean the mounting surface with a
moistened towel, and allow it to dry thoroughly.
2. Peel off the cover of the adhesive tape of the flat surface
mount and attach it to the surface.
3. Attach the flat surface mount on the back of the main unit
along the guide rail until you hear a click.
Note: Make sure that the main unit sticks on the surface
firmly. Maximum adhesion occurs after 24 hours.

9
2.1 Downloadable Sena Software
2.1.1 Sena MeshPort App
You can use the Sena MeshPort App without pairing your
Smartphone to the MeshPort Blue.
• Download
– Android: Google Play Store > ‘Sena MeshPort’
– iOS: App Store > ‘Sena MeshPort’
2.1.2 Running the Sena MeshPort App
1. Turn on the product.
2. Press and hold the Multi-function Button for 5 seconds
to enter Bluetooth Pairing.
3. Launch the Sena MeshPort App on your Smartphone.
4. Scan the product in the app.
• When you launch the app, the product is automatically
scanned.
• Tap the Scan icon ( ) to manually scan the product.
5. After scanning is complete, select the scanned product in
the app.
Note:
• If the product has not been scanned in the app, please
update the product to the latest firmware.
• How to identify the scanned product in the app
You can identify the product by the
six-letter code on the label on the
back of your product. XXXX
XXXX
XXXXXX
XXXXX
2. GETTING STARTED

10
GETTING STARTED
2.1.3 Sena Device Manager
The Sena Device Manager allows you to upgrade the
firmware from your PC or Apple computer. Download the
Sena Device Manager from senaindustrial.com.
2.2 Powering On and Off
To power on the MeshPort Blue, press and hold the
Multi-functionButton for 1 second. The LED flashes blue.
To power off the MeshPort Blue, press and hold the
Multi-functionButton for 1 second. The LED flashes red
once.
2.3 Charging
The MeshPort Blue can be charged using many common
methods via the supplied USB power & data cable. The LED
turns red while the MeshPort Blue is charging and turns
blue when it is fully charged. Depending upon the charging
method, the MeshPort Blue will be fully charged in about
2 hours.
Note:
• Any 3rd party USB charger can be used with Sena
products if the charger is approved by either the FCC,
CE, IC or other locally approved agencies that Sena
accepts.
• The MeshPort Blue is compatible with 5 V input USB-
charged devices only.