Sena FREEWIRE User manual

PREPARATION
Knowing the FreeWire Layout
Power Switch
Center Button
LED
AUX Port
DC Power Charging
Port
Onboard Audio In
& Firmware
Upgrade Port
Charging LED
BASIC OPERATION
Turning On/O the FreeWire
ON OFF
To turn on the FreeWire, slide the Power Switch to I. To turn o, slide
the Power Switch to O.
Charging the FreeWire
Charging
Fully charged
AC adapter
or
INSTALLATION
Installing on the Handlebar








  


Placing on the Mounting Cradle

Quick Start Guide
Bluetooth® CB and Audio Adapter
TROUBLESHOOTING
Factory Reset
If you want to restore the FreeWire to factory default settings, press and
hold the Center Button for 14 seconds. Tap the Center Button. The headset
automatically restores the default settings and turns o.
Note
If you reset your headset paired with your FreeWire to factory default
settings, you should reset your FreeWire to factory default settings as well in
order to pair them again.
Fault Reset
If the FreeWire is not working properly for any
reason, push the pin-hole Reset button located on
the back of the FreeWire while it is powered on.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: [email protected]
16.Oct
You can download the full version of the manual and view other
Sena products at the Sena website: www.sena.com.
USING THE FREEWIRE
Pairing with a Sena Bluetooth Headset
Press the Center Button for 5 seconds.
Note
The FreeWire will transmit wireless audio signals once it is paired with the
headset. If Bluetooth connection is lost, tap the Center Button once.
Connecting with the Onboard Audio System
Micro USB to 7 Pin DIN Cable for
Harley-Davidson or Micro USB to
5 Pin DIN Cable for Honda Goldwing