Sena Parani-SD1000 User manual

1
Parani-SD1000
User Guide
Version 1.0.0
2008-05-09

2
User Guide for the Parani-SD1000
Version 1.0.0
Firmware version 1.0.X
Last revised on May, 9, 2008
Printed in Korea
Copyright
Copyright 2008, Sena Technologies, Inc. All rights reserved.
Sena Technologies reserves the right to make changes and improvements to its product without
providing notice.
Trademark
Parani™ is a trademark of Sena Technologies, Inc.
Windows® is a registered trademark of Microsoft Corporation.
Ethernet® is a registered trademark of XEROX Corporation.
Notice to Users
When a system failure may cause serious consequences, protecting life and property against such
consequences with a backup system or safety device is essential. The user agrees that protection
against consequences resulting from system failure is the user's responsibility.
This device is not approved for life-support or medical systems.
Changes or modifications to this device not explicitly approved by Sena Technologies will void the
user's authority to operate this device.
Precautions and Safety
Electricity
Use only the supplied AC adapter. Use of unauthorized power adapter is not recommended. Electrical
shock may result.
Do not kink or crease the power cable or place heavy objects on the power cable. Fire can result from
damaged power cables.
Do not handle power plug and adapter with wet hands. Electrical shock may result.
Immediately power off the product and unplug the AC adapter if smoke or odors emit from the product
and adapter. Fire can result from improper use.
Immediately power off the product and unplug the AC adapter if water or other liquids are present. Fire
can result from improper use.
Product
Parani-SD meets the RS-232 standards. Do not wire with non-standard products. Damage to your
products may result from improper use.
Do not drop or subject the device to impact. Damage to your products may result from improper use.
Keep away from harsh environments including humid, dusty, and smoky areas. Damage to your
products may result from improper use.
Do not use excessive force on the buttons or attempt to disassemble the device. Damage to your
products may result from improper use.
Do not place heavy objects on the product. Damage to your products may result from improper use.
Technical Support
Sena Technologies, Inc.
210 Yangjae-dong, Seocho-gu
Seoul 137-130, Korea
Tel: [phone]
Fax: [phone]
E-Mail: [e-mail]
Website: http://www.sena.com

3
Contents
1. Introduction 5
1.1. Overview ....................................................................................................................................5
1.2. Product Specification..................................................................................................................6
2. Getting Started 7
2.1. Panel Layout ..............................................................................................................................7
2.2. Connecting the Hardware ..........................................................................................................7
2.2.1. Connecting Power to Parani-SD......................................................................................8
2.2.2. Connecting Device to Parani-SD.....................................................................................8
Appendix A: Connections 오류! 책갈피가 정의되어 있지 않습니다.
A.1. Serial Port Pin Outs ...................................................오류! 책갈피가 정의되어 있지 않습니다.
A.2. Serial Wiring Diagram................................................오류! 책갈피가 정의되어 있지 않습니다.
A.2.1. To Host with DTE Interface..............................오류! 책갈피가 정의되어 있지 않습니다.
A.2.2. To Host with DCE Interface .............................오류! 책갈피가 정의되어 있지 않습니다.
Appendix B: AT Commands 9
B.1. Terminology................................................................오류! 책갈피가 정의되어 있지 않습니다.
B.1.1. AT Command...................................................오류! 책갈피가 정의되어 있지 않습니다.
B.1.2. AT Response ...................................................오류! 책갈피가 정의되어 있지 않습니다.
B.1.3. Operation Mode...............................................오류! 책갈피가 정의되어 있지 않습니다.
B.1.4. Operation Status..............................................오류! 책갈피가 정의되어 있지 않습니다.
B.1.5. Security............................................................오류! 책갈피가 정의되어 있지 않습니다.
B.1.6. Symbols...........................................................오류! 책갈피가 정의되어 있지 않습니다.
B.2. Command Category...................................................오류! 책갈피가 정의되어 있지 않습니다.
B.3. Command Description ...............................................오류! 책갈피가 정의되어 있지 않습니다.
B.3.1. ATZ................................................................................................................................9
B.3.2. AT&F..............................................................................................................................9
B.3.3. AT...................................................................................................................................9
B.3.4. AT+UARTCONFIG,Baudrate,Parity,Stopbit...................................................................9
B.3.5. AT+USEDIP?...............................................................................................................10
B.3.6. AT+BTINFO?...............................................................................................................10
B.3.7. AT+BTINQ?.................................................................................................................10
B.3.8. AT+BTLAST?...............................................................................................................10
B.3.9. AT+BTVER?................................................................................................................11
B.3.10. AT+BTMODE,n..........................................................................................................11
B.3.11. +++.............................................................................................................................11
B.3.12. AT+SETESC,nn.........................................................................................................11
B.3.13. ATO............................................................................................................................12
B.3.14. AT+BTCANCEL.........................................................................................................12
B.3.15. AT+BTSCAN..............................................................................................................12
B.3.16. AT+BTSCAN,n,to.......................................................................................................12
B.3.17. AT+BTSCAN112233445566,to..................................................................................13
B.3.18. ATD............................................................................................................................13
B.3.19. ATD112233445566....................................................................................................13
B.3.20. ATA.............................................................................................................................14
B.3.21. ATA112233445566.....................................................................................................14
B.3.22. ATH............................................................................................................................14
B.3.23. AT+BTKEY=$string....................................................................................................14
B.3.24. AT+BTSD? ................................................................................................................15
B.3.25. AT+BTCSD................................................................................................................15
B.3.26. AT+BTFP,n.................................................................................................................15
B.3.27. AT+BTSEC,Authentication,Encryption......................................................................15
B.3.28. AT+BTNAME=$string................................................................................................16

4
B.3.29. AT+BTLPM,n.............................................................................................................16
B.3.30. AT+BTRSSI,n............................................................................................................16
B.3.31. AT&V..........................................................................................................................17
B.3.32. ATSnn? .....................................................................................................................17
B.3.33. ATSnn=mm................................................................................................................17

5
1. Introduction
1.1. Overview
Parani-SD is a terminal device for wireless serial communication using Bluetooth technology that is an
international standard of short range wireless communications. Parani-SD can communicate with other
Bluetooth devices; user may connect other Bluetooth devices that support the Serial Port Profile.
Parani-SD provides several models with different communication ranges, from 30m up to 100m for
various applications.
Parani-SD has a compact design, which allows it to be placed conveniently into various devices or
equipment. Its detachable antenna has the ability to optimize the quality and distance of wireless
communications.
Parani-SD supports FHSS (Frequency Hopping Spread Spectrum), which is a technique, native to
Bluetooth that allows the Parani-SD minimize radio interference while decreasing the likelihood of
over-air hijacking. Parani-SD also supports authentication and Bluetooth data encryption.
Parani-SD can be configured and controlled by a set of AT commands. Users can easily configure
Parani-SD on a terminal program, such as HyperTerminal, and configure for wireless communication
without modifying user’s existing serial communication program. User friendly ParaniWIN can also be
used for easy setup on Microsoft Windows.