Sena 10C EVO User manual

User’s Guide
www.sena.com
Motorcycle Bluetooth®
Camera & Communication System
1
1
2
Audio
Multitasking
English

10C EVO
© 1998-2019 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SF1™, SF2™, SF4™, SFR™, SRL™,
Momentum™, Momentum INC™, Momentum Lite™, Momentum Pro™, Momentum INC Pro™, Momentum EVO™, Cavalry™, 30K™, 20S EVO™,
20S™, 10S™, 10C™, 10C PRO™, 10C EVO™, 10U™, 10Upad™, 10R™, 3S™, SMH5™, SMH5-FM™, SMH5 MultiCom™, SMH10™, SMH10R™,
SPH10™, SPH10H-FM™, Savage™, Prism Tube WiFi™, Prism™, Bluetooth Audio Pack for GoPro®, R1™, R1 EVO™, RC3™, RC4™, Handlebar
Remote™, Wristband Remote™, PowerPro Mount™, Powerbank™, FreeWire™, WiFi Docking Station™, +mesh™, Econo™, SR10™, SM10™,
X1™, X1 Pro™, Expand™, Tufftalk™, Tufftalk Lite™, Tufftalk M™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks
may not be used without the express permission of Sena.
GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies Inc. (“Sena”) is not afliated with Woodman
Labs. The Sena Bluetooth Pack for GoPro®is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the
GoPro®Hero3 allowing for Bluetooth capabilities.
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod
touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or registered
trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners.

10C EVO
English
CONTENTS
1 PACKAGE CONTENTS ............................................................................................4
2 INSTALLING THE HEADSET ON YOUR HELMET.................................................5
2.1 Installing the Main Unit............................................................................................................5
2.2 Installing the Speakers............................................................................................................7
2.3 Installing the Microphone........................................................................................................8
2.4 Adjusting the angle ...............................................................................................................10
3 GETTING STARTED.............................................................................................. 11
3.1 Product Details......................................................................................................................11
3.2 Powering On and Off.............................................................................................................11
3.3 Charging................................................................................................................................11
3.4 Checking the Battery Level...................................................................................................12
3.5 Volume Adjustment ...............................................................................................................12
3.6 Sena Softwares .....................................................................................................................12
4 CAMERA OPERATION.......................................................................................... 13
4.1 Camera On or Off..................................................................................................................13
4.2 Camera Modes......................................................................................................................13
4.3 Video Recording ...................................................................................................................14
4.4 Video Mode (Default: Normal Recording Mode)..................................................................14
4.5 Photo Taking..........................................................................................................................15
4.6 Video Tagging .......................................................................................................................15
4.7 Format SD Card ....................................................................................................................16
4.8 WiFi Channel (Default: 5 GHz)..............................................................................................16
5 PAIRING THE HEADSET WITH BLUETOOTH DEVICES ................................... 16
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device .........................................16
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10............................17
5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree.....................................................17
5.4 Intercom Pairing ....................................................................................................................18
6 MOBILE PHONE, GPS .......................................................................................... 19
6.1 Mobile Phone Call Making and Answering...........................................................................19
6.2 Speed Dialing........................................................................................................................19
6.3 GPS Navigation.....................................................................................................................20
7 STEREO MUSIC .................................................................................................... 20
7.1 Bluetooth Stereo Music .........................................................................................................20
7.2 Music Sharing .......................................................................................................................21
8 INTERCOM............................................................................................................. 21
8.1 Two-way Intercom .................................................................................................................21
8.2 Multi-Way Intercom................................................................................................................22
9 THREE-WAY CONFERENCE PHONE CALL WITH
INTERCOM PARTICIPANT ................................................................................... 23
10 GROUP INTERCOM .............................................................................................. 24
11 UNIVERSAL INTERCOM....................................................................................... 24
12 FM RADIO .............................................................................................................. 25
12.1 FM Radio On/Off ...................................................................................................................25
12.2 Preset Stations.......................................................................................................................25
12.3 Seek and Save ......................................................................................................................25
12.4 Scan and Save ......................................................................................................................26
12.5 Temporary Preset ..................................................................................................................26
12.6 FM Sharing ............................................................................................................................26
12.7 Region Selection ...................................................................................................................27
13 FUNCTION PRIORITY........................................................................................... 27
14 CONFIGURATION SETTING ................................................................................ 28
14.1 Headset Conguration Setting..............................................................................................28
14.2 Software Conguration Setting .............................................................................................29
14.3 Camera Conguration Setting ..............................................................................................32
15 FIRMWARE UPGRADE......................................................................................... 34
16 TROUBLESHOOTING ........................................................................................... 34
16.1 Fault Reset.............................................................................................................................34
16.2 Factory Reset ........................................................................................................................35

10C EVO
4
1 PACKAGE CONTENTS
•HeadsetMainUnit 
•GearClampUnit 
•ClampUnit 
•GluedSurfaceMountingPlate 
Speaker
•Speakers 
•HookandLoopFastenersforSpeakers(4) 
•FoamSpeakerCovers(2) 
•SpeakerPads(Thick)(2) 
•SpeakerPads(Thin)(2) 
Attachable Boom Microphone
•AttachableBoomMicrophone 
•MicrophoneSponges(2) 
•HookandLoopFastenerforAttachableBoomMicrophone
•BoomMicrophoneHolder 
•HookandLoopFastenerforBoomMicrophoneHolder 
Wired Microphone
•WiredMicrophone 
•HookandLoopFastenerforWiredMicrophone 
Others
•USBPower&DataCable 
•AllenWrench 
•CigaretteCharger 

10C EVO
5
English
2 INSTALLING THE HEADSET ON YOUR
HELMET
2.1 Installing the Main Unit
2.1.1 Using the Gear Clamp Unit
1. Loosen the two screws on the back plate of the clamp unit with the
included allen wrench.
2. Insert the back plate of the clamp unit between the internal
padding and external shell of the left side of the helmet.
3. Tighten the two screws until the clamp unit is fastened rmly to
the helmet.
4. Insert a microSD card into the card slot to use camera.
5. Attach the main unit to the clamp unit until you hear a click.
1
1
2
2
3
1
2
4
5

10C EVO
6
2.1.2 Using the Clamp Unit
1. Loosen the two screws on the back plate of the clamp unit with the
included allen wrench.
2. Insert the back plate of the clamp unit between the internal
padding and external shell of the left side of the helmet.
3. Tighten the two screws until the clamp unit is fastened rmly to
the helmet.
4. Insert a microSD card into the card slot to use camera.
5. Attach the main unit to the clamp unit until you hear a click.
1
1
2
2
3
1
2
4
5

10C EVO
7
English
1
2
2
Note
Hook
Fastener
Foam
Speaker
Cover
Note:
1. If the helmet has deep ear pockets, you can use the speaker pads to
bring the speakers closer to your ears.
2. To enhance the audio quality, you can make use of the foam speaker
covers. Cover each speaker with the foam and attach the hook fastener
at the back of the speaker. Then place the speakers in the helmet as
described above. Foam covered speakers work most effectively when
they are slightly touching your ears.
2.1.3 Using the Glued Surface Mounting Plate
If you cannot install the clamp unit on the helmet, you can use the
glued surface mounting plate to attach the clamp unit to the surface of
the helmet.
1. Attach adhesive tape of the glued surface mounting plate to the
helmet.
2. Make sure that the glued surface mounting plate sticks on the
helmet rmly. Maximum adhesion occurs after 24 hours.
3. Attach the main unit to the glued surface mounting plate until you
hear a click.
1 2
2.2 Installing the Speakers
1. Attach the hook and loop fasteners for speakers to ear pockets
inside the helmet.
2. Attach the speakers to the hook and loop fasteners for speakers
inside the helmet.

10C EVO
8
2.3 Installing the Microphone
2.3.1 Using the Attachable Boom Microphone
1. Attach the hook and loop fastener for attachable boom microphone
on the inside surface of the left external shell.
2. Attach the attachable boom microphone’s mounting plate to the
hook and loop fastener.
3. Adjust the head of the microphone so that the tab is facing away
from your mouth.
4. Align the arrows on the microphone and speaker cables and
insert the microphone cable into the speaker cable.
5. Insert the speaker connector into the speaker port to connect it
to the main unit.
6. Close the cover of the speaker cable to lock the cable to the port.
Note:
You can use the boom microphone holder after attaching the hook and loop
fastener for boom microphone holder on it to ensure secure installation.
1
2
23
Tab
4 5
6 Note

10C EVO
9
English
2.3.2 Using the Wired Microphone
If you have a full face helmet, you can use the wired microphone.
1. Attach the included hook and loop fastener for wired microphone
to the inside of the helmet’s chin guard.
2. Attach the wired microphone to the hook and loop fastener for
wired microphone.
3. Align the arrows on the microphone and speaker cables and
insert the microphone cable into the speaker cable.
4. Insert the speaker connector into the speaker port to connect it
to the main unit.
5. Close the cover of the speaker cable to lock the cable to the port.
1 2
3 4
5

10C EVO
10
2.4 Adjusting the angle
You can adjust the angle for taking photos or recording videos.
You can rotate the horizontal angle by 30º. Rotate the lever below the
lens to set the desired angle.
30°
2.4.1 Using the Gear Clamp Unit
You can rotate the vertical angle by 360º. Loosen the wheel next to the
main unit and rotate the main unit to set the desired angle. Tighten the
wheel to lock it into position.
360°
2.4.2 Using the Clamp Unit
You can change the vertical angle by 20º (Default), 8º or 32º. The
vertical angle change shall be made before the clamp is mounted on
the helmet.
• Loosen the two screws on the back plate of the clamp unit with the
included allen wrench.
1
2
• Remove the angle plate and ip it up and down to make the angle
display “8º” visible. The vertical angle is changed to 8º.
• Remove the angle plate and turn it backwards to make the angle
display “32º” visible. The vertical angle is changed to 32º.
32°
8°
20°
8°
20°