Sena SPIDER RT1 User manual

2.0.0
SENA
QUICK START GUIDE
ENGLISH
MOTORCYCLE MESH COMMUNICATION SYSTEM

SENA Technologies, Inc.
Customer Support: sena.com
Downloadable Sena Software
Download the SENA MOTORCYCLES App at Google Play
Store or App Store.
SENA MOTORCYCLES
Download the following items at sena.com.
Firmware
Sena Device Manager
• Firmware upgrade
• Device configuration setting
Quick Start Guide,
User’s Guide
Follow us on Facebook, YouTube, Twitter and Instagram to check
the latest information and helpful tips.

Product Details
Mesh Intercom
Antenna
Status LED
(-) Button
Center Button
(+) Button
Mesh Intercom
Button
M
DC Power
Charging &
Firmware
Upgrade Port
Microphone Connector
Speaker
Connectors

Installation
Using the Hook and Loop Fasteners for Main Unit
1
2
Using the Double Sided Adhesive Tapes for Main Unit
1 2
Using the Clamp for Main Unit
1 2

Installing the Speakers
1
12
2
Installing the Wired Boom Microphone
1
1
2
2
Installing the Wired Microphone
1
1
2
2
• For more information about installation, refer to the User’s Guide.

Mesh Intercom Antenna
Pull the Mesh Intercom Antenna
inwards slightly to unfold it.
1
2
NOTICE
• This Quick Start Guide (Version 2.0) explains how to operate
the SPIDER RT1 with firmware version 2.0 or higher.
• For the operation of the SPIDER RT1 with a firmware version
lower than 2.0, refer to the SPIDER RT1 Quick Start Guide
(Version 1.1.0) or lower.
Icon Legend
1x
TAP Tap button the specified
number of times 10s
HOLD Press and Hold button for the
specified amount of time

Basic Operations
Powering On
1s
HOLD
Volume Up
1x
TAP
Powering Off
1x
TAP
Volume Down
1x
TAP
Checking the Battery Level
Powering On
=
=
=

Phone Pairing
① 5s
HOLD
Blinking
“Phone pairing”
② Select SPIDER RT1 in the list of
Bluetooth devices detected.
Device B
Pi
Bluetooth
SPIDER RT1
• The headset will enter the Phone Pairing mode automatically
when you initially turn on the headset.
• For more information on phone pairing, refer to the User’s Guide.

Using the Phone
Answer a Call
1x
TAP
Reject a call
2s
HOLD
End a Call
2s
HOLD
Voice Dial
3s
HOLD in
stand-by
mode
Music Control
Play/Pause
1s
HOLD
Track forward
1s
HOLD
Track backward
1s
HOLD

Mesh Intercom™
Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.
• For more information on Mesh Intercom, refer to the User’s Guide.
Mesh Intercom On
1x
TAP
Blinking
“Mesh intercom on,
Open Mesh, channel 1”
Mesh Intercom Off
1x
TAP “Mesh intercom off”
Note: When Mesh Intercom is on, the SPIDER RT1 will
automatically connect to nearby SPIDER RT1 users and the
headset will be in Open Mesh (default: channel 1) initially.

Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
Using the Button
① Enter into the Channel Setting.
2x
TAP “Channel setting, 1”
② Navigate between channels.
(1 2 ••• 8 9 Exit 1 •••)
1x
TAP
or
1x
TAP
“#”
③ Save the channel.
1x
TAP “Channel is set,
channel #”
Using the SENA MOTORCYCLES App
You can select the channel through the SENA MOTORCYCLES App.

Group Mesh
Group Mesh is a closed group intercom function that allows users to
join, leave, or rejoin a group intercom conversation without pairing
each headset.
1) Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
Open Mesh Group Mesh
You
B
C
You BC
① Users (You, B, and C) enter into Mesh Grouping to create a
Group Mesh.
5s
HOLD “Mesh grouping”
② When Mesh Grouping is completed, the users (You, B and C) will
hear a voice prompt on their headset as Open Mesh switches to
Group Mesh.
You
BC
“Group Mesh”

2) Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new
users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing
Group Mesh Open Mesh Existing Group Mesh
F
D
You
B
C
You
D
B
F
C
① One (You) of the current users in the Existing Group Mesh and
new users (D and F) in Open Mesh enter into Mesh Grouping to
join the Existing Group Mesh.
5s
HOLD “Mesh grouping”
② When Mesh Grouping is completed, the new users (D and F) will
hear a voice prompt on their headset as Open Mesh switches to
Group Mesh.
DF
“Group Mesh”

Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a
Mesh Intercom.
1s
HOLD
Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will
automatically return to Open Mesh (default: channel 1).
8s
HOLD

Configuration Menu
Accessing the Configuration Menu
10s
HOLD “Configuration menu”
Navigating Between Menu Options
1x
TAP or 1x TAP
Execute Menu Options
1x
TAP

Troubleshooting
Factory Reset
① 10s
HOLD “Configuration menu”
② 2x
TAP “Factory reset”
③ 1x
TAP “Headset reset,
good-bye”
Fault Reset
Note: Fault Reset will not restore the headset to the factory
default settings.

Quick Reference
TYPE OPERATION BUTTON COMMANDS
Basic
Operations
Power on /
Power off
1s
HOLD
1x
TAP
Volume up / Volume down or 1x
TAP
Mobile
Phone
Answer phone call 1x
TAP
End phone call 2s
HOLD
Reject phone call 2s
HOLD
Voice Dial 3s
HOLD
Music
Play/Pause music 1s
HOLD
Track forward 1s
HOLD
Track backward 1s
HOLD

TYPE OPERATION BUTTON COMMANDS
Mesh
Intercom™
Mesh Intercom on/off M1x
TAP
Channel setting M2x
TAP
Mesh Grouping M5s
HOLD
Reset Mesh M8s
HOLD
Enable/Disable Mic M1s
HOLD
2.0.0_EN_June2022