Sena 5R Lite User manual

5R LITE
MOTORCYCLE BLUETOOTH®
COMMUNICATION SYSTEM
USER’S GUIDE
ENGLISHVersion 1.0.0

1. ABOUT THE 5R LITE 5
1.1 Product Features 5
1.2 Product Details 6
1.3 Package Contents 7
2. INSTALLING THE HEADSET
ON YOUR HELMET 8
2.1 Preparing the Helmet for Installation 8
2.2 Using the Clamp for Headset Main Unit 8
2.3 Using the Glued Surface Mounting Adapter
for Headset Main Unit 9
2.4 Installing the Speakers 10
2.5 Cables Organization 11
2.6 Adjusting the Microphone Position 11
3. GETTING STARTED 12
3.1 Downloadable Sena Software 12
3.1.1 SENA MOTORCYCLES App 12
3.1.2 Sena Device Manager 12
3.2 Charging 12
3.3 Legend 13
3.4 Powering On and Off 13
3.5 Checking the Battery Level 14
3.6 Volume Adjustment 14
TABLE OF CONTENTS

TABLE OF CONTENTS CONTINUED
4. PAIRING THE HEADSET WITH
OTHER BLUETOOTH DEVICES 15
4.1 Phone Pairing 15
4.1.1 Initially Pairing the 5R LITE 15
4.1.2 Pairing When the 5R LITE is Turned Off 16
4.1.3 Pairing When the 5R LITE is Turned On 16
4.2 Second Mobile Phone Pairing - Second
Mobile Phone, GPS, and SR10 17
4.3 GPS Pairing 18
4.4 Advanced Selective Pairing: Hands-Free or
A2DP Stereo 19
4.4.1 Phone Selective Pairing - Hands-Free Profile 19
4.4.2 Media Selective Pairing - A2DP Profile 20
5. MOBILE PHONE USAGE 21
5.1 Making and Answering Calls 21
5.2 Speed Dialing 22
5.2.1 Assigning Speed Dial Presets 22
5.2.2 Using Speed Dial Presets 22
6. STEREO MUSIC 24
6.1 Bluetooth Stereo Music 24
6.2 Music Sharing 25
7. BLUETOOTH INTERCOM 26
7.1 Intercom Pairing 26
7.1.1 Using the Smart Intercom Pairing (SIP) 26
7.1.2 Using the Button 27
7.2 Last-Come, First-Served 28
7.3 Two-Way Intercom 29

TABLE OF CONTENTS CONTINUED
8. UNIVERSAL INTERCOM 30
8.1 Universal Intercom Pairing 30
8.2 Two-Way Universal Intercom 31
9. FUNCTION PRIORITY AND FIRMWARE
UPGRADES 32
9.1 Function Priority 32
9.2 Firmware Upgrades 32
10. CONFIGURATION SETTING 33
10.1 Headset Configuration Menu 33
10.1.1 Delete All Pairings 34
10.1.2 Remote Control Pairing 34
10.2 Software Configuration Setting 34
10.2.1 Headset Language 35
10.2.2 Audio Source Priority (Default: Intercom) 35
10.2.3 VOX Phone (Default: Enable) 35
10.2.4 VOX Intercom (Default: Disable) 35
10.2.5 Audio Multitasking™ (Default: Disable) 36
10.2.6 Background Volume (Default: Level 5) 37
10.2.7 HD Intercom (Default: Enable) 37
10.2.8 HD Voice (Default: Enable) 37
10.2.9 Voice Prompt (Default: Enable) 37
10.2.10 Advanced Noise Control™ (Always On) 37
11. TROUBLESHOOTING 38
11.1 Fault Reset 38
11.2 Factory Reset 39

5R LITE Motorcycle Bluetooth®Communication System | 5
1. ABOUT THE 5R LITE
1.1 Product Features
Bluetooth®5.1
Intercom up to 1 km (0.6 mi)*
Two-way Intercom
Audio Multitasking™
LCD Display
Firmware Upgradeable
* in open terrain
CHAPTER

5R LITE Motorcycle Bluetooth®Communication System | 6
1 ABOUT THE 5R LITE
1.2 Product Details
Speakers and
Microphone Port
LCD Display
DC Power Charging &
Firmware Upgrade Port
(+) Button
(-) Button
Multi-function Button

5R LITE Motorcycle Bluetooth®Communication System | 7
1 ABOUT THE 5R LITE
1.3 Package Contents
5R LITE Speakers and
Boom Microphone cable Clamp
Glued Surface
Mounting Adapter
Hook and Loop
Fasteners for Speakers Speaker Sponges
Microphone Sponges USB Power & Data Cable
(USB-C)

5R LITE Motorcycle Bluetooth®Communication System | 8
2. INSTALLING THE HEADSET
ON YOUR HELMET
To install the headset to the helmet, follow the steps below:
2.1 Preparing the Helmet for Installation
Detach the snap fasteners located on the internal paddings. Then,
remove the pads from the helmet.
2.2 Using the Clamp for Headset Main Unit
1. Insert the headset main unit into the clamp using the two connecting
slots on the back.
2. Insert the back plate of the clamp unit between the internal padding
and external shell of the left side of the helmet.
CHAPTER

5R LITE Motorcycle Bluetooth®Communication System | 9
2 INSTALLING THE HEADSET ON YOUR HELMET
3. Align the arrows on the headset main unit’s port with the speakers
and boom microphone cable, and insert the speakers and boom
microphone cable into the headset main unit’s port.
2.3 Using the Glued Surface Mounting Adapter for
Headset Main Unit
1. Insert the headset main unit into the glued surface mounting adapter
using the two connecting slots on the back.
2. Clean the area on the left side of the helmet where you will attach
the glued surface mounting adapter with a moistened towel and dry
thoroughly.
3. Peel off the cover of adhesive tape of the glued surface mounting
adapter and attach it to the left side of your helmet.

5R LITE Motorcycle Bluetooth®Communication System | 10
2 INSTALLING THE HEADSET ON YOUR HELMET
Note: Make sure that the glued surface mounting plate sticks on the
helmet firmly. Maximum adhesion occurs after 24 hours.
4. Align the arrows on the headset main unit’s port with the speakers
and boom microphone cable, and insert the speakers and boom
microphone cable into the headset main unit’s port.
2.4 Installing the Speakers
1. Peel off the cover of adhesive tape of the hook and loop fasteners for
speakers. Then, attach the hook and loop fasteners for speakers to
the ear pockets inside the helmet.
2. Attach the speakers to the hook and loop fasteners for speakers
inside the helmet.

5R LITE Motorcycle Bluetooth®Communication System | 11
2 INSTALLING THE HEADSET ON YOUR HELMET
3. Repeat the process on the other side.
Note: If your speakers are too close to your ears and your ears are
uncomfortable, you can attach a Speaker Sponge to the front of the
speaker.
2.5 Cables Organization
After aligning the cables inside the helmet, reinstall the pads to the
helmet.
2.6 Adjusting the Microphone Position
Make sure that the microphone is located properly close to your mouth
when you wear the helmet.
Fin
Adjust the direction of the microphone so that the fin side of the
microphone is facing outward, away from your lips.

5R LITE Motorcycle Bluetooth®Communication System | 12
3. GETTING STARTED
3.1 Downloadable Sena Software
3.1.1 SENA MOTORCYCLES App
By simply pairing your phone with your headset, you can use the SENA
MOTORCYCLES App for quicker, easier set up and management.
SENA MOTORCYCLES
• Device Configuration Setting
• Download the SENA MOTORCYCLES App on Google Play Store or
App Store.
3.1.2 Sena Device Manager
The Sena Device Manager allows you to upgrade firmware and
configure settings directly from your PC.
Sena Device Manager
• Download the Sena Device Manager at sena.com.
3.2 Charging
Charging the headset
Depending upon the
charging method,
the headset will be
fully charged in about
2.5 hours.
CHAPTER

5R LITE Motorcycle Bluetooth®Communication System | 13
3 GETTING STARTED
Note:
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC, or other locally
approved agencies.
• Use of a non-approved charger may cause fire, explosion,
leakage, and other hazards which may also reduce the life time or
performance of the battery.
• The headset is compatible with 5 V input USB-charged devices only.
3.3 Legend
1x
TAP Tap button the specified
number of times 10s
HOLD Press and Hold button for
the specified amount of time
“Hello” Audible prompt
3.4 Powering On and Off
Powering On
=1s
HOLD
READY
Powering Off
=1x
TAP GOOD BYE

5R LITE Motorcycle Bluetooth®Communication System | 14
3 GETTING STARTED
3.5 Checking the Battery Level
LCD Display
READY
Battery
Indicator
=High
=Medium
=Low
=Extremely Low
=Charging
3.6 Volume Adjustment
You can raise or lower the volume by tapping the (+) Button or the
(-) Button. Volume is set and maintained independently at different
levels for each audio source (i.e., phone, intercom), even when the
headset is rebooted.
Volume Up & Down
=1x
TAP
or
=1x
TAP

5R LITE Motorcycle Bluetooth®Communication System | 15
4. PAIRING THE HEADSET WITH
OTHER BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be “paired.” This enables them to recognize and
communicate with one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile
phone, GPS, MP3 player or Sena SR10 Two-Way Radio Adapter via
Mobile Phone Pairing and Second Mobile Phone Pairing.
4.1 Phone Pairing
There are three ways to pair the phone.
4.1.1 Initially Pairing the 5R LITE
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
1. Press and hold the (+) Button and the (-) Button for 1 second.
=1s
HOLD
“Phone pairing”
2. Select 5R LITE in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000. Device B
Pi
Bluetooth
5R LITE
CHAPTER

5R LITE Motorcycle Bluetooth®Communication System | 16
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Multi-function Button.
4.1.2 Pairing When the 5R LITE is Turned Off
1. While the headset is off, press and hold the (+) Button and the
(-) Button until the LCD display screen changes to the phone pairing
screen and you hear a voice prompt, “Phone pairing.”
=HOLD
“Phone pairing”
2. Select 5R LITE in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000. Device B
Pi
Bluetooth
5R LITE
4.1.3 Pairing When the 5R LITE is Turned On
1. While the headset is on, press and hold the Multi-function Button
for 10 seconds.
=10s
HOLD
“Configuration menu”

5R LITE Motorcycle Bluetooth®Communication System | 17
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
2. Tap the (+) Button.
=1x
TAP
“Phone pairing”
3. Select 5R LITE in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000. Device B
Pi
Bluetooth
5R LITE
4.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. Press and hold the Multi-function Button for 10 seconds.
=10s
HOLD
“Configuration menu”
2. Double tap the (+) Button.
=2x
TAP
“Second mobile
phone pairing”

5R LITE Motorcycle Bluetooth®Communication System | 18
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
3. Select 5R LITE in the list of
Bluetooth devices detected. If your
Bluetooth device asks for a PIN,
enter 0000. Device B
Pi
Bluetooth
5R LITE
4.3 GPS Pairing
1. Press and hold the Multi-function Button for 10 seconds.
=10s
HOLD
“Configuration menu”
2. Tap the (+) Button 3 times.
=3x
TAP
“GPS pairing”
3. Select 5R LITE in the list of devices
detected. If your Bluetooth device
asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
5R LITE

5R LITE Motorcycle Bluetooth®Communication System | 19
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.4 Advanced Selective Pairing: Hands-Free or A2DP
Stereo
Phone Pairing allows the headset to establish two Bluetooth profiles:
Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the
headset to separate the profiles to enable connection with two devices.
4.4.1 Phone Selective Pairing - Hands-Free Profile
1. Press and hold the Multi-function Button for 10 seconds.
=10s
HOLD
“Configuration menu”
2. Tap the (+) Button 4 times.
=4x
TAP
“Phone selective
pairing”
3. Select 5R LITE in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000. Device B
Pi
Bluetooth
5R LITE

5R LITE Motorcycle Bluetooth®Communication System | 20
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.4.2 Media Selective Pairing - A2DP Profile
1. Press and hold the Multi-function Button for 10 seconds.
=10s
HOLD
“Configuration menu”
2. Tap the (+) Button 5 times.
=5x
TAP
“Media selective
pairing”
3. Select 5R LITE in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000. Device B
Pi
Bluetooth
5R LITE