Sena 10U User manual

1 2 3 4 5
15.Jun.
10U for Shoei Neotec
Quick Start Guide
Installation
1
3
2
4
Charging
• Red: Charging
• Blue: Fully charged
Button Operation
Press for 1 sec Press and Hold
1” 5” 12”
Tapping
Tap Tap Double Tapping
Move Joystick
Move 1” Move and Hold for 1 sec
Power On/Off
1”
Press
+
Volume Adjustment
Joystick
Move
Joystick
5”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v1.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Joystick
1”
Press
Joystick Move
1”
Mobile Phone Call Making and Answering
Reject
2”
Press
Front Button
Answer
Tap
Rear Button
End
Tap
Rear Button
Voice Dial
Tap
Rear Button
Speed Dial
Tap
Double Tap
Rear Button
DC Power Charging &
Firmware Upgrade Port
Charging LED
Speakers
Snap Holder
Antenna
(+) Button
(–) Button
Battery
Microphone
Status LED
5
Front Button
Status LED
Joystick Rear Button
DC Power
Charging Port Charging LED

6 7 8 9
Joystick
Move
Troubleshooting
Handlebar Remote Disconnection
If the Handlebar Remote becomes disconnected with your headset, recharge
the Handlebar Remote or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset by
gently pushing the pin-hole reset button located on the left
speaker.
Intercom Pairing
Headset A Headset B
Pairing
5”
Press
Front Button
1”
Press
Front Button
5”
Press
Front Button
Front Button
Tap
Front Button
Tap
Intercom Start/End
Front Button
Tap
1st Friend 2nd Friend
Front Button
Tap
Double Tap
3rd Friend
Front Button
Tap
Triple Tap
Radio On/Off
1”
Press
Rear Button
Radio Seek Stations
Joystick Move
1”
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Tap
Rear Button
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Rear Button
Tap
Double Tap
Rear Button
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to
www.sena.com/app for more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
Tap
Rear Button
12”
Press
Front Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: [email protected]