Senco SLS18MG User manual

1
SLS18Mg
18 Gauge Magnesium Stapler
SLS18Mg’s magnesium body delivers an ultra light tool
with SENCO dependability. The oil free design, selective
trigger, rear exhaust and rotating belt hook combine to
provide a tool that will perform the toughest jobs while
delivering professional results and comfortable operation.
Applications:
Cabinets, Sot, Drawer Assembly, Picture
Frames, Case Backs, Craft Assembly
SLS18Mg Features and Benefits:
• Magnesium mainbody provides a durable and ultra light
tool for comfortable extended use.
• Oil free motor eliminates oil carryover onto the work
surface, protecting your hard work.
• Metal cylinder for increased durability.
• Selectable trigger lets you control the fastening method
with the ip of a switch.
• Rotatable rear exhaust and belt hook keeps dust and
debris o the work surface while keeping your tool at
the ready.
• Over-molded rubber grip, swivel plug and reload
indicator will keep you working comfortably and
eciently through out the day.
• Includes case, swivel plug and wrench.
www.senco.com ©2008 by Senco Products, Inc.
Fastener Specifications:
Gauge: 18
Fastener Range: 3/8" – 1 5/8"
Specifications:
Item#: 1W0021N
Reg. Operating Pressure: 70-120 psi (4.8 - 8.3 bar)
Air Consumption (60 cycles per min.): 0.84 scfm
Air Inlet: 1/4" NPT
Tool Weight: 2.59 lbs (1.17 kg)
Height: 9 1/2" (241.3 mm)
Length: 10 1/4" (260.4 mm)
Width: 2 1/2" (63.5 mm)
Fastener Capacity: 110
Genuine SENCO Fasteners Available:
15/8
1
5/8
3/411/4
3/8
1/27/811/811/2
1/4
L
Length Item Code
Carton
Count Finish
Bright Basic
3/4” L11BRB 5M Bright
1” L13BRBN 5M Bright
11/8” L14BRB 5M Bright
11/4” L15BRB 5M Bright
Galvanized
3/8” L06BAB 10M Galv
1/2” L08BAB 10M Galv
5/8” L10BABN 5M Galv
3/4” L11BAB 5M Galv
7/8” L12BAB 5M Galv
1” L13BABN 5M Galv
11/8” L14BAB 5M Galv
11/4” L15BAB 5M Galv
11/2” L17BAB 5M Galv
Stainless
3/4” L11BGA 5M Stainless
11/8” L14BGA 5M Stainless

www.senco.com ©2008 by Senco Products, Inc.
SLS18Mg
18 Gauge Magnesium Stapler
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger re) operates in
the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger and
lift the tool o the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom re) operates in
the following sequence- pull the trigger rst and keep the trigger pulled while moving
the tool along the work surface with a bouncing motion, depressing the safety element
at the nose of the tool against the work surface where the fastener is to be driven. This
trigger is recommended for use by trained professionals only in high production or
volume applications.
Always read the Operators Manual and Safety Instructions with all tool to
ensure proper use and safety precautions. For additional information on
trigger systems and how SENCO will save you time, reduce costs and
increase quality, call our toll-free Action Line: 800-543-4596, or visit our
website at: www.senco.com
Swiveling
Belt hook
Swivel Plug
Oil-less
Engine
Over-molded
Rubber Grip
Reload
Indicator
Rear Exhaust w/
360° Rotation
Magnesium
Alloy Housing
Composite Magazine
Adjustable
Depth of Drive
Selectable
Trigger*