Serta SAVANNAH TWIN SIZE User manual

TOLL FREE 866-626-7826 LIFESTYLE SOLUTIONS
8 of 8 Rev.10142016
SAVANNAH TWIN SIZE
U.S. PATENT NUMBER D719,754S

PARTS AND HARDWARE
Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.
M5 x 30 x 80mm Allen Key
1x
M8 x 50mm Bolt
4x
M8 Washer
(Outer Dim. 24mm)
4x
Leg
4x
Chair Body
1x
Arm
1 Pair
7 of 8
2 of 8
Pillow
2x

3 of 8
6 of 8
ASSEMBLY INSTRUCTIONS
CAUTION: At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).
Align both armrests and chair body together with brackets on both parts facing together.
Lift the sofa body and slot into the brackets of the both armrests as shown.
Carefully place sofa body and parts on a clean flat surface.
Place the arms as bleow. By using wood dowel as a guide, secure two legs into the botttom
of each arm by using bolts, washers and Allen key.
STEP 3 : Lift up the bed cushion from bed tray by using both strap on the front of bed cushion.
Press and adjust the bed cushion to ensure it align with seat cushion.
Finally, please ensure to place the the front of the bed cushion on top of bed tray’s panel.

5 of 8
4 of 8
Converting to Sofa
Standing at the side of the unit (from bed position), lift backrest to the desired position and secure
in place by releasing to the sound of a click.
Converting to Lounger
Standing at the side of the unit (from bed position), lift backrest to the desired position and
secure in place by releasing to the sound of a click.
Converting to Bed
STEP 1 : From sofa or lounger position, lift backrest all the way upwards until the last click is heard
which unlocks the mechanism and carefully return to a flat position.
STEP 2 : Fully pull out the panel of bed tray as shown below.